1 / 56

CHEMISTRY 1307 General Chemistry I

AP CHEMISTRY. CHEMISTRY 1307 General Chemistry I. Instructor : Mrs. Anna Mkrtchyan-Antonyan Classroom : 219 Phone : EX. 20 9 E-Mail: amkrtchyan@agbumds.org Text: Chemistry: Principles and Reactions Masterton • Hurley 5th Edition. CHEMISTRY:

janus
Download Presentation

CHEMISTRY 1307 General Chemistry I

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AP CHEMISTRY CHEMISTRY 1307General Chemistry I Instructor: Mrs. Anna Mkrtchyan-Antonyan Classroom: 219Phone: EX. 209 E-Mail:amkrtchyan@agbumds.org Text:Chemistry:Principles and Reactions Masterton • Hurley 5th Edition

  2. CHEMISTRY: Chemistry is the study of the properties, composition, and structure of matter, the physical and chemical changes it undergoes, and the energy liberated or absorbed during those changes.

  3. Why Study Chemistry? • 1. To better understand the world: what it is made of • and how it works. • 2. Because it is the most practical and relevant of the • sciences - chemistry is the study of EVERYTHING! • 3. It is the “Central Science” - All other sciences • intersect at and depend on chemistry. • 4. It is essential to the national and local economies.

  4. Chapter 1: Matter and Measurements

  5. Contents • Physical properties and states of matter • Système International Units • Uncertainty and significant figures • Dimensional analysis

  6. Properties of Matter Matter: Occupies space, has mass and inertia Examples:chairs gasoline clothes batteries people the earth paint paper oxygenwater salt aluminum air rocks Composition: Parts or componentsand their relative proportions ex. H2O, 11.9% H and 88.81% O H2O2, 5.93% H and 94.07% O Properties: Distinguishing features physical and chemical properties

  7. Matter and Change • Physical Property- A property displayed without a change in composition E.g. color. • Chemical Property – Ability or inability of a sample of matter to undergo a change in composition under stated conditions.

  8. Matter and Change • Physical Change - A change in which each substance involved in the change retains its original identity and no new elements or compounds are formed. H2O (s) H2O (l) “ice” Melting

  9. Matter and Change • Chemical Change(Chemical Reaction)- • A change that involves a change in composition. • One or more kinds of matter are converted to new kinds of matter with different compositions. • 2 H2 (g) + O2 (g) 2 H2O (l) • AgNO3 (aq) + HCl (aq) AgCl (s) + HNO3 (aq) “Reacting”

  10. Classification of Matter • Atom: Matter is made up of very tiny units called atoms. There are 115 different atoms. (The basis of elements) • Element: A substance made up of only a single type of atom. There are 115 elements ( 90 of them are from natural sources) • A substance that cannot be broken down (decomposed) into simpler substances by chemical reactions. • Compound: A combination of two or more different elements. • A substance composed of two or more elements chemically combined in fixed ratios by mass. Water -H2O Carbon dioxide -CO2 Sodium Chloride -NaCl Iron(II) sulfide - FeS • Molecule: The smallest entity having the same elemental combination as the compound.

  11. A molecule of water consists of three atoms: two hydrogen atoms joined to a single oxygen atom. A molecule of hydrogen peroxide has two hydrogen atoms and two oxygen atoms; the two oxygen atoms are joined together and one hydrogen atom is attached to each oxygen atom. By contrast, a molecule of the blood protein gamma globulin is made up of 19,996 atoms altogether, but they are of just four types: carbon, hydrogen, oxygen, and nitrogen.

  12. Substance: Pure elements and compounds are callled substances • Mixture: Combination of elements and compounds.

  13. Classification of Matter

  14. States of Matter • Phase - A sample of matter that is uniform in composition • and physical state and is separated from other phases by a definite boundary.

  15. Atomic and Molecular Concepts Plasma Nuclei Electrons Gas Temperature Atoms or Molecules Liquid Atoms or Molecules Crystalline Solid

  16. Elements that exist as gases at 250C and 1 atmosphere

  17. Energy Involved in Phase Changes Liberates Energy Gas Boiling Condensation Liquid Melting Freezing Solid Requires Energy

  18. Measurement • Chemistry is an Observational science. • Chemistry is a Quantitativescience. • Measurement -A quantitative observation.

  19. Measurement All measurements have three parts: 1.A value 26.9762g 2. Units 3.An Uncertainty Examples:33.2 mL 72.36 mm 426 kg 31 people

  20. Measurement Systems of Units -Standards of Measurement 1. The Need for Standards 2. The English System(What a pain!!!) 12 in/ft 3 ft/yd 5280 ft/mi 16 fl.oz/pt 2 pts/qt 4 qt/gal 16 oz/lb 2000 lb/ton 3. The Metric System -A decimal system meter (m) - Length liter (L) - Volume gram (g) - Mass

  21. Measurement Metric Examples: • 1 m = 1000 mm • 1 kg = 1000 g = 1 000 000 mg • 10 cm = 0.01 m = 0.000 01 km • 23 kL = 23 000 000 000 L • 1 mL = 0.001 L 4. The SI System -Système International d’Unitès A complete system of units adequate forthe entire realm of physical science.

