1 / 53

DESY Summer Student Lecture 31 st July 2002

An Introduction to the Physics and Technology of e+e- Linear Colliders Lecture 7: Beam-Beam Effects Nick Walker (DESY). DESY Summer Student Lecture 31 st July 2002. USPAS, Santa Barbara, 16 th -27 th June, 2003. Introduction.

ion
Download Presentation

DESY Summer Student Lecture 31 st July 2002

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. An Introduction to thePhysics and Technologyof e+e- Linear CollidersLecture 7: Beam-Beam EffectsNick Walker (DESY) DESY Summer Student Lecture31st July 2002 USPAS, Santa Barbara, 16th-27th June, 2003

  2. Introduction • Beam-beam interaction in a linear collider is basically the same Coulomb interaction as in a storage ring collider. But: • Interaction occurs only once for each bunch (single pass); hence very large bunch deformations permissible. • Extremely high charge densities at IP lead to very intense fields; hence quantum behaviour becomes important • Consequently, can divide LC beam-beam phenomena into two categories: • classical • quantum

  3. Introduction (continued) • Beam-Beam Effects • Electric field from a “flat” charge bunch • Equation of motion of an electron in flat bunch • The Disruption Parameter (Dy) • Crossing Angle and Kink Instability • Beamstrahlung • Pair production (background)

  4. Storage Ring Collider Comparison Linear beam-beam tune shift Putting in some typical numbers (see previous table) gives: Storage ring colliders try to keep

  5. Electric Field from a Relativistic Flat Beam • Highly relativistic beam E+vB  2E • Flat beam sx  sy (cf Beamstrahlung) • Assume • infinitely wide beam with constant density per unit length in x ( r(x)) • Gaussian charge distribution in y: • for now, leave r(z) unspecified

  6. Electric Field from a Relativistic Flat Beam Use Gauss’ theorem: Assuming Gaussian distribution for z, the peak field is given by

  7. Electric Field from a Relativistic Flat Beam Note: 2Ey plotted Assuming a Gaussian distribution for r(z)

  8. Electric Field from a Relativistic Flat Beam effect of x width Assuming a Gaussian distribution for r(z)

  9. Equation Of Motion F = ma: Changing variable to z: whyrz(2z)?

  10. exact: Linear Approximation and the Disruption Parameter Taking only the linear part of the electric field: Take ‘weak’ approximation: y(z) does not change during interaction y(z) = y0 Thin-lens focal length: Define Vertical Disruption Parameter

  11. Number of Oscillations Equation of motion re-visited: Approximate r(z) by rectangular distribution with same RMS as equivalent Gaussian distribution (sz) half-length!

  12. Example of Numerical Solution green: rectangular approximation black: gaussian

  13. Pinch Enhancement • Self-focusing (pinch) leads to higher luminosity for a head-on collision. ‘hour glass’ effect Empirical fit to beam-beam simulation resultsOnly a function of disruption parameter Dx,y

  14. The Luminosity Issue: Hour-Glass b = “depth of focus” reasonable lower limit for b is bunch length sz

  15. Luminosity as a function of by

  16. Beating the hour glass effect Travelling focus (Balakin) • Arrange for finite chromaticity at IP (how?) • Create z-correlated energy spread along the bunch (how?)

  17. Beating the hour glass effect Travelling focus • Arrange for finite chromaticity at IP (how?) • Create z-correlated energy spread along the bunch (how?)

  18. Beating the hour glass effect Travelling focus • Arrange for finite chromaticity at IP (how?) • Create z-correlated energy spread along the bunch (how?) ct

  19. Beating the hour glass effect foci ‘travel’ from z = 0 to z = chromaticity: travelling focus: NB: z correlated!

  20. 1 2 3 6 5 4 The arrow shows position of focus for the read beam during travelling focus collision

  21. Kink Instability Simple model: ‘sheet’ beams with: Linear equation of motion becomes Need to consider relative motion of both beams in t and z: Classic coupled EoM.

