Most Essential AutoCAD Commands

1. Essential AutoCAD Commands This presentation summarizes all the very common and essential commands useful to know for every AutoCAD expert.

2. Essential AutoCAD Commands website: admecindia.co.in Email ID: info@admecindia.co.in Created By: Mukesh Gupta ADMEC Multimedia Institute C-7/114, 2nd Floor, Sector-7, Rohini, Delhi:110085 Mob: +91-8377861642, 9999492155

3. What does AutoCAD Mean? Cad full-form is computer-aided design or drafting (CAD) and program used for 2D and 3D design and drafting. And it was one of the initial CAD programs that could be executed on the personal computers. The (cad) first release of the software (application) used only primaeval existence such as a line, arc polygon, poly-line, circle, rectangle and difficult objects.

4. Engineers... • Architecture Engineers:- Architecture Engineers are make a good plan according by client as buildings or home and much more. He create a drawings for home design. Civil engineers are prepare a foundation for a roads and fly overs and pull and much more.

5. MechanicalEngineers • Mechanical Engineers is a diversified subject that obtain its broadness from the designs and he was prepare a mechanical device. He build a machinery system, , foundations and other things.

6. Electrical Engineers • Electrical drafters are preparing a technical drawing of the electrical wiring system and machinery system. • Since the drawing process they are very alert and give a sketch drawing so get a final designs.

7. Introduction Of Commands • Line Command:- Line command create a drawing. that is a very important command in autocad. first type “L” than enter in command prompt, and draw a line his according.

8. Move command • Move command type “M” than enter in command prompt: you can go tools bar in auto-cad and select move command. • Move command change the of objects, if you want the any objects move so you can use this command.

9. Rotate Command • Type “R” than enter in command prompt: If you want the any objects to rotate, so you can use the rotate command. • Rotate command do turn the any objects you can create a angle value his according.

10. Join Command • Type “J” than enter in command prompt: If you want the any line to join so you can do it, • You can select a line and give a source point than select a target point than enter your line is join.

11. Complete AutoCAD Training - Contact Us - ADMEC MULTIMEDIA INSTITUTE Leader in Animation & Digital Media Education ISO 9001 : 2008 CERTIFIED - Visit Our Websites - www.admecindia.co.in www.cadtraininginstitute.com Phones: +91-9811-8181-22, +91-9911-7823-50

12. Trim Command • Type “Tr” than double enter in command prompt: Trim command modify the edge of the shapes OR trimed, Trim command apply the enter-set objects which boundary are trim.

13. Extend Command • Type “Ex” than double enter in command prompt: extend command to use the any one line to extend,first select a line and define the source and boundary edge.

14. Mirror Command • Type “Mi” than enter in command prompt: If you want the any objects to mirror so you can select the object than enter and give a base point and end point to prepare a object.

15. Region Command • Type “Reg” than enter in command prompt: if you want the any objects to change the compound objects so you can select region command. The offset command is not use the region command.

16. Multiple Copy Command • Type “Co OR Cp” than enter in command prompt: if you want the multiple object so you can select the copy command and click the objects and give a base point and create a objects.

17. Offset Command • Type “O” than enter in command prompt: If you want the offset to any objects so you can create a specified distance or through a point. OR • You can give a value to offset objects.

18. Explode Command • Type “X” than enter in command prompt: Explode command used the compound objects to change the polyline objects. If you want the compound objects to change the polyline so you can select the objects and type x than enter.

19. Spline Command • Type “Spl” than enter in command prompt: Spline to create a smooth curve that achieveXment and prepare a any objects he doing freehand work while you are apply the spline,to keep ortho off.

20. Circle Command • Type “C” than enter in command prompt: Circle command is depends on the two access: • Radius(dra+enter) • Diameter(ddi+enter)

21. Complete AutoCAD Training - Contact Us - ADMEC MULTIMEDIA INSTITUTE Leader in Animation & Digital Media Education ISO 9001 : 2008 CERTIFIED - Visit Our Websites - www.admecindia.co.in www.cadtraininginstitute.com Phones: +91-9811-8181-22, +91-9911-7823-50

22. Ellipse Command • Type “el” than enter in command prompt: Ellipse command is depends on the two access: • Major • Miner

23. Point Command • Type “Po” than enter in command prompt: OR Go to Formate — Point Style Point command is depends on the two access: • Divid (div+enter) • Measure (me+enter)

24. Rectangle Command • Type “Rec” than enter in command prompt: If you want the rectangle so you are select the rectangle and first click the and second click or give a value to create a rectangle.

