1 / 22

Workplace Examinations

Workplace Examinations. Who is responsible for making workplace examinations?. Daily Workplace Examinations. Examinations. 30 CFR § 56.18002

ignatius-mcleod
Download Presentation

Workplace Examinations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Workplace Examinations

  2. Who is responsible for making workplace examinations? Daily Workplace Examinations

  3. Examinations 30 CFR § 56.18002 (a) A competent person designated by the operator shall examine each working place at least once each shift for conditions which may adversely affect safety or health. The operator shall promptly initiate appropriate action to correct such conditions.(b) A record that such examinations were conducted shall be kept by the operator for a period of one year, and shall be made available for review by the Secretary or his authorized representative.

  4. Examinations 30 CFR § 56.18002 (c) In addition, conditions that may present an imminent danger which are noted by the person conducting the examination shall be brought to the immediate attention of the operator who shall withdraw all persons from the area affected (except persons referred to in section 104(c) of the Federal Mine Safety and Health Act of 1977) until the danger is abated.

  5. A few examples of potential pre-shift/on-shift hazardous conditions

  6. Loose hazardous material from tops of pits, banks, walls or benches

  7. Chemical containers missing labels

  8. Loose, fractured or overhanging highwalls

  9. Defective stairways, platforms, doors and runways

  10. Defective mobile equipment (lights, brakes, windows, seatbelts, audible warning devices, fluid leaks, etc.)

  11. Condition of roadways, grades, clearance, visibility, traffic, berms or other characteristics of haulage roads

  12. Slip, trip or fall hazards

  13. Insufficient lighting in any area where miners work or travel. Any mobile equipment in use which has not been inspected by the operator for safety defects.

  14. Equipment guards that have been removed and not replaced

  15. Improper storage of material

  16. Improperly blocked equipment raised for repair/service

  17. Torn or missing insulation, loose grounds or exposed electrical wiring

  18. October 14, 2002, a 25-year-old front-end loader operator, with 3 months mining experience was fatally injured at a sand and gravel operation. The victim parked his loader near the toe of a 33 foot highwall and left the operator's cab when material sloughed off the highwall and buried him.

  19. October 21, 2002, a 48-year-old equipment operator with 11 years mining experience was fatally injured at a sand and gravel operation. The victim was operating a front-end loader feeding a power screen plant when he backed one of the wheels over a drop-off. The loader, which was not provided with a ROPS cab, rolled over, crushing the victim.

  20. Correction of Hazardous Conditions 30 CFR § 56.3200 Ground conditions that create a hazard to persons shall be taken down or supported before other work or travel is permitted in the affected area. Until corrective work is completed, the area shall be posted with a warning against entry and, when left unattended, a barrier shall be installed to impede unauthorized entry.

  21. Any Comments or Questions? Skills Video

More Related