1 / 29

Wireless Wakeups Revisited: Energy Management for VoIP over Wi-Fi Smartphones

Wireless Wakeups Revisited: Energy Management for VoIP over Wi-Fi Smartphones. Yuvraj Agarwal (University of California, San Diego) Ranveer Chandra, Victor Bahl, Alec Wolman (Microsoft Research), Kevin Chin ( Windows CE), Rajesh Gupta (UC San Diego). Motivation .

jadyn
Download Presentation

Wireless Wakeups Revisited: Energy Management for VoIP over Wi-Fi Smartphones

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wireless Wakeups Revisited: Energy Management for VoIP over Wi-Fi Smartphones Yuvraj Agarwal (University of California, San Diego) Ranveer Chandra, Victor Bahl, Alec Wolman (Microsoft Research), Kevin Chin (Windows CE), Rajesh Gupta (UC San Diego)

  2. Motivation • VoIP is increasingly popular (esp. in enterprises) • Low cost of deployment, manageability • Increased functionality over PSTN • VoIP over Wi-Fi adds support for mobility • VoIP over a Wi-Fi enabled Smartphone is compelling • Smartphone (PDA + Cell-phone) gaining popularity • Support multiple radio interfaces (Wi-Fi, BT, Cellular) • Single device for all communication needs (Cellular + VoIP)

  3. ATA PSTN Enterprise VoIP Deployments VoIP phone Wi-Fi Access Point Enterprise Network Internet LAN VoIP proxy Smartphone(Wi-Fi + Cellular) Wi-Fi Interface Cellular Interface

  4. Problem Statement • Wi-Fi has to be ON to receive incoming calls • Wi-Fi power consumption is high even when idle • Reduces battery lifetime • Cingular 2125 : GSM (6.25days), Wi-Fi (9Hrs) ! Turn Wi-Fi ON only when needed!

  5. Possible Approach: Wireless Wakeups • Wake-On-Wireless [MobiCom’02] • Multiple radio solution • High power Wi-Fi radio in OFF state • Wi-Fi turned on by signal on a custom low-power radio • Barriers to deployment: • Additional Infrastructure, additional radios • Short range radios : Dense deployment required

  6. Our Approach: Cell2Notify • Key insights : Cellular Interfaces (GSM/CDMA) • Ubiquitous connectivity • Usually always turned ON • Consumes less power than Wi-Fi when “idle” • How to signal an incoming VoIP call ? • Send a “ring” over the cellular interface • Encode “wake-up” call using a specific Caller-ID ! Analogy: “Turn your Wi-Fi ON as soon as I call you from this number. Turn Wi-Fi OFF after the call had ended”

  7. Smartphone Power Consumption • Cellular voice radio (GSM) highly optimized for low idle power • Cingular 2125: GSM radio consumes 38 times less power than Wi-Fi !

  8. Cell2Notify Protocol IP Phone Soft Phone Enterprise Network Complete call setup over Wi-Fi Disable Wi-Fi Enable Wi-Fi Access Point Smart Phone Internet LAN ATA SIP Proxy Match VoIP to GSM number Incoming VoIP call Call GSM number PSTN Register GSM number GSM Network Wi - Fi interface GSM interface Base Station ATA = Analog Telephony Adapter

  9. Handling Calling Scenarios • Clients may move in and out of WiFi/Cellular coverage • Within both Wi-Fi and cellular coverage (default) • Out of both Wi-Fi and cellular coverage (unreachable) • Out of Wi-Fi, in cellular coverage • In Wi-Fi, out of cellular coverage • Robustness: required to handle these scenarios

  10. Scenario: Within Cellular, out of Wi-Fi range SIP Proxy Smartphone Call on GSM Caller ID = UID Turn on Wi-Fi Wait for timeout Scan Forward call on GSM Caller ID = Normal

  11. Back in cellular coverage Turn off Wi-FiUse Cell2Notify SIP De-Register Scenario: In Wi-Fi, out of cellular coverage Smart Phone Out of Cellular coverage SIP Proxy Turn on Wi-Fi,Auth, Associate, Get IP address (Use 802.11 PSM) SIP Register Incoming Call Call on Wi-Fi

  12. Cell2Notify : Implementation • Design goals: • Easy and incrementally deployable • No additional hardware, infrastructure • Cell2Notify : • Modifications at the VoIP proxy • Modifications to the Smartphone clients

  13. Cell2Notify: Modifications at the VoIP Proxy • No changes to the VoIP protocol itself (SIP) • Add “call-handling rules” for each VoIP extension • Incrementally deployable • Configuration changes only • Allows a mix of participating and non-participating clients Send Ring Notification to Caller Set outbound Caller-ID Dial the GSM number of theSmartphone Wait for 2 seconds Dial SIP extension 8 times, witha 1s interval between re-tries Send invalid greeting to caller Disconnect call

