330 likes | 606 Views
iglidur polymer plain bearings from igus are lubrication-free, maintenance-free, low cost and versatile. Either for automotive mass production, the aerospace industry, or special machine design, underwater applications, the food and packaging industry, extreme temperatures and chemical resistance, or simple sheet metal applications: iglidur plastic bushings always offer a solution- either from the catalogue range or a special custom solution, with no minimum order.
E N D
iglidur bearings Plain polymer bearings
iglidur plain bearings iglidur polymer plain bearings from igus are lubrication-free, maintenance-free, low cost and versatile. Either for automotive mass production, the aerospace industry, or special machine design, underwater applications, the food and packaging industry, extreme temperatures and chemical resistance, or simple sheet metal applications: iglidur plastic bushings always offer a solution- either from the catalogue range or a special custom solution, with no minimum order.
Standard iglidur bearings You can use one of the five standards – • iglidur® G • iglidur® W300 • iglidur® J • iglidur® X • iglidur® M250 - for almost all applications with non-lubricated, dry-running bushings.
iglidur G- the all-rounder The widest range of differing requirements are fulfilled by iglidur® G bearings. That's why this material is rightly termed universal. Recommended are applications with medium to high loads, medium surface speeds and moderate temperatures.iglidur® G is available as cylindrical bearings, plain bearings with flange and thrust washers. • Maintenance-free, self lubricating • high wear-resistance • Insensitive to dirt and dust • Over 650 dimensions Delivery: ex-stock • Low-priced
iglidur J- the fast and slow motion specialist Versatile in continuous operation, for soft shafts too. The perfect combination of wear-resistant bearings at low to medium loads and best coefficients of friction. Extreme dimension stability even in moist applications.iglidur® J is available as cylindrical bearings, plain bearings with flange and thrust washers. • Low wear with many shaft materials • Low coefficients of friction in dry operation • vibration dampening • Good chemical resistance • Best performance with soft shafts • Lowest humidity absorption
iglidur M250- thick and robust iglidur® M250 bearings are vibration dampening, rugged and wear resistant. In applications with low speeds, they balance edge loads very well and help to minimize noise.iglidur® M250 is available as cylindrical bearings, plain bearings with flange and thrust washers. • Excellent vibration dampening • Insensitive to misalignment • High impact strength • For greater wall thicknesses according to DIN 1850 • Dirt can accumulate
iglidur W300- the endurance runner The specialist for extremely high wear resistance, also for rugged shafts or especially abrasive environmental media. Attain maximum holding times in your applications with iglidur® W300. Dimensions according to ISO 3547-1 and special dimensions iglidur® W300 is available as cylindrical bearings, plain bearings with flange and thrust washers. • For extremely high service life in continuous operation • Low coefficient of friction • extreme high wear-resistance • Suited for rough shafts and stainless steel shafts • Dirt resistant
iglidur X –the high-tech trouble-shooter When it's hot, iglidur® X is the right solution. This is true both literally and figuratively, for instance with extreme chemicals. The interesting thing is the abrasion resistance actually increases at high temperatures.iglidur® X is available as cylindrical bearings, plain bearings with flange and thrust washers. • For operating temperatures from -100°C to + 250°C in continuous operation • Very good chemical resistance • High compressive strength • Lowest humidity absorption • Extremely wear resistant for the entire temperature range
iglidur all-rounder The iglidur® materials are summarized in this group, which virtually have a universal use under normal conditions (temperature, media, etc.). The iglidur® GLW and iglidur® J4 are specially for low-cost solutions in large series. iglidur® P and iglidur® K have a similar potential as iglidur® G paired with significantly reduced moisture absorption, which is advantageous for use in wet environments. • iglidur K • iglidur P • iglidur GLW • iglidur J4 • iglidur P210
iglidur K- versatile, wear-resistant universal material iglidur® K is the new low-priced universal bearing for medium temperatures and applications with various environmental conditions like humidity and media.iglidur® K is available as cylindrical bearings and plain bearings with flange. • lubricant- and maintenance-free • Lowest humidity absorption • wear-resistant • Low-priced
iglidur P – cost efficient and maintenance free Due to heat stability and low moisture absorption, the iglidur® P bearings are extremely dimension stable in varying ambient conditions. Recommended for rotary movements with medium to high loads.iglidur® P is available as cylindrical bearings and plain bearings with flange. • Low water absorption • High load capacity • Low-priced • Low wear rates
iglidur GLW – strong and cost-effective Pressure-resistant Low-Cost material for large volumes. Low-Cost-material for medium stressing capacity. iglidur® GLW bearings are preferentially used in applications with static load, in which the bearing points move only occasionally.iglidur® GLW is available as cylindrical bearings and plain bearings with flange. • versatile use • Maintenance-free, self lubricating • Low-priced • Insensitive to dirt • Insensitive to vibrations
iglidur J4- low cost and low wear New as standard range: iglidur® J4 is the new low-cost material for long lifetimes for low to medium loads. • Zero lubrication, zero maintenance • Low-cost-material for large volumes • Low coefficients of friction • Media resistant • Lowest humidity absorption
iglidur P210- versatile & rugged The material with versatile use has already proven its worth in numerous customer-specific solutions and as a bar stock material. Clip-on or pretension designs as well as the use in the vehicle interior are possible. Now iglidur® P210 is also available in the standard size range. • Lubricant- and maintenance-free • Lowest humidity absorption • Good for edge loads • Viscoplastic • extremely wear-resistant, especially at pivoting loads up to 20 MPa Application areas: Automotive construction, mechanical engineering, fittings, actuators, fitness equipment
iglidur – endurance run Every iglidur® bushing is naturally optimized for wear, but the materials in this group are characterized by, like the standards iglidur® J and iglidur® W300, particularly low rates of wear, or in other words a long service life. Besides the absolute service life and price level, they differ inter alia in terms of potential temperature and load ranges, and the applicability in conjunction with special shaft materials. • iglidur J 260 • iglidur J 3 • iglidur J 350 • iglidur L 250 • iglidur R • iglidur D • iglidur J 200
iglidur J260- ideal for plastic shafts Time and again the iglidur® J260 material proves its worth where the maximum service life and best friction coefficients are required under special application conditions - particularly in connection with plastic shafts!iglidur® J260 is available as cylindrical bearings and plain bearings with flange. • lubricant- and maintenance-free • Very good c.o.f. for low or medium loads • Slightly higher temperatures than with iglidur® J • Longer life time - even on polymer shafts
iglidur J3 – runs longer iglidur® J3 is our new material with increased wear resistance at low to medium loads and high speeds. The service life is up to 300% higher than in iglidur® J - the proven top endurance runner material.iglidur® J3 is available as cylindrical bearings and plain bearings with flange. • lubricant and maintenance-free • Low coefficients of friction • Media resistant • Lowest humidity absorption • PTFE free
iglidur J350- temperature resistant High wear resistance in rotation A superior plain bearing for rotary applications – and on many different steel shafts: With iglidur® J350 plain bearings, the service life can often be increased many times at loads between 2 MPa and 50 MPa. The high temperature resistance allows a wide range of applications. iglidur® J350 is available as cylindrical bearings and plain bearings with flange. • Very low coefficient of friction on steel • For continuous use in up to +180°C • For medium till high loads • Particularly well suited for rotations
iglidur – L250 – for fast rotations Bearings for fast rotary motions like, for instance, in fans and small motors.iglidur® L250 is available as cylindrical bearings and plain bearings with flange. • specially developed for fast rotating applications • Very low coefficients of friction • Excellent wear resistance
iglidur R Low-cost-material with low coefficients of friction and good wear resistance at low to medium loads.iglidur® R is available as cylindrical bearings and plain bearings with flange. • Good abrasion resistance • Low coefficients of friction in dry operation • Very cost efficient • Lowest humidity absorption
iglidur D- low cost-material with silicon Low-cost-material with low coefficients of friction and good wear resistance at low loads.iglidur® D is available as cylindrical bearings and plain bearings with flange. • Low coefficients of friction at high speeds • For low loads • Very cost efficient • vibration dampening • Lowest humidity absorption
iglidur J200- specifically for aluminium shafts The specialist for extremely low coefficients of friction and minimum wear on anodized aluminium shafts.iglidur® J200 is available as cylindrical bearings and plain bearings with flange. • Extreme service life on anodized aluminium • Low friction coefficient • Low wear • For low to medium loads
iglidur- high temperatures till 250° C Here you will find high-temperature specialists for continuous operating temperatures up to 250°C (exception: iglidur® V400 with 200°C). In the meantime, the iglidur® X6 surpasses the standard iglidur® X here in many rotary and pivoting applications. iglidur® Z has also been long established as standard with extremely low wear rates • iglidur V400 • iglidur X6 • iglidur Z • iglidur UW500
iglidur V400- wear resistant at high temperatures High media- and temperature resistance. Highly wear-resistant bearing material for soft shafts and temperatures up to 200°C with low moisture absorption and excellent resistance to chemicals. iglidur® V400 is available as cylindrical bearings and plain bearings with flange. • Extreme wear resistance with soft shafts and in high temperatures up to +200°C • Chemical resistant • High elasticity
iglidur X6- nano material Service life up to six times higher than in iglidur® X. Thanks to nano-technology, iglidur® X6 has a service life of up to six times longer than the heavy duty iglidur® X bearing - even beyond 100°C.iglidur® X6 is available as cylindrical bearings and plain bearings with flange. • lubricant- and maintenance-free • Long term service temperature up to +250°C • Up to 50% better press fit as iglidur® X • High compressive strength • Very good chemical resistance • PTFE free
iglidur Z- the high temperature material Extremely high compressive strength coupled with high elasticity enables iglidur® Z bearings to attain their prominent features in association with soft shafts, edge loads and impacts. The bearings are at the same time suitable for temperatures up to +250°C.iglidur® Z is available as cylindrical bearings, plain bearings with flange and thrust washers. • Excellent wear resistance especially with high loads • High thermic stability • For extreme loads • Also for high surface speeds • Insensitive to edge loads
iglidur UW500- underwater bearings For use in hot liquids. iglidur® UW500 was developed for high temperature (up to +200 ℃) applications in liquid media. With additional lubrication, the bearings can operate in chemicals. iglidur® UW500 is available as cylindrical bearings and plain bearings with flange. • For underwater application at high temperatures • For fast and continuous movements
iglidur-high media resistance, temperature to 200°C Almost at the same level as the previous group in terms of temperatures, the "iglidur® H family" is characterized by a high media resistance and a wide range of applications in the wet area. iglidur® H370 is the specialist for underwater applications, iglidur® H2 is the media-resistant, low-cost bushing solution for high volume production with low running performance and iglidur® H1, the endurance runner of this group. • iglidur H • iglidur H1 • iglidur H2 • iglidur H370 • iglidur C500
iglidur H- for the wet areas Resistant to chemicals and suitable for temperatures up to +200°C. Very low coefficients of friction in association with hardened shafts.iglidur® H is available as cylindrical bearings and plain bearings with flange. • Usable underwater • Maintenance-free solution • For high temperatures • Chemical resistant
iglidur H1- the endurance runner for high temperatures iglidur® H1 is the first choice when high holding times are required in extreme environmental conditions. Extreme wear resistance is coupled with excellent resistance to temperature and chemicals - not only in the packaging and foodstuff industries or the automotive industry.iglidur® H1 is available as cylindrical bearings and plain bearings with flange. • High wear resistance in extreme ambient conditions • Very low coefficients of friction • High resistance to temperature and chemicals • For applications in the engine compartment
iglidur H2 Cost-effective high-temperature bearing up to 200°C Media resistant Low-Cost-material. For application with high temperature requirements Can be conditionally used in dry operation; excellent properties with additional lubrication.iglidur® H2 is available as cylindrical bearings and plain bearings with flange. • Usable underwater • Low-priced • Chemical resistant • For high temperatures
iglidur H370- the best for wet areas iglidur® H370 is the right solution for underwater applications. The bearings absorb extremely high loads, resist chemicals and can be used at temperatures up to +200°C.iglidur® H370 is available as cylindrical bearings and plain bearings with flange. • Wear-resistant - especially under water • High temperature resistance -40°C to +200°C • High resistance to chemicals
Iglidur C500- versatile in chemicals Noted material, new colour: iglidur® C500 can be used in up to 250°C and is extremely resistant to media - even in cleaning processes using hydrogen peroxide - wear resistant and has low coefficients of friction. Also suitable for various special geometries. The colour represents extreme environmental conditions and is clearly distinguishable for storage and assembly purposes. • Lubricant- and maintenance-free • High resistance to media and temperature • Resistant to water vapour • Good coefficients of friction and wear Application areas: Chemical production, filling technology, plant construction, valve technology, medical and food technology