1 / 189

Tool Identification

Tool Identification. By: Johnny M. Jessup Agriculture Instructor/FFA Advisor. Adjustable Wrench. Turning various size nuts and bolts. Allen Wrench. Turning hex head socket screws. Aviation Snips. Cutting sheet metal. Ball Pein Hammer. Hammering metal. Bar Clamp.

jana
Download Presentation

Tool Identification

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tool Identification By: Johnny M. Jessup Agriculture Instructor/FFA Advisor

  2. Adjustable Wrench • Turning various size nuts and bolts.

  3. Allen Wrench • Turning hex head socket screws.

  4. Aviation Snips • Cutting sheet metal.

  5. Ball Pein Hammer • Hammering metal.

  6. Bar Clamp • Clamping large sections of wood together.

  7. Bent Nose Pliers • Reaching obstructive or awkward places.

  8. Bolt Cutters • Cutting bolts & steel rods.

  9. Bolt Die • Cutting threads on bolts and rods.

  10. Bolt Die Stock • Holder for bolt tie.

  11. Bolt Tap • Cutting inside threads.

  12. Box End Wrench • Turning hex head nuts and bolts.

  13. Brick Jointer • Smoothing and designing masonry joints.

  14. Brick Trowel • Placing and spreading mortar.

  15. Bulb Planter • Planting and transplanting bulbs.

  16. Bush Axe • Cutting bushes and under growth.

  17. Butt Hinge • Hinge for narrow fencing.

  18. C Clamp • Clamping two or more pieces of metal together.

  19. Carriage Bolt • Bolting wood to wood or wood to metal.

  20. Castrator • Tool for sterilizing male animals.

  21. Center Punch • Starting holes in metal.

  22. Chain Saw File • Sharpening chain saw file.

  23. Chalk Line Reel • Making straight lines.

  24. Chipping Hammer • Removing slag from welds.

  25. Circuit Breaker • Protection from overload in electrical circuits.

  26. Circular Carbide Saw Blade • Blade used on portable electric saw.

  27. Cold Chisel • Cutting metal.

  28. Combination Oil Stone • For sharpening and honing cutting tools.

  29. Combination Square • Determining 45o and 90o angles.

  30. Combination Wrench • Turning hex and square nuts and bolts.

  31. Common Nail • Nailing boards together where holding power is desired.

  32. Compass • Drawing circles.

  33. Compass Saw • Cutting wood in close places.

  34. Concrete Finishing Trowel • Smoothing concrete.

  35. Concrete Float • Leveling concrete.

  36. Coping Saw • Cutting curves and irregular cuts.

  37. Cordless Drill • Drilling holes with a tool that uses a battery pack.

  38. Countersink • Flaring top of hole for recessing head for flathead screw or bolt.

  39. Cutting Torch • Cutting metal with heat.

  40. Deep Socket • Turning nuts and bolts in depressed areas.

  41. Dehorner • Removing horns from cattle.

  42. Diagonal Cutting Pliers • Surface and diagonal wire cutting.

  43. Drift Punch • Aligning holes.

  44. Drill Press Vise • Holding stock while drilling.

  45. Duplex Receptacle • To plug electrical units.

  46. Dust Mask • Protects the respiratory system from airborne particles.

  47. Ear Tagger • Labels individual animals for identification.

  48. Electrical Multimeter • Performs various tests on electrical circuits.

  49. Emery Dresser • Smoothing face of grinding wheel.

  50. End Cutting Nippers • Cutting ends of wire, nails and small bolts.

More Related