1 / 31

Chapter 10: Phase Transformations

Chapter 10: Phase Transformations. Fe 3 C. Fe. g. Eutectoid. (cementite). transformation. +. (Austenite). a. C. (BCC). FCC. (ferrite). ISSUES TO ADDRESS. • Transforming one phase into another takes time. Phase Transformation. Nucleation and Growth. 100.

jael-benson
Download Presentation

Chapter 10: Phase Transformations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 10:Phase Transformations Fe3C Fe g Eutectoid (cementite) transformation + (Austenite) a C (BCC) FCC (ferrite) ISSUES TO ADDRESS... • Transforming one phase into another takes time.

  2. Phase Transformation

  3. Nucleation and Growth 100 Nucleation rate increases with T % Pearlite Growth Growth rate increases with T regime 50 Nucleation regime t log(time) 0.5 0 pearlite colony g g g T just below TE T moderately below TE T way below TE Nucleation rate low . Nucleation rate med Nucleation rate high Growth rate high Growth rate med. Growth rate low • Reaction rate is a result of nucleation and growth of crystals. • Examples: Eutectoid reaction

  4. Nucleation nuclei (seeds) act as template to grow crystals Nucleation driving force increases as increase T • Supercooling (or undercooling) • superheating Small supercooling  few nuclei, large crystals Large supercooling  rapid nucleation, many nuclei, small crystals

  5. Fe-Fe3C phase diagram

  6. Solidification: Nucleation Processes • Homogeneous nucleation • nuclei form in the bulk of liquid metal • requires supercooling (typically 80-300°C max) • Heterogeneous nucleation • much easier since stable “nucleus” is already present • Could be wall of mold or impurities in the liquid phase • allows solidification with only 0.1-10ºC supercooling

  7. Surface Free Energy-destabilizes the nuclei (energy for makinmg surface) ,g = surface tension HS = latent heat of solidification DGT = Total Free Energy = DGS + DGV Volume (Bulk) Free Energy – stabilizes the nuclei (releases energy) Homogeneous Nucleation & Energy Effects r* = critical nucleus: nuclei < r* shrink; nuclei>r* grow

  8. Homogenous and Heterogeneous Nucleation

  9. Completely growth maximum rate reached – now amount unconverted decreases so rate slower rate increases as surface area increases & nuclei grow By convention r = 1 / t0.5 Rate of Phase Transformation Fixed T: Isothermal Fraction transformed, y log t

  10. Isothermal Transformation Diagrams 100 T(°C) 600°C Austenite (stable) (DT larger) TE(727C) 650°C 50 y (% pearlite) 700 Austenite 675°C (unstable) (DT smaller) Pearlite 600 0 isothermal transformation at 675°C 500 100% 50% 0%pearlite 400 time (s) 2 3 4 5 1 10 10 10 10 10 • Fe-C system, Co = 0.76 wt% C • Transformation at T = 675°C. 100 T = 675°C y, % transformed 50 0 2 4 time (s) 1 10 10 Course pearlite  formed at higher T - softer Fine pearlite  formed at lower T - harder

  11. 135C 119C 113C 102C 88C 43C 1 10 102 104 Rate of Phase Transformations % Recrystallization of Rolled Copper Percent recrystallization is function of time and temperature

  12. g Þ a + Fe3C 0.76 wt% C 6.7 wt% C 0.022 wt% C T(°C) 1600 d L 1400 g +L g 1200 L+Fe3C 1148°C (austenite) 1000 g +Fe3C a Eutectoid: Fe3C (cementite) ferrite Equil. Cooling: Ttransf. = 727ºC 800 727°C DT a +Fe3C 600 Undercooling by DTtransf. < 727C 0.022 0.76 400 0 1 2 3 4 5 6 6.7 Co, wt%C (Fe) Transformations & Undercooling • Eutectoid transformation (Fe-C System): • Can make it occur at: ...727ºC (cool it slowly) ...below 727ºC (“undercool” it!)

  13. cementite (Fe3C) Ferrite (a) a a g g a a pearlite a growth a direction Eutectoid Transformation Rate • Growth of pearlite from austenite: Diffusive flow of C needed a g g a a • Higher T give higher diffusivity

  14. Effect of Cooling History in Fe-C System 2 3 4 5 1 10 10 10 10 10 T(°C) Austenite (stable) TE (727C) 700 Austenite (unstable) Pearlite 600 g g g g g g 100% 500 50% 0%pearlite 400 time (s) • Eutectoid composition, Co = 0.76 wt% C • Begin at T > 727°C • Rapidly cool to 625°C and hold isothermally.

