1 / 35

Textile Structures for Composites

Textile Structures for Composites. Objectives. After studying this chapter, you should be able to: Describe major textile preform structures used in composites including their advantages and disadvantages, and how they are made.

jake
Download Presentation

Textile Structures for Composites

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Textile Structures for Composites

  2. Objectives • After studying this chapter, you should be able to: • Describe major textile preform structures used in composites including their advantages and disadvantages, and how they are made. • Calculate theoretical volume fractions for selected types of preforms. • Select right type of preform for a particular end use. • Explain qualitatively the effect of fiber orientation and fiber volume fraction on composite mechanical properties.

  3. Textile Structures for Composites • Reading assignment: • Text book, Chapter 3; • Dow, N.F. and Tranfield, G., Preliminary investigation of feasibility of weaving triaxial fabrics (Doweave), Textile Research Journal, 40, 986-998 (November, 1970). • Mohamed, M., Three dimensional textiles, American Scientist, 78, 530-541(November-December, 1990). • Popper, P., Braiding, International Encyclopedia of Composites, Vol. 1, Edited by Lee, S.M., VCH Publishers, New York, 130-147 (1990). • Jones, F.R., Handbook of Polymer-Fiber Composites, Section 1.12. Knitted reinforcements • How Nonwovens Are Made

  4. Textile Structures for Composites • Unidirectional • Laminae (ply) • Laminates: a stack of laminae

  5. Textile Structures for Composites • Two dimensional (Laminates) • Nonwoven: • short fibers and continuous fibers, plates, • particulates • Woven • Biaxial • Triaxial • Knitted • Braided

  6. Textile Structures for Composites • Three dimensional • Nonwoven • Woven • Orthogonal • Multi-directional • Knitted • Braided • Combination

  7. Structure property relations of composites

  8. Textile Structures for Composites • Unidirectional and 2-D preforms • Laminates • From lamina to laminate • Lamina: unidirectional, woven, knitted, braided or nonwoven • Laminate • Factors effecting laminate properties • Fiber and matrix properties • Interface properties • Fiber volume fraction • Fiber/lamina Orientation • Fiber length

  9. Orientation of short fiber composites • Fiber orientation determines the mechanical properties • Important for non-woven and sheet molding compound • Orientation characterized by normalized histograms (in plane) • Image analysis of a photograph • Directions divided into number of “bins” • The radius of each bin proportional to fraction of fibers oriented in that direction

  10. Nonwoven preforms • Nonwoven web-forming processes: • Wet laying • Dry laying • Other Methods • Nonwoven bonding methods: • Latex bonding (2D) • Saturation bonding • Gravure printing • Screen printing • Spray bonding • Foam bonding

  11. Nonwoven preforms • Nonwoven bonding methods • Mechanical bonding (3D) • Needle punching • Spunlacing (water jets) • Stitch bonding • Knitting through • Thermal bonding (2D) • Through-air bonding • Calender bonding

  12. Three dimensional textiles • 3D woven fabrics • Structure • Weaving processes • Performance • Shear strength: 300% • Interlaminar tensile strength: 200% • Flexure strength: 65% higher • Failure mode: micro-buckling of fibers

  13. Three dimensional textiles • Knitted and braided forms • Weft knitting • Warp knitting • with weft insertion • multiaxial warp knitting • 3D braiding

  14. Braiding • Braiding process and terminology • Braiding yarns • Axial yarns • Core yarns • Mandrel • Carrier • Horn gears • Convergence zone • Braiding angle θ • Pick • Width or diameter

  15. Braiding • Machines • Circular 144 carriers, <400 ppm • Grouped carrier <1200 ppm • Jacquard: enables connected sets of yarns to braid different patterns • Special pattern • Solid rope: all carriers move around a horn gear in one direction • Packing braider <230 ppm, solid square cross-section • 3D: >2000 carriers circular >12000 carriers rectangular

  16. 3D-Braiding • 4-Step Braiding • Original • Step 1 • Step 2 • Step 3 • Step 4

  17. Braiding • Unique features: • Fabric can be formed over a complex shaped mandrel • Yarns feed on demand • Yarn and elements insertion possible • Possible to change the sequence of interlacing • Improved fracture toughness • Decreased sensitivity to holes

  18. Braiding • Limitations • Move entire supply of braiding yarns • Machine >> product • Moderate aspect ratio only • Fiber orientation angle varies arbitrarily

  19. Comparison of textile structures for composites • Fiber orientation • Structural integrity • interlaminar connection • broken ends, • resin pocket, • formation of holes, inclusion of elements etc.

  20. Comparison of textile structures for composites • Fiber volume fraction • Productivity • formation of the fabric, • easiness to handle, • formation of composites

  21. Comparison among 1-D, 2-D and 3-D • 1D: Unidirectional laminates • Advantages: • Highest productivity for preforms • Highest strength and modulus in fiber oriented direction • Highest fiber volume fraction. • Disadvantages: • Poor strength and modulus in off-axis directions • Poor compression properties • Delamination possible

  22. Comparison among 1-D, 2-D and 3-D • 2D: Woven fabrics, Nonwovens, laminates with differently oriented laminas • Advantages: • High productivity. • Better properties (tensile strength and modulus) in both X and Y directions or even diagonally. • Disadvantages: • Poor interlaminar properties and properties in thickness directions (tensile, shear). • Delamination possible. • Lower fiber volume fraction than 1D.

  23. Comparison among 1-D, 2-D and 3-D • 3-D: (Woven, Nonwoven) • Advantages: • High strength and modulus in all three directions • No delamination • Good structural integrity (not many broken fiber ends) • Disadvantages: • Low productivity • Low fiber volume fraction

  24. Comparison: Woven versus nonwoven

  25. Comparison of Woven Fabrics

  26. Fiber volume fraction calculation • Unidirectional composites • use the equations described earlier in the chapter for theoretical calculation • use photomicrographic method • 3D composites

  27. Fiber volume fraction calculation • 2D composites

  28. Three D woven composite

  29. “ PERFECT” 3D ORTHOGONAL WEAVE Top view Side view

  30. Multilayer fabrics Warp interlock 3D orthogonal z Warp (x) Angle interlock Filling (y)

  31. 2d woven fabrics 二维正交 二维三向

  32. 3D - shaped weft-knitted fabrics for preforms Altering the number of operating needles from course to course HELMET FORM Knitted fabric (Aramid fiber) 3D Theoretical form 2D pattern

  33. 2d braiding

  34. 3d braiding

More Related