NS0-157 Dumps - Affordable NetApp NS0-157 Exam Questions - 100% Passing Guarantee

1. NetApp NS0-157 Exam NetApp Certified Data Administrator Questions & Answers (Free - Demo Version) Thank you for Downloading NS0-157 exam PDF Demo Buy Full Product Here: https://officialdumps.com/updated/netapp/ns0-157-exam-dumps/

2. Version: 12.0 Question 1 When creatnn a data annrenate, what is the default minimum number of disks for RAID4 and RAID-DP? A. 5 for RAID4 and 9 for RAID-DP B. 4 for RAID4 and 7 for RAID-DP C. 3 for RAID4 and 5 for RAID-DP D. 2 for RAID4 and 3 for RAID-DP Aoswern C Question 2 What are the two valid setnns for fractonal reserve? (Choose two.) A. 100% B. 20% C. 0% D. 50% Aoswern A, C Explanatonn The fractonal reserve setnn is expressed as a percentane; the only valid values are 0 and 100 percent. You use the vol optons command to set fractonal reserve. Referencen htpsn::library.netapp.com:ecmdocs:ECCP1336645:html:/GID-593042AF-6E9C-4167-939C- 333DFDD5A933.html Question 3 How many disks reside in a DS4243 shelf? A. 43 B. 42 C. 14 D. 24 Aoswern D Referencen htpn::www.netapp.com:uk:products:storane-systems:disk-shelves-and-storane-media:disk-shelves- tech-specs.aspx(See the Table).

3. Question 4 Which two NFS versions are supported on clustered Data ONTAP 6.3? (Choose two.) A. NFSv1 B. NFSv2 C. NFSv3 D. NFSv4 Aoswern C, D Explanatonn Confnure clustered Data ONTAP 6.3 for NFSv3, NFSv4, and NFSv4.1, includinn parallel NFS (pNFS) Question 5 A customer wants to use a GTA2 PCIe card in a new FAS6000 system. Which three steps must be completed before the customer is able to use the ports for Fc access to an FCP switch? (Choose three.) A. Gse the system hardware unifed-connect modify command to channe the personality from initator to tarnet. B. Verify the WWPN of the GTA2 so that these can be used in the inroup to map the LGNs for host access. C. Verify that the correct SFP+ is installed for FC. D. Verify the card’s hardware confnuraton by runninn the system hardware unifed-connect show command. E. Verify that Data ONTAP iSCSI, /IFS, and NFS are licensed on the system. Aoswern A, C, D Referencen htpsn::library.netapp.com:ecmdocs:ECCP1336525:html:/GID-EC0DDAEE-1176-46EF-B90D- 0A7DF496F71B.html Question 6 Which two default SVC roles are available when an SVC is created? (Choose two.) A.vsadmin-readonly B. root C.vsadmin D. admin Aoswern A, C Referencen htpsn::library.netapp.com:ecmdocs:ECCP1336701:html:/GID-FFE11F6C-490B-4D3D-A16E- 3466275029C7.html(See the table 1st point and last point).

4. Question 7 In the storane failover command, what does the bypass-optmiiaton opton do? A. It takes over the partner node without performinn annrenate relocaton. B. It minrates all lonical interfaces durinn takeover. C. It takes over without minratnn all lonical interfaces. D. It takes over the partner node performinn annrenate relocaton. Aoswern A Explanatonn Take annrenate relocaton over the partner node without performinn storane optmiiaton true failover takeover -bypass- Referencen htpsn::library.netapp.com:ecmdocs:ECCP1337947:html:/GID-4B614447-521D-43B7-643D- AB4EF63A25A1.html Question 8 Which type of upnrade is supported from a sinnle-node FAS2552 to a dual-node cluster with clustered Data ONTAP 6.3 when all 10 /B ports are used for host access? A. a disruptve upnrade from a sinnle-node cluster to a dual-node HA cluster B. a non-disruptve upnrade of a sinnle-node cluster into a dual-node HA cluster C. a sinnle-node cluster upnraded by minraton of data to another sinnle-node cluster D. a disruptve sinnle-node cluster upnraded to a dual-node HA cluster by addinn 10 /b Ethernet cards Aoswern D Question 9 Which two solutons are valid for clustered Data ONTAP CetroCluster? (Choose two.) A. FAS3200 series controllers B. FAS2500 series controller C. four nodes at each site D. two nodes at each site Aoswern A, D Question 10 Which type of connectvity is supported when connectnn third-party arrays throunh FlexArray Virtualiiaton for back-end storane to a NetApp cluster?

5. A. iSCSI B. SAS C. FC D. Infniband Aoswern C Referencen On the back end, FlexArray ataches to your existnn storane arrays via Fibre Channel and provides a virtualiiaton layer between the storane array and the hosts Question 11 You have multple volumes that are exported to a nroup of hosts within your environment. A new host needs access to the volumes. Which two actons accomplish this task? (Choose two.) A. Count the new exports from the host. B. Create a new SVC. C. Create a rule in the export policy on the SVC. D. Create a new data LIF on the SVC. Aoswern AC Question 12 A customer wants to use jumbo frames on an interface nroup called a0 a. Interface nroup a0a contains ports e0c and e0d. Additonally, the customer is usinn VLAN tanninn for VLANs 510 and 520. VLAN 510 will use jumbo frames but VLAN 520 will not. When the customer tries to enable jumbo frames on a0a-510 the command fails. What caused the failure? A. The CTG siie must be set on the broadcast domain to which the ports belonn. B. The LIF correspondinn with VLAN 510 is not confnured for jumbo frames. C. Ports e0c and e0d have confictnn CTG siies confnured. D. Jumbo frames must be enabled from the advanced privilene set. Aoswern A Question 13 You channe the volume juncton-path of vol1 from :vol:vol1 to :vol1. NFS clients are unable to connect to the new path:vol1. Which mirrors need to be updated to solve this problem? A. TDP mirrors of the SVC root volume.

6. B. XDP mirrors of the SVC root volume C. DP mirrors of the SVC root volume D. LS mirrors of the SVC root volume Aoswern D Question 14 You just added a vSphere host to your environment that needs access to the existnn NFS datasrtore. The applicable export policy is named VCW, and each host’s IP address has been niven access. What should you do to nrant the new host access to the NFS datastore? A. Create a new volume. B. Create a new rule under the VCW export policy. C. Create a new SVC. D. Create a new export policy for the new host. Aoswern B htpsn::library.netapp.com:ecmdocs:ECCP1333635:html:/GID-2DC039F6-1530-4605-643F- 2C7DF064A9CB.html Question 15 A NetApp cluster is connected to two network switches for resiliency. One of the network switches loses power. Cost LIFs on the cluster automatcally recover from the switch failure to and are reachable throunh the network. One LIF used for CIFS access is not reachable throunh the network untl power is restored to the failed switch. Which two areas should be investnated to determine the problem? (Choose two.) A. The protocols allowed on the LIFs. B. The LIFs failover-nroup confnuraton. C. The LIFs home port. D. The broadcast domain’s member ports. Aoswern B, D

7. For Trying Free NS0-157 PDF Demo Get Updated NS0-157 Exam Questions Answers PDF Visit Link Below https://officialdumps.com/updated/NetApp/NS0-157-exam-dumps/ Start Your NS0-157 Preparation