HP Office Jet pro 8035 Printer Setup

1. HP Office Jet Pro 8035 Printer Setup HP OfficeJet Pro 8035 is an All-in-One printer suitable for small office works. The printer has an auto- document feeder which intakes 35 pages at a time. It is also capable of auto-duplexing. Proceed with the steps that are given below to HP OfficeJet Pro 8035 printer setup. Take out the printer from the carton and verify the contents. Remove all the packing materials that include the tapes and protective films. Open the top cover and remove the protective film on the scanner glass. Then, close the lid. Connect the power cord to the HP printer’s rear side. Plug the cord’s other end into an electrical outlet for HP OfficeJet Pro 8035 printer setup. Choose your language and region using the touchscreen controls. Then, tap Confirm. Now, install the ink cartridges into the printer. Open the front door and cartridge access door. Wait until the carriage moves to the center. Take out the protective cover around the carriage. Unwrap the ink cartridges and pull the orange tags on them to remove the packing materials. Also, remove the cap on the ink cartridges by twisting it counter-clockwise. By following the color codes on the slots, install all the ink cartridges. Tap OK after installing all the ink cartridges. Pull the input tray out of the printer. Fan a stack of paper and align them on a flat surface. Then, load the stack into the paper tray. Slide the paper guides towards the corners of the paper. Insert the tray into the HP printer. If you want to set up fax, configure it by following the on-screen instructions. You can now install the printer software on your computer. Download the printer software from the official HP website. Choose a connection type and complete the installation by following the steps on the screen and also completed the HP OfficeJet Pro 8035 printer setup. If you want tech assistant for this process click the below link we will assist you. Read More