25. Array Command • Type “Ar” than enter in command prompt: Array command is depends on the three access: • Rectangle • Polar • Path

26. Fillet Command . • Type “F” than enter in command prompt: If you want the radius(smoothness,roundness)in rectangle so you can used the fillet command. Fillet command create a roundness (zigzag) corner between two lines. `

27. Chamfer Command • Type “Cha” than enter in command prompt: • If you want the creates a bevelled corner. so you are used the chamfer command.

28. Poly-line Command • We can type “Pl” than enter in command prompt: Mostly pline command used in 3D.Because pline command is already joint, so we are use create a drawing or plan. • Poly Edit:-If you want the poly-line edit so you can type“Pe” than enter.

29. Polygon Command • We can type “pol” than enter in command prompt: • First create number of polygon, Polygon command is depends on the two access:- • Inscribed (You are corner man-tan in circle) • Circumscribed( You are edge man-tan out of circle).

30. Block... • We can type “B” than enter in command prompt: We are used this command for save object, You are create a objects and this command. • Insert Block:- which object we are save that is open by insert block,You can type“I” than enter.

31. Complete AutoCAD Training - Contact Us - ADMEC MULTIMEDIA INSTITUTE Leader in Animation & Digital Media Education ISO 9001 : 2008 CERTIFIED - Visit Our Websites - www.admecindia.co.in www.cadtraininginstitute.com Phones: +91-9811-8181-22, +91-9911-7823-50

32. Hatching Command • We can type “H” than enter in command prompt and use it: If we want the any object create a solid object, so we are used this command, OR • You want the used to create tonal or shading effects, closely full colour so used it.

33. Match Property • We can type “Ma” than enter in command prompt: If you want the any shape match other shapes so you are used it. First click the original shapes than enter and second click on the match shapes.

34. Text Command • Single Text • Multi-line Text

35. Single Text • We are talking single text • You can type “DT” than enter in command prompt: • Mostly if you want the short word write so you are used it. • Text Style:-If you want the change text style you can go to, Formate Menu bar ---------- Text Style

36. Text Style

37. Single Text • Property Panel: If we want the change the size, colours, and any more sittings of current text , So you can go to property panel and change the settings of the text.

38. Multi-line Text • Now we are talking the Multi-line text You can type “MT OR T” than enter in command prompt: Mostly we are write a large content so we are used it. Column: If you want the write a letter in a column so you are select a static column or dynamic column. Gutter: The distance between two columns is called gutter.

39. Multi-line Text • Paragraph: If you want the content man-tan so you can go to paragraph and change the aligned and you can put the content his according as (left, right, up, down,top,bottom) and you are put as (centre, justified, align) and much more... • Tracking: If you want the man-tan between two words space, So you can select the tracking.

40. Multi-line Text • Number OR Bullet: If you want the create a bullet on the paragraph,So you can select the bullet... • Modify Text: If you want the edit text so you can double click on the word. OR You can type “ED” than enter in command prompt.

41. Multi-leader • If you want the open this panel so you can go Tools Menu bar ----Tool---- Auto-cad ---- Multi-leader This command is mostly used for give a radius and diameter of circle. • Multi-leader Style: You can go Formate ----- Multi-leader Style

42. Layer... • You can type “La” than enter in command prompt: Formate menu bar ----- Layer Mostly, while we are prepare a drawing when used the layer, because we are create a separate work on the layer as( wall, door, window, railing, dimension, beam, and any other content on the layer).

43. Layer

44. Modify Commands • Lengthen: We can type “Len” than enter in command prompt: • If you want the line command extend or remove, So you can used this command OR • If you want the line maintain, So you can used Lengthen command.

45. Modify Commands • Stretch Command: We can type “S” than enter in command prompt: • If you want the rectangle command maintain, So you can select stretch command. OR • You can double click on the rectangle when you are maintain the rectangle.

46. Scale... • You can type “Sc” than enter in command prompt: If we want the maintain scale, So you can used this command.

47. 3D Commands... Solid Editing • Extrude Command: You can type “EXT” than enter in command prompt: Extrude command mostly used in create allow a solid objects from the content. This command used boundary content(objects).

48. Presspull Command • You can type “Pres” than enter in command prompt Press-pull command used only closed content(objects). while we are not joint object that is not support.

49. Orbit... • If we want the see any 3D navigation command mode as (top, bottom, front, left, right) so used it.

50. Union Command • Union command used for two or more line to combined in content. OR • Union command subsets the line are joined separately.