1 / 8

Lecture 8 Elements of Soil Mechanics

Lecture 8 Elements of Soil Mechanics. Phase relationships of earth materials Effective stress Shear strength Settlement and consolidation

isaura
Download Presentation

Lecture 8 Elements of Soil Mechanics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture 8 Elements of Soil Mechanics • Phase relationships of earth materials • Effective stress • Shear strength • Settlement and consolidation • Soil mechanics concerns with the action of forces on soil masses. It involves the understanding and prediction of soil behaviors for engineering designs or uses as construction materials. Soil mechanics is a major component of the field of study known as Geotechnical Engineering.

  2. Phase relationships of earth materials (pp 106-113) • Earth materials have three phases system, including solid, water, and air. Water and air occupy voids between solid particles. For soils, the physical weight volume relationship between these phases are particularly important. The relationship can be examined using a schematic solid-water-air phase diagram.

  3. Effective stress (pp. 129-132) • Consider a layer saturated with water beneath the surface. The total stress produced by the overlying layers is opposed from below by both the stress transmitted through the solid grains of the layer and the hydrostatic pore fluid pressure. Thus the stress acting between the solid grains (called effective stress) in effect is the total stress subtracted by the pore pressure.

  4. Shear strength of soils (pp. 133-139) • The strength of a soil indicates the stress that the soil can sustain until failure (displacement or excessive deformation). • In soil mechanics, the shear strength is the main concern because most failures result from excessive shear stresses. The shear strength of a soil determines its ability to support the load of a structure or remain stable on a slope.

  5. Settlement and consolidation (pp. 143-145) • Consolidation is the reduction in volume of a soil under load as water drains from the pores. Settlement is the vertical subsidence of the building as the soil is compressed. Excessive settlement, particularly when it is unevenly distributed, can result in serious damage to the structure. • Typically, the void ratio is plotted against the log of the effective consolidation pressure. The slope of this compression curve is called compression index of the soil.

  6. The marks on this utility pole (left) indicate the level of the surrounding land in preceding years. Between 1925 and 1975 this part of the San Joaquin Valley (right) subsided almost 9 meters because of the withdrawal of groundwate and the resulting compaction of sediments.

  7. Subsidence of buildings in Mexico City resulted from compaction after groundwater was pumped from unconsolidated sediment beneath the city. Subsidence has caused this building to tilt and sink more than 2 m.

  8. The Leaning Tower of Pisa. The tilt is the result of nonuniform consolidation of soil beneath the structure.

More Related