Globally harmonized system of classification and labeling of chemicals by icsds.com

1. Globally Harmonized System of Classification and Labeling of Chemicals By ICSDS.com http://icsds.com/

2. The UN formulated the Globally Harmonized System of Classification and Labelling of Chemicals, a set of guidelines that would enable greater transparency in recognition of a chemical’s properties and hazards through standardized safety data sheets and Labelling of chemicals. The set of guidelines are not mandatory but countries around the world are incorporating these as a way to mitigate risk and reduce accidents and fatalities. Where incorporated in part or full, compliance to the local regulation becomes mandatory, as it is in the USA, where OSHA has specified these regulations incorporation GHS guidelines. Manufacturers with existing MSDS would require compliance in full by 1st June 2016 with updated SDS and labels according to the fresh guidelines.

3. Interpreting the GHS can be confusing when it comes to detailing the products in the SDS and labels. GHS labeling of chemicals needs to be precise, include the applicable symbols and be worded without ambiguity in order to avoid misunderstanding. This is not an easy task for those not thoroughly familiar with GHS classes and categories and their interpretation as well as applicability. This is where GHS labeling of chemicals by icsds.com proves invaluable. Experts at ICSDS are thoroughly knowledgeable about chemical products, processes, safety, handling and transportation as well as possess an in-depth knowledge of GHS guidelines.

4. Classification and labelling of chemicals is not an easy task when one considers the complexity of GHS hazard groupings. A product may be classified under the physical hazard group, the health hazard group or the environmental hazard group of a combination of any of these. Each of these groups have further sub-classes and categories with sub-categories. Where exactly a product falls is determined precisely by knowledgeable experts at icsds.com. It does require competence and experience to arrive at the right GHS labelling of chemicals. For example, just within the health hazard group, chemicals can be classified for acute toxicity, skin corrosion, eye damage, eye irritation, respiratory sensitization, mutagenicity, carcinogenicity, reproductive toxicity and others. ICSDS can assist with test and fine tuning the specific class. A product that can cause eye irritation can be in the form of an aerosol, in which case it will also fall under the physical hazard group. Aerosols can be damaging to the ozone layer and will therefore also fall under the environmental hazard group. In cases like this, experts at ICSDS determine the main classification and the sub-classification and incorporate this into the labelling of chemicals to GHS norms. The original guidelines must be read together with any applicable, subsequent revisions.

5. Why does any manufacture require expert assistance from icsds.com, a professional SDS authoring service? This is because GHS guidelines are quite extended. Further complicating matters are various revisions made over time starting from 2005 to 2015 that modified classes and categories and introduced new products as well. There have been simplifications as well in the revisions. Further, a country may diverge from GHS guidelines. Experts at icsds.com unravel the complexities, assist with technical tests and also with SDS authoring as well as GHS labelling to ensure complete compliance in a clear, precise, unambiguous way.

6. Contact us • Main Phone (toll free): +1 (877) 308 7411 Fax : Main Phone (toll free): +1 (877) 308 7411 Fax : +1 (613) 237 9145 Mail us: icsds@icsds.comMail us: icsds@icsds.comFor more details visit our site:icsds.com