HP Office Jet 5260 Printer Settings

1. HP Office Jet 5260 Wireless Printer Settings HP Office jet 5260 printer is a wireless All-in-One device. This printer uses the ‘drop-on-demand thermal inkjet’ technology to give out amazing prints at a good speed. The step-by-step instructions to set up the HP Office jet 5260 r are provided on this web page. Step 1 – Unpacking the HP’s Officejet 5260 printer Take the HP Officejet 5260 out of the box. Clear all the tapes as well as the packing materials from the outside and inside of the printer. Step 2 – Connecting the power cord Connect the power between the HP Office jet 5260 and a wall outlet. Power up the printer and check if the Power LED stays lit. This indicates that the HP Office jet 5260 printer is turned on. Step 3 – Initial settings On the printer’s control panel, set your desired language and select the Yes option. Specify the correct date and time and then select yes. Proceed with the LCD panel instructions to install the ink cartridges. Step 4 – Ink cartridges installation Lift-open the HP’s Officejet 5260 printer’s top cover. The carriage inside the printer starts to move to its left side. Wait until the carriage stays idle. Take a new ink cartridge from the package. Use the pull tab to remove the plastic tape from the new ink cartridge. Place the new ink cartridge into the correct slot and push it until it clicks into place. Do the same to insert the other ink cartridges. Once done, select the OK option on the HP Office jet 5260 printer control panel. Make sure to close the printer’s top cover properly. If you have any difficulties to do this process, click the below read more button to reach us. Read More