1 / 17

Effects of Degradation on Solar Photovoltaic Systems

Effects of Degradation on Solar Photovoltaic Systems. Katherine A. Kim, Pradeep S. Shenoy , and Philip T. Krein ECE Department University of Illinois at Urbana-Champaign Power Affiliates Program Meeting May 4, 2012. Motivation. “Go Green” Reduce carbon emissions

janae
Download Presentation

Effects of Degradation on Solar Photovoltaic Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Effects of Degradation on Solar Photovoltaic Systems Katherine A. Kim, Pradeep S. Shenoy, and Philip T. Krein ECE Department University of Illinois at Urbana-Champaign Power Affiliates Program Meeting May 4, 2012

  2. Motivation • “Go Green” • Reduce carbon emissions • Utilize renewable energy • Lower electricity cost • Tax Benefits

  3. Solar PV Considerations Customer Perspective Engineering Perspective Efficiency Reliability Fault-tolerance • Installation Costs • Equipment • Labor • Warranty (25 years) • Maintenance • Upkeep • Part replacement • Payback time Maximize System W/$

  4. If PV was a Superhero… Weakness = Mismatch Enemies Dust accumulation Partial shading Degradation [http://www.applied-solar.info]

  5. PV Mismatch

  6. PV Mismatch Each Panel Series String (with bypass diode)

  7. PV Cell Binning WdeHiPerforma™ 245 W - 240 W VdSuperPoly 285 W - 290 W Vd 275 W - 280 W [Images: http://am.suntech-power.com/]

  8. PV Cell Binning VdSuperPoly Vd • Laborious • Adds Cost Huge effort to reduce mismatch WdeHiPerforma™

  9. PV Degradation Model • Mean, μ • decreases over time • 1 to 0.5% per year (Si) • Standard Deviation, σ • increases over time • More studies required [3] Vazquez and Stolle [http://www.poweredbysearch.com/canadian-seo]

  10. Variation Effects on String Power

  11. Variation Effects on String Power

  12. Overcoming Mismatch Cascaded Architecture Differential Architecture

  13. Overcoming Mismatch Cascaded Architecture Differential Architecture Panel level control Converters Process fraction of power Rated less than panel Lower Cost • Panel level control • Converters • Process 100% power • Rated for panel • Higher Cost Increased power at Lower cost Increased W/$

  14. Summary • PV System Design Goal: Maximize watt per dollar (W/$) • PV mismatch greatly reduces output power • Cell binning reduces mismatch within panel • Degradation over time • Mean power decreases • Standard deviation increases • Differential Power processing • Overcome string variation losses • Higher efficiency, lower cost than cascaded

  15. Selected References • J. Poortmans, et al., “Linking nanotechnology to gigawatts: Creating building blocks for smart PV modules,” Progress in Photovoltaics: Research and Appl., vol. 19, no. 7, pp. 772–780, 2011. • S. Poshtkouhi. A. Biswas, and O. Trescases, "DC-DC converter for high granularity, sub-string MPPT in photovoltaic applications using a virtual-parallel connection," in Proc.IEEE Applied Power Electron. Conf. Expo., pp.86-92, Feb. 2012. • M. Vazquez and I. Rey-Stolle, “Photovoltaic module reliability model based on field degradation studies,” Progress in Photovoltaics: Research and Appl., vol. 16, no. 5, pp. 419–433, 2008. • D. C. Jordan and S. R. Kurtz. “Photovoltaic degradation rates—an analytical review,” Progress in Photovoltaics: Research and Appl., Oct. 2011. • A.M. Reis, et al., "Comparison of PV module performance before and after 11-years of field exposure," in Proc. of Photovoltaic Specialists Conf., pp. 1432- 1435, May 2002. • P. Sanchez-Friera, et al., “Analysis of degradation mechanisms of crystalline silicon PV modules after 12 years of operation in Southern Europe,” Progress in Photovoltaics: Research and Appl., vol. 19, no. 6, pp. 658–666, 2011. • G. R. Walker and P. C. Sernia, “Cascaded DC-DC converter connection of photovoltaic modules,” IEEE Trans. Power Electron., vol. 19, no. 4, pp. 1130-1139, July 2004. • P. S. Shenoy, B. Johnson, P. T. Krein, "Differential power processing architecture for increased energy production and reliability of photovoltaic systems," in Proc.IEEE Applied Power Electron. Conf. Expo., pp.1987-1994, Feb. 2012.

  16. Acknowledgments • Advanced Research Projects Agency-Energy (ARPA-E) The information, data, or work presented herein was funded in part by the Advanced Research Projects Agency-Energy (ARPA-E), U.S. Department of Energy, under Award Number DE-AR0000217. The information, data, or work presented herein was funded in part by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. • Grainger Center for Electric Machinery and Electromechanics (CEME) • National Science Foundation (NSF) through the Graduate Research Fellowship Program • Colleagues in the Power and Energy Systems Group

  17. Questions? Photo by Helen Hwang

More Related