1 / 20

Chapter 7 Negotiating Intersections

Chapter 7 Negotiating Intersections. THINK*PAIR*SHARE Why do you think the chances of a collision are greater at an intersection than at any other point on the roadway? (Your answer should be at least 2 sentences). INTERSECTION FACTS:

janus
Download Presentation

Chapter 7 Negotiating Intersections

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 7 Negotiating Intersections

  2. THINK*PAIR*SHARE Why do you think the chances of a collision are greater at an intersection than at any other point on the roadway? (Your answer should be at least 2 sentences)

  3. INTERSECTION FACTS: • The chances of a collision are greater at intersections than at any other point on a roadway. • Intersections are dangerous because many drivers cross paths there, and many unexpected stops occur there. • More than one-third of all collisions and one-fourth of all fatal collisions take place at intersections.

  4. INTERSECTION FACTS: (CONT) • One reason for the large number of collisions at intersections is the driver’s failure to identify a safe path of travel through the intersection. • Remember, you are not allowedto make lane changes within an intersection

  5. Intersection Designs • Most are simply two roadways crossing or a railroad crossing a roadway in a + or X pattern. • Others may form a Y when one roadway divides into two or when two join to form one. • Some meet to form a T. • A few are formed when several roadways meet at a circle called a traffic circle.

  6. Intersection Designs

  7. What type of intersection is this? What must you do at this intersection? Turn left close to yellow line Where should you position your vehicle?

  8. What type of intersection design is this??

  9. You are approaching a large circle intersection, with an inner lane and an outer lane. These are often confusing, exercise caution.

  10. You are approaching a large circle intersection, with an inner lane and a outer lane. These are often confusing, exercise caution. It is usually better to stay in the outer lane, this way, you won’t miss your exit.

  11. Approaching An Intersection • Plan a path of travel • Check Left front, center front, and right front. • 4-6 seconds from the intersection widen your visual scan. WHY? • Be ready to change path of travel to ensure safety.

  12. CONTROLLED VS. UNCONTROLLED INTERSECTIONS Controlled intersections are protected by a signal or sign. Regulates traffic. Two kinds of signs that control intersections are: 1.Stop 2. Yield Uncontrolled Intersections: No signs to regulate traffic. Usually found in areas of light traffic. In your own words, briefly describe the potential dangers associated with an uncontrolled intersection.

  13. What should you be doing at this intersection? Stale green…coast and cover brake in case light turns.

  14. RULES FOR UNCONTROLLED INTERSECTIONS When approaching an uncontrolled intersection always check to the left first and last!! Never assume that other traffic will stop or follow the rules of the road. Be sure that you can clearly see to the right and left. Always let others go first.

  15. HOMEWORK Complete the information and charts on page 3 and the vocabulary on page 4 of your packet. This is homework and should be completed before the next class.

  16. Controlled Railroad Crossing • Usually has red lights along with crossing gates. • Do NOT proceed around gates going down or are already down!!

  17. UNCONTROLLED RAILROAD CROSSING: Do not have flashing red lights or crossing gates. However, nearly all are marked with a sign as you approach them.

  18. Rules For Crossing Uncontrolled Railroad Tracks • Slow down. Check tracks to both sides and traffic to the rear as you approach crossing sign. • If a train is approaching, stop at a safe distance before the tracks. 3. When following school buses or trucks hauling flammable contents, be prepared to stop. Many states require such vehicles to stop before crossing railroad tracks.

  19. Gap: the distance between vehicles JUDGING THE SIZE OF A GAP • **You must be able to judge the gaps between vehicles and how long it takes to pass through or enter intersecting trafficlanes. **Gap= the distance between vehicles. **Crossing through traffic intersections, requires you to judge the size of gapsin traffic going in both directions. **When joining traffic, the size of the gap required increasesas the speed of traffic increases.

  20. HOMEWORK: Should be done for the next class Use the chart on page 144 in your book to complete the chart on page 6 in your packet. HOMEWORK: Should be done for the next class SITUATIONS WHERE YOU MUST YIELD: Use the pictures and information on pages 142-143 in your book to list what and who you must yield for in each of situation listed on the chart on page 6.

More Related