  15. CO = 1.13 wt% C T(°C) T(°C) 900 1600 d A L 1400 800 TE (727°C) A g +L + g 1200 L+Fe3C A C (austenite) 700 P 1000 + Fe3C (cementite) g +Fe3C a P A 600 800 DT a +Fe3C 500 600 0.022 0.76 1 10 102 103 104 1.13 400 727°C time (s) 0 1 2 3 4 5 6 6.7 (Fe) Co, wt%C Transformations with Proeutectoid Materials Hypereutectoid composition – proeutectoid cementite

  16. T-T-T of Eutectoid Composition A – Austenite P – Pearlite B – Bainite M – Martensite C – Cementite

  17. 800 Austenite (stable) TE T(°C) A P 600 100% pearlite pearlite/bainite boundary 100% bainite B 400 A 200 0% 100% 50% 10 -1 3 5 10 10 10 time (s) Non-Equilibrium Transformation Products: Fe-C • Bainite: --a lathes (strips) with long rods of Fe3C --diffusion controlled. • Isothermal Transf. Diagram Fe3C (cementite) a (ferrite) 5 mm T-T-T Diagram Time – Temperature – Transformation

  18. Spheroidite: Fe-C System a (ferrite) Fe3C (cementite) 60 m • Spheroidite: -- a grains with spherical Fe3C -- diffusion dependent. -- heat bainite or pearlite for long times near TE

  19. Martensite: Fe-C System Fe atom potential x sites 60 m C atom sites x x x x x Martensite needles 800 Austenite (stable) Austenite TE T(°C) A P 600 B 400 A 100% 50% 0% 0% 200 M + A 50% M + A 90% M + A time (s) -1 10 3 5 10 10 10 • Martensite: --g(FCC) to Martensite (BCT) • Isothermal Transf. Diagram • g to M transformation -- is rapid! -- % transformation depends on T only.

  20. quench tempering M (BCT) Martensite Formation  (FCC) P  (BCC) + Fe3C slow cooling • M = martensite is body centered tetragonal (BCT) • Diffusionless transformation BCT if C > 0.15 wt% • BCT  few slip planes  hard, brittle

  21. Phase Transformations of Alloys Effect of adding other elements Change transition temp. Cr, Ni, Mo, Si, Mn retard    + Fe3C transformation Alloy steel (type 4340)

  22. Continuous Cooling Curve

  23. Dynamic Phase Transformations On the isothermal transformation diagram for 0.45 wt% C Fe-C alloy, sketch and label the time-temperature paths to produce the following microstructures: • 42% proeutectoid ferrite and 58% coarse pearlite • 50% fine pearlite and 50% bainite • 100% martensite

  24. 800 A + a A A + P P 600 B A + B A 50% 400 M (start) M (50%) M (90%) 200 0 0.1 10 103 105 time (s) Example Problem for Co = 0.45 wt% • 42% proeutectoid ferrite and 58% coarse pearlite first make ferrite then pearlite course pearlite  higher T T (°C)

  25. 800 A + a A A + P P 600 B A + B A 50% 400 M (start) M (50%) M (90%) 200 0 0.1 10 103 105 time (s) Example Problem for Co = 0.45 wt% • 50% fine pearlite and 50% bainite first make pearlite then bainite fine pearlite  lower T T (°C)

  26. 800 A + a A A + P P 600 B A + B A 50% 400 M (start) M (50%) M (90%) 200 c) 0 0.1 10 103 105 time (s) Example Problem for Co = 0.45 wt% • 100 % martensite – quench = rapid cool T (°C)

  27. Pearlite (med) Pearlite (med) C ementite (hard) ferrite (soft) Co< 0.76 wt% C Co > 0.76 wt% C Hypoeutectoid Hypereutectoid Hypo Hyper Hypo Hyper TS(MPa) %EL 80 1100 YS(MPa) 100 900 hardness 40 700 Impact energy (Izod, ft-lb) 50 500 0 300 0 1 0.5 0 1 0.5 0 0.76 wt% C 0.76 wt% C Mechanical Prop: Fe-C System (1) • Effect of wt% C • More wt% C: TS and YS increase , %EL decreases.

  28. Hypo Hyper Hypo Hyper 90 320 fine spheroidite 60 pearlite 240 coarse Ductility (%RA) pearlite spheroidite Brinell hardness coarse 160 30 pearlite fine pearlite 80 0 1 1 0.5 0 0.5 0 wt%C wt%C Mechanical Prop: Fe-C System (2) • Fine vs coarse pearlite vs spheroidite fine > coarse > spheroidite • Hardness: fine < coarse < spheroidite • %RA:

  29. Hypo Hyper 600 martensite Brinell hardness 400 200 fine pearlite 0 1 0.5 0 wt% C Mechanical Prop: Fe-C System (3) • Fine Pearlite vs Martensite: • Hardness: Fine Pearlite << Martensite. • Hardness: Pearlite < Bainite.

  30. TS(MPa) YS(MPa) 1800 TS 1600 YS 1400 1200 60 50 1000 %RA %RA 40 800 30 200 400 600 Tempering T(°C) produces extremely small Fe3C particles surrounded by a. Tempering Martensite • reduces brittleness of martensite, • reduces internal stress caused by quenching. 9 mm • • decreases TS, YS but increases %RA

  31. Austenite (g) moderate rapid slow cool quench cool Pearlite Bainite Martensite (a + Fe3C plates/needles) (a + Fe3C layers + a (BCT phase diffusionless proeutectoid phase) transformation) reheat Martensite T Martensite Tempered bainite Strength Ductility Martensite fine pearlite (a + very fine coarse pearlite Fe3C particles) spheroidite General Trends Summary: Processing Options

More Related