  22. SI System of Measurement • Rules for Using the SI Systems • 1.Use only singular form of units and do NOT use a period after the symbol for the unit. 2. Use a dot on the base line for the decimal point. 23.6 m not 23,6 m 3. Group digits in threes around the decimal point and do NOT use commas. 1 000 000.000 003 km

  23. SI System of Measurement 4.Do NOT use spaces for four-digit measurements. 1645 mL or 0.2367 mg 5. Do NOT use the degree sign (o) for temperature recorded for the Kelvin temperature scale. 78.6 K not 78.6 o K

  24. Units S.I. Units Length metre, m Mass Kilogram, kg Time second, s Temperature Kelvin, K Quantity Mole, 6.022×1023 mol-1 Derived Quantities Force Newton, kg m s-2 Pressure Pascal, kg m-1 s-2 Eenergy Joule, kg m2 s-2 Other Common Units Length Angstrom, Å, 10-8 cm Volume Litre, L, 10-3 m3 Energy Calorie, cal, 4.184 J Pressure 1 Atm = 1.064 x 102 kPa 1 Atm = 760 mm Hg

  25. Common SI-English Equivalent Quantities Quantity English to SI Equivalent Length 1 mile = 1.61 km 1 yard = 0.9144 m 1 foot (ft) = 0.3048 m 1 inch = 2.54 cm (exactly!) Volume 1 cubic foot = 0.0283 m3 1 gallon = 3.785 dm3 1 quart = 0.9464 dm3 (Lt.) 1 quart = 946.4 cm3 1 fluid ounce = 29.6 cm3 Mass 1 pound (lb) = 0.4536 kg 1 pound (lb) = 453.6 g 1 ounce = 28.35 g

  26. Measurement 6. Uncertainty in Measurements - Exact Measurements: Measured values determined by counting or when a value is defined. Examples:31 people 27 rocks 2.54 cm = 1 in 106 mL = 1L The uncertainty in these measurements = 0 Non-exact Measurements: All other measurements. The last digit recorded is uncertain; it is estimated!! Examples:27.5 g 32.7 mm 12 467 km 1.156 x 102 mL

  27. Accuracy, Precision, & Sensitivity Accuracy - The degree to which a measured value agrees with the true or “accepted” value. Precision - The reproducibilityof a measured value. Sensitivity - The “fineness” of a measured value; the number of significant figures it has. 23.5673 gis a moresensitivemeasurement than23.57 g.

  28. Measurement Significant Figures: Each digit obtained as a result of a measurement. This includes all of the certain digits and the first uncertain digit. The number of significant figures in a measurement is an indicator of the SENSITIVITYof the measurement. How many significant figures are in the following: 65 mL 173.4 g 12.2 m 1 x 109 ns 2 4 3 1

  29. Measurement The Problem with Zero: 207.1 mm 0.002 36 mm 260.1 mm 0.123 00 mm 2040.0 mm 3600 mm • Rules for Significant Figures: • All non-zero digits are significant. 25.79 km 27 mL • A zero between other significant figures is significant. 207.9 nm 100.7 mL

  30. Measurement • Initial zeros are NOT significant. 0.001 23 cm3 • Final zeros after the decimal point ARE significant. 23.100 ps • Final zeros in a measurement with no decimal point may not be significant. 3200 cm Exact measurements have an infinite number of significant figures.(They are CERTAIN!!)

  31. Measurement Significant Figures in Calculations: In a measurement, the last significant figure is assumed to be uncertain. The result of a calculation involving measured values can be no more certain than the least certain measurement. The number of significant figures in a result depends on the number of significant figures in the measure- mentandon the mathematical operation being performed.

  32. Measurement • Significant Figures in Calculations: • Addition and Subtraction - A sum or a dif- ference of two or more measurements has the same number of decimal places as the measure- ment with the least number of decimal places. 35.2 mL + 0.34 mL = 35.5 mL 1.007 94 amu+ 1.007 94amu+ 15.9994 amu = 18.0153 amu amu = atomic mass units

  33. Measurement • Multiplication and Division - A product or quotient of two or more measurements has the same number of significant figures as the measure- ment with the least number of significant figures. density = (9.5760 g)/(12.2mL) = 0.785 g/mL • Round-off Rules - For digits 0 - 4,do not round up. For digits 5 - 9, round up.

  34. Measurement Round-off the following to two decimal places: 65.891 mL = 65.89 mL 23.044 39 =23.04 g 45.106 ms = 45.11 ms 30.1149 kg = 30.11 kg 37.995 ng = 38.00 ng • 6. Dimensional Analysis - An extremely useful tool • to help you solve mathematical problems. It is • based on the fact that when doing calculations • involving measured quantities, the units must be • added, subtracted, divided, or multiplied just like • the value of the measurements.

  35. Dimensional Analysis How many meters are in each of the following? 21 km 1023 570 mm 2.1 x 104 m (21 km)(1 x 103 m) = 21 x 103 m = km (1023 570 mm)( 1 m ) = (106mm) 1.023 570 m

  36. Measurement • 5. Conversion Factors - A fraction whose • numerator and denominator contain the same • quantity expressed in different units. 1 mile 5280 ft 5280 ft 1 mile 1 mile = 5280 ft = 1 = 1 cm 0.01 m 0.01 m 1 cm = 1 = 1 cm = 0.01 m 2.54 cm 1 in 1 in 2.54 cm = 1 = 1 in = 2.54 cm

  37. Dimensional Analysis How many mL are in 3.0 ft3? 1 ft = 12 in 1 in = 2.54 cm 1 cm3 = 1 mL (3.0 ft3)(12 in)(12 in)(12 in)(2.54 cm)(2.54 cm)(2.54 cm)(1 mL) (1 ft) (1 ft) (1 ft) (1 in) (1 in) (1 in) (1 cm3) = 8.5 x 104mL How many ns are in 23.8 s? (23.8 s)(109 ns) (1 s) = 23.8 x 109 ns = 2.38 x 1010 ns

  38. Classification of Properties of Matter • Properties can be classified as: • Physical or Chemical Properties • Intensive or Extensive Properties

  39. Properties of Matter • Physical Properