260 likes | 284 Views
When your car does not accelerate and starts to limp, then it requires some serious repairs. But, if the reason is small, you can also fix it by doing certain things like disconnect the battery, apply the brakes, check the transmission fluid and set up a car diagnostic scanner. See the mentioned slideshow to find more details on methods you can follow to handle the limp mode of the car.
E N D
If you ever feel that when you are increasing the speed of the car, suddenly you found that the engine light is glowing on the car dashboard and unable to shift the gear.
It is defined as a mechanical failure which activates the limp mode of the car. If you want to reset the mode, then you have to learn the way to handle it.
Thus, the limp mode of the car is a foolproof mechanism which is used to protect the car and inhabitant them from further damages.
Through the limp mode, the computer system implying the transmission issues of the car by generating an emergency signal.
The following methods help you to handle the limp mode related issues in your car.
Sometime the transmission of the car may have a loose internal connection. In this case, you have to stop the car at a safe place and open the bonnet.
Then you have to detect the car battery and detach their connections. But before you reconnect them you have to wait for about half an hour.
After you reconnect the battery, restart the car. As a result, the limp mode of the car deactivates automatically.
To handle he limp mode of the car, deactivate the limp mode and apply the brakes to stop the car at a safe spot.
Leave them for five minutes to rest and ensure that the inbuilt computer system of the car disables every mechanism inside the car.
After five-minute power up the car and try to shift the gears. If you successfully shift the gears, then it will automatically deactivate the limp mode.
The common reason behind the activation of a limp mode is the leakages found in the automatic transmission fluid.
When the fluid level of the car is low in the engine, then your car will lose its control and trigger the limp mode.
So, in this case you have to stop the car at a level surface and read the fluid level by lifting the hood. The limp mode will be deactivated when you pour enough fluid in it.
By installing a diagnostic scanner in a car help to detect the coded error messages produced by the car sensor.
It is not only finding the reason behind the activate limp mode but also finds the issues related with the boost deviation of the car.
When the boost deviation error occurs in your car, it leads to limp mode activation. As a result, you have to reset the check engine light.
The limp mode of the car indicates the transmission system problems in your car which needs your immediate attention.
By following the above points you can easily handle the limp nodes of the car and if necessary then visit a mechanic for further repair.
https://importmotorworx.com/ https://www.facebook.com/ImportMotorWorxSouthBay/ https://twitter.com/importmotorworx/ THANK YOU