1 / 8

Introduction to Engineering Multi-view Drawings - 1

Learn about multi-view projections, sketching techniques, and assignments to master creating detailed and accurate 2D drawings in engineering.

jalvarado
Download Presentation

Introduction to Engineering Multi-view Drawings - 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introduction to EngineeringMulti-view Drawings - 1 Agenda Multi-view Projections Multi-view Sketch Reference Material: ICGE Section 2.4.4

  2. Multi-view Drawing is a collection of flat 2-D drawings that work together to give a complete and accurate description of an object.

  3. Defining the Six Principal Views

  4. Which Views to Present? General Guidelines • Pick a Front View that is most descriptive of object • Most common combination of views is to use: Front, Right Side, and Top

  5. In-Class Exercise • Sketch the top, front, & right side views of the object below. Pay attention to the location of the views.

  6. Solution

  7. Assignment • Complete assignments 3 & 4 for tomorrow • On half isometric/half rectilinear grid paper provided, draw both the isometric and the top, front, and right side views of each object. • Assignment 3: Bertoline, Problem 2.9 • Pg. 56 #(6) • Pg. 58 #(27) • Assignment 4: Bertoline, Problem 2.9 • Pg. 57 #(22) • Pg. 58 #(31)

More Related