  22. Kink Instability Assuming solutions of the form and substituting into EoM leads to the dispersion relation: Motion becomes unstable when w2 0, which occurs when

  23. Kink Instability Exponential growth rate: Maximum growth rate when Remember! Thus ‘amplification’ factor of an initial offset is: For our previous example with Dy ~28, factor ~ 3

  24. Kink Instability

  25. Pinch Enhancement H= enhancement factor results ofsimulations:

  26. High Dy example: TESLA 500

  27. Numbers from our previous example give OK for horizontal plane where Dx<1 For vertical plane (strong focusing Dy > 1), particles oscillate: Disruption Angle Remembering definition of Dy The angles after collision are characterised by previous linear approximation:

  28. Disruption Angle: simulation results horizontal angle (mrad) vertical angle (mrad) Important in designing IR (spent-beam extraction)

  29. Beam-Beam Animation Wonderland Animations produced by A. Seryi using the GUINEAPIG beam-beam simulation code (written by D. Schulte, CERN).

  30. Examples of GUINEAPIG Simulations NLC parameters Dy~12 Nx2 Dy~24

  31. Examples of GUINEAPIG Simulations NLC parameters Dy~12 Luminosity enhancement HD ~ 1.4 Not much of an instability

  32. Examples of GUINEAPIG Simulations Nx2 Dy~24 Beam-beam instability is clearly pronounced Luminosity enhancement is compromised by higher sensitivity to initial offsets

  33. Beam-beam deflection Sub nm offsets at IP cause large well detectable offsets (micron scale) of the beam a few meters downstream

  34. Beam-beam deflectionallow to control collisions

  35. Examples of GUINEAPIG Simulations

  36. Examples of GUINEAPIG Simulations

  37. Beam-Beam Kick Beam-beam offset gives rise to an equal and opposite mean kick to the bunches – important signal for feedback! For small disruption ( D1) and offset (y/sy<<1) For large disruption or offset, we introduce the form factor F:

  38. Long Range Kink Instability & Crossing Angle To avoid parasitic bunch interactions in the IR, a horizontal crossing angle is introduced: angle fc parasitic beam-beam kick:

  39. Long Range Kink Instability & Crossing Angle y IP small vertical offset (D = dy/sy) gives rise to beam-beam kick e- e+ y l resulting vertical offset at parasitic crossing gives next incoming bunches additional vertical kick: IP offset increases instability

  40. Long Range Kink Instability & Crossing Angle offset at IP of k-th bunch: distance from IP to encounter with l-th bunch (l < k) contribution from encounter with l-th bunch: NB. independent of llk total offset:

  41. Long Range Kink Instability & Crossing Angle Assuming all bunches have same initial offset: For small disruption and small offsets, since where mb = number of interacting bunches thus example:Dx,y = 0.1, 10sx = 220 nmsz = 100 mmfc = 20 mrad C = 0.012  mb < 80 for factor of 2 increase

  42. Crab Crossing x factor 10 reduction in L! use transverse (crab) RF cavity to ‘tilt’ the bunch at IP x RF kick

  43. Beamstrahlung Magnetic field of bunch B = E/c Peak field: From classical theory, power radiated is given by For E = 250 GeV and sz = 300mm: DE/E ~ 12% note:

  44. Beamstrahlung Most important parameter is  critical photon frequency Compton wavelength local bending radius beam magnetic field Schwinger’s critical field (= 4.4 GTesla) em field tensor electron 4-momentum

  45. Beamstrahlung: photon spectrum NOT classical synchrotron radiation spectrum!Need to use Sokolov-Ternov formula: quantum theoretical classical

  46. Beamstrahlung Numbers average and maximum  photons per electron: average energy loss: dBS and ng (and hence ) talk directly to luminosity spectrum and backgrounds

  47. Beamstrahlung energy loss In lecture 1, we used the following equation to derive our luminosity scaling law Now we have this: with under what regime is our original expression valid?

  48. Luminosity scaling revisited low beamstrahlung regime 1: high beamstrahlung regime 1: homework: derive high BS scaling law

  49. Beamstrahlung Numbers: example TESLA

  50. Why Beamstrahlung is bad • Large number of high-energy photons interact with electron (positron) beam and generate e+e- pairs • Low energies (<0.6), pairs made by incoherent process(photons interact directly with individual beam particles) • High energies (0.6<<100), coherent pairs are generated by interaction of photons with macroscopic field of bunch. • Very high energies (U>100), coherent direct trident production e  e e+ e-TESLA 0.5TeV  ~ 0.06NLC 1TeV  ~ 0.28CLIC 3TeV  ~ 9 • Beamstrahlung degrades Luminosity Spectrum

More Related