The HP Envy Photo 7855 Printer Installation Setup

1. HP Envy Photo 7855 Installation Settings HP Envy Photo 7855 is an All-in-One printer that prints using the HP Thermal Inkjet technology. One of the special features of this printer is automatic duplex printing. To know the HP envy photo 7855 installation settings and initial hardware setup, refer to the quick steps given below. Unpack The Printer: Check for the essential accessories in the box. Once you take the HP Envy Photo 7855 printer out of the box, remove all the tapes, stickers, and other packing materials from the inside and outside of the printer. You can recycle the packing materials. Power cord connection: Take a power cord and connect it between the HP Envy Photo 7855 printer and a wall outlet. Power up the printer, set a language, country/region, and select the Yes option to move on to the HP envy photo 7855 installation settings. Installing the ink cartridges: Lift-open the cartridge access door. Wait until the carriage moves to the center and stays idle. Take a new ink cartridge from the package and remove the plastic tape from it. Place the unpacked ink cartridge in the slot correct. Similarly, insert the remaining ink cartridges into the HP Envy Photo 7855 printer. Close the printer’s ink cartridge access door properly. If you have any difficulties to install the HP envy photo 7855 printer, click the below link we will assist you. Read more