1 / 11

Analog – ISDN Converter

Analog – ISDN Converter. Connected to Avaya Integral Enterprise PBX. Analog – ISDN Converter Connected to Avaya Integral Enterprise. One Analog – ISDN Converter is connected to ADM media module with one STSM sub modules for 8 analog trunks.

jane
Download Presentation

Analog – ISDN Converter

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Analog – ISDN Converter Connected to Avaya Integral Enterprise PBX

  2. Analog – ISDN Converter Connected to Avaya Integral Enterprise • One Analog – ISDN Converter is connected to ADM media module with one STSM sub modules for 8 analog trunks. • For each additional converter, one STSM sub module is needed. 1…4ISDN trunk 1…8Analog trunk/tie Analog Network Avaya Integral Enterprisewith ADM media module 1 2 3 6 4 5 Analog – ISDN Converter

  3. Analog – ISDN Converter Key features • Support of CLIP on analog line • Up to 32 trunk lines, only one slot in IE module for ADM board instead of 4 slots with ATx boards • Converter is connected to Integral Enterprise via ADM Media Module with STSM Submodule • No Media Module for analog trunk (ATA,ATB,ATC) needed

  4. Analog – ISDN Converter Front view Power LED

  5. Analog – ISDN ConverterRear view USB connectors Main switch Fuse IEC socket Line connectors

  6. Analog – ISDN ConverterConnection Options / rear • 8 analog trunk lines • 4 internal T0 port to connect to the BRA port of PBX • 4 internal T0 port for synchronization with an ISDN exchange line in hybrid mode • Line and PBX connections with terminal strips • 4 USB ports for individual converter programming • IEC socket • Fuse 200mA • Power switch

  7. Analog – ISDN ConverterFeatures • 8 analog trunk line ports • 4 internal T0 port for connection with BRA port of ISDN PBX • Caller ID (CLIP and CNIP) including date and time • Call forwarding (busy / no reply / unconditional) • Call brokerage (HOLD) • Conference calls (3PTY) • Automatic call back (CCBS) • Configuration software for Windows (2000/XP)

  8. Analog – ISDN ConverterTrunk line features * • Tone (DTMF) and Pulse dialling • Recognition of dial and busy tone • Number and name presentation (CLIP/CNIP) with date and time • Remedial suppression of the own number (CLIR) • Recognition of charge pulses (12 kHz / 16 kHz) • Flash at trunk line, duration adjustable • Call forwarding on busy, if nobody answers the call, permanent (CFB, CFNR, CFU) • Brokering (HOLD); flash time adjustable • Three-party conference call (3PTY) • Automatic callback to busy subscriber (CCBS) • Operating key sequences adjustable *If supported and activated by network provider

  9. Analog – ISDN ConverterISDN features * • Point to Multipoint (PTMP) and Point to Point (PTP) connection • Number and name presentation (CLIP/CNIP) with date and time • Remedial suppression of the own number (CLIR) • Charge information during the call (AOCD) • Call forwarding on busy, if nobody answers the call, permanent (CFB, CFNR, CFU) • Call Brokerage (HOLD) • Three-party conference call (3PTY) • Automatic callback to busy subscriber (CCBS) *Depending on the functions which are available at the trunk line

  10. Analog – ISDN ConverterTechnical data • Operating voltage: 230V AC; +/-10 %; 50 Hz, Internal power supply, fuse 200mA • Power consumption 12 W min., 24 W max. • Exchange line connection: 8 analog ports, DTMF, CLIP/CNIP support • Internal S0: 4 BRA, Point-to-Multipoint Connection (PTMP), Euro ISDN (DSS-1) • S0-synchronisation port: Point-to-Multipoint (PTMP) or Point-to- Point (PTP) Connection • PC/data connection: USB (V1.1, compatible to V2.0) • Case: Metal, 1 HU, 19“ chassis with Alloy front panel • Dimensions: (w x h x d) 483 mm x 44,4 mm x 300 mm • Weight: approx. 3,2 kg • Safety: CE

  11. Analog – ISDN ConverterSupplier Meiknologic GmbH Hölderlinweg 19a 64285 Darmstadt Germany Phone: +49-6151-6698653 Fax: +49-6151-912223E-Mail: info@meiknologic.de

More Related