1 / 15

Linear Interpolation

Linear Interpolation. Applying “weighted averages” to some graphics problems: animations and curve-drawing. What does ‘between’ mean?. B1. The green point G lies between the two blue points B1 and B2 . P. G. B2. The pink point P does NOT lie between

jaden
Download Presentation

Linear Interpolation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Linear Interpolation Applying “weighted averages” to some graphics problems: animations and curve-drawing

  2. What does ‘between’ mean? B1 The green point G lies between the two blue points B1 and B2 . P G B2 The pink point P does NOT lie between the two blue points B1 and B2.

  3. Using a “weighted average” • Suppose (x1,y1) and (x2,y2) are points • The point located half-way in-between is: midpoint = (½)(x1,y1) + (½)(x2,y2) • It’s the “average” of (x1,y1) and (x2,y2) • Here’s another point on the line-segment that lies between (x1,y1) and (x2,y2): (x’,y’) = (¼)(x1,y1) + (¾)(x2,y2) • It’s a “weighted average” of the endpoints

  4. The generalization • Let B1 = (x1,y1) and B2 = (x2,y2) be the two endpoints of a line-segment. Suppose w1 and w2 are “weights” (i.e., neither is negative, and their sum equals 1). Then the point P = w1*B1 + w2*B2 is called a “weighted average” of B1 and B2 , and P will be located “in-between” B1 and B2. • Here P is obtained by “linear interpolation”

  5. Describing a line-segment • Mathematical description of line-segments • Let B1 = (x1,y1) and B2 = (x2,y2) be the two end-points of a given line-segment • Let t be a real number whose value can vary continuously, from 0.0 to 1.0 • Then point P = (1-t)*B1 + t*B2 will vary continuously over the entire line-segment, starting at B1 (when t=0.0) and ending up at B2 (when t=1.0)

  6. Animating a line-segment final position initial position in-between positions

  7. The programming idea • We only need to specify the segment’s two endpoints at the start and the finish • As the segment moves all its intermediate endpoint locations are then calculated as linear interpolations (“weighted averages”) • This idea can be simultaneously applied to lots of different line-segments (e.g., to all the sides of a polygon, or to all the “edges” in a wire-frame model)

  8. The ‘polyline’ structure typedef struct { float x, y; } point_t; typedef struct { int numverts; point_t vert[ MAXVERT ]; } polyline_t; // declare two polylines (for start and finish) // and a variable polyline (for “in-betweens”) tween[i].x = (1-t)*B1[i].x + t*B2[i].x; tween[i].y = (1-t)*B1[i].y + t*B2[i].y;

  9. The ‘tweening.cpp’ demo • We illustrate this idea for animating simple polygons, using random-numbers for the coordinates of the starting vertices and the ending vertices • We use linear interpolation to calculate the sequence of the “in-between” vertices • We use Bresenham’s line-drawing method to “connect-the-dots” at each stage

  10. Stick man

  11. Drawing curves • Another application of “linear interpolation” • We can construct a so-called Bezier curve • The curve is determined by specifying a small number of “control points” • A recursive algorithm is then applied, to generate locations along a smooth curve • This idea is ‘deCasteljau’s algorithm’ • Kai Long has written an implementation

  12. Here’s the idea The same value of t is used for all of these interpolations P2 P3 P1 Only the red point actually is drawn Start with some “control points” (Here we use just four of them) Find their “weighted averages” P4

  13. Kai’s Implementation typedef struct { double h, v; } Point; typedef struct { int numcpts; Point cpts[ MAXVERT ]; } BezierCruve; // helper function void middle( Point p, Point q, Point &mid ) { mid.x = (p.x + q.x)/2; mid.y = (p.y + q.y)/2; }

  14. Labels used in recursion h1 a h2 c2 d c1 b2 b1 if ( very_near( p1, p2 ) // base case draw_line_segment( p1, p2 ); else { // recursion case recursive_bezier( p1, b1, c1, d ); recursive_bezier( d, c2, b2, p2 ); } p2 P1

  15. In-class exercise • Can you combine these two applications? • Create a bezier curve with 4 control-points • Create another one with 4 control-points • Construct some in-between Bezier curves by applying linear-interpolation to pairs of corresponding control-points • So first curve will “morph” into second one

More Related