1 / 18

Auto-Scrubber Maintenance

Auto-Scrubber Maintenance. Before you begin to work on your auto-scrubber. Unplug the charger from the wall,. Then. Unplug the batteries from the charger. As detailed in the JSA. Remove the cable and unhook the clamps to gain access to the batteries.

jaeger
Download Presentation

Auto-Scrubber Maintenance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Auto-Scrubber Maintenance

  2. Before you begin to work on your auto-scrubber

  3. Unplug the charger from the wall, Then...

  4. Unplug the batteries from the charger As detailed in the JSA

  5. Remove the cable and unhook the clamps to gain access to the batteries

  6. Remove the cable and unhook the clamps to gain access to the batteries Remove the cable and unhook the clamps to gain access to the batteries

  7. Remove the battery cell covers to check the water level…

  8. EVERY WEEK

  9. Remove and clean both the Drive-block and Pad … • Remove and clean both the Drive-block and Pad … …Every week

  10. …and make sure this is in place

  11. Locate the filter to see if it needs cleaning Oops! What’s missing from this picture? GLOVES

  12. Locate the filter to see if it needs cleaning

  13. This one needs to be replaced.

  14. Make sure you fasten the clamps when you reassemble the unit

  15. Check the Squeegee to make sure it is clean and ready to go

More Related