  14. Cell2Notify : Modifications on the Clients • Only software modifications on Smartphone: • As a user-level service (daemon) on the client • No kernel modifications • Functionality: • Distinguish between wake-up and regular cellular call • Ability to power its Wi-Fi interface ON/OFF • Scan for APs. Authenticate and Associate with a particular AP • Bring up a VoIP softphone user interface • Detect end of VoIP call

  15. Signal over Bluetooth WinXP Laptop + Wi-Fi + SIP Client W810i Emulated Smartphone Cell2Notify : Prototype Client Device • Cell phones relatively closed platforms • Emulated a Smartphone  off-the-shelf (cellphone + laptop) • Utilize Bluetooth “Headset Profile” to pair them ! • Is our prototype realistic ? • Latency overhead in an integrated solution will be lower • Need to modify connection manager (Windows-CE)

  16. System Evaluation • Goal: estimate increase in battery lifetime for a Smartphone device • Methodology : • Measure power consumption of a Smartphone for various states • Instrument Smartphone to measure accurate power • Collect typical usage patterns • Gather call logs for enterprise users • Maintain call durations and call time

  17. Call logs : Usage Patterns Call Log : James James and John are real enterprise users Beth is a hypothetical user with a very heavy usage pattern (15min per hour)

  18. Power Consumption of a Smartphone Cingular 2125 • Used to estimate energy savings for the Smartphone • Using real usage patterns from 3 different enterprise users • Lifetime based on the integrated 1150mAH @ 3.7V Li-ion battery

  19. Battery Lifetime : Smartphone 540% 230% 70% • Substantial increase in battery lifetime depending on usage! • John: 230% improvement, James : 540% • Beth improves lifetime by 70% despite very heavy usage

  20. Latency Tradeoff • Wi-Fi interface switched OFF : added latency to receive a VoIP call • 10s of Latency 2 rings

  21. Reducing Latencies • Call on Cellular interface • Use ATA rather than external VoIP gateway (2.5s vs 3.6s) • Enable Wi-Fi interface • Windows XP takes 1.4s, better in Win-CE • Disable Zero-Conf, wrote specific utility to enable/disable card • Connect to Access Point (Scan, Authenticate, Associate) • Cache known/seen APs and try them first • Obtain IP address using DHCP • Cache DHCP lease parameters Expected Latency in a Smartphone implementation : 7s

  22. Alternative: VoIP over Cellular Data Network? • VoIP over cellular data network (1xEvDO,GPRS/EDGE) • Expensive: requires subscription to data plan • Poor performance: Cellular data networks not optimized for VoIP • Greater power consumption than Wi-Fi for VoIP traffic !

  23. Conclusions • Cell2Notify • Specific application : VoIP over Wi-Fi Smartphones • Significantly lower bar for deployment • Cellular : Leverage near ubiquitous coverage • No additional hardware infrastructure needed • Leverage the diversity of multiple radio interfaces • Extends battery lifetime significantly : 1.7 to 6.4 times • End-to-end latency increase : Maximum of 2 additional rings

  24. Cell2Notify: (August/2007 Update!) • We now have an implementation for a Windows Mobile Smartphone • Any Windows Mobile 6 based smartphone with WiFi can use Cell2Notify! • Demo at Mobisys 2007 • Poster and Demo at the UCSD/School of Engineering Research Expo • Cell2Notify won 1st Prize! • Video of Cell2Notify in action can be seen at: http://mesl.ucsd.edu/yuvraj/research/cell2notify.html

  25. Questions ? • Website : http://mesl.ucsd.edu/yuvraj

  26. Backup Slides !

  27. Discussion: Modifying the Caller-ID • Cell2Notify: Needs a unique-ID sent as Caller-ID • Distinguish between a regular and wake-up call • Using a static caller-IDs can be exploited • Attackers can also spoof caller-ID • Solution: Caller-ID changes every time • S/KEY system (shared keys), Caller-ID is a one way hash • Is modifying the Caller-ID legal ? • Done commonly by enterprise PBXs • No law in the US that prevents it for “legitimate use” • Commercial services employing spoofing [spooftel, spoofcard]

  28. Alternative to VoIP over Wi-Fi • VoIP over cellular data network (1xEvDO,GPRS/EDGE) • Expensive: requires subscription to data plan • Performance : Cellular data networks not optimized for VoIP • Greater power consumption than Wi-Fi for VoIP traffic !

  29. Questions ? Website : http://mesl.ucsd.edu/yuvraj QUESTIONS

More Related