1 / 10

Composite demo

Typeface Calibri for the entire presentation. Headline in CAPITAL, 36 pt, Bold and Seco red Gridsystem to be used for the header image Be careful not to move the grid system. Composite demo. Demo Set- up. Thermoset & Thermoplast CFRP’s.

jabari
Download Presentation

Composite demo

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TypefaceCalibri for the entire presentation. Headline in CAPITAL, 36 pt, Bold and Seco red Gridsystem tobe used for the headerimage Be careful not tomove the grid system. Composite demo

  2. Demo Set- up Thermoset & Thermoplast CFRP’s Cutters selected: JPD890, JPD891, JC840, JC871 & JC880

  3. Up/Down milling& Fiber direction

  4. Thermoset T800 PCD Cutters • Cutting data for the JPD890100E2S.0Z2A • Vc: 563 m/min • Fz: 0.022 mm/tooth • Ap: 5.0mm cut depth • Ae: 10mm step over • N: 17910 rpm • Vf: 800 feed • Cutting data for the JPD891100E2S.0Z2A • Vc: 563 m/min • Fz: 0.022 mm/tooth • Ap: 5.0mm cut depth • Ae: 10mm step over • N: 17910 rpm • Vf: 800 feed

  5. Thermoset T800 Solid carbide Cutters • Cutting data for the JC880100R020Z4.0-DURA • Vc: 100 m/min • Fz: 0.06 mm/tooth • Ap: 8.5 mm cut depth • Ae: 10 mm step over • N: 3180 rpm • Vf: 765 mm/min • Cutting data for the JC871100.0-DURA • Vc: 100 m/min • Fz: 0.020 mm/tooth • Ap: 5.0 mm cut depth • Ae: 10 mm step over • N: 3180 rpm • Vf: 1020 mm/min

  6. Thermoset T800 Solid carbide Cutters • Cutting data for the JC840100R050Z7.0-DURA • Vc: 100 m/min • Fz: 0.048 mm/tooth • Ap: 5.0mm cut depth • Ae: 1.0mm step over • N: 3980 rpm • Vf: 1145 feed

  7. Thermoplast T800 PCD Cutters • Cutting data for the JPD890100E2S.0Z2A • Vc: 500 m/min • Fz: 0.18 mm/tooth • Ap: 5.0mm cut depth • Ae: 10mm step over • N: 15918 rpm • Vf: 2865 feed • Cutting data for the JPD891100E2S.0Z2A • Vc: 500 m/min • Fz: 0.18 mm/tooth • Ap: 5.0mm cut depth • Ae: 10mm step over • N: 15918 rpm • Vf: 2865 feed

  8. Thermoplast T800 Solid carbide Cutters • Cutting data for the JC880100R020Z4.0-DURA • Vc: 150 m/min • Fz: 0.06 mm/tooth • Ap: 8.5mm cut depth • Ae: 10mm step over • N: 4770 rpm • Vf: 1145 feed • Cutting data for the JC871100.0-DURA • Vc: 150 m/min • Fz: 0.020 mm/tooth • Ap: 5.0mm cut depth • Ae: 10mm step over • N: 4770 rpm • Vf: 1525 feed

  9. Thermoplast T800 Solid carbide Cutters • Cutting data for the JC840100R050Z7.0-DURA • Vc: 160 m/min • Fz: 0.048 mm/tooth • Ap: 5.0mm cut depth • Ae: 1.0mm step over • N: 6370 rpm • Vf: 1835 feed

  10. New Technical guide on www.secotools.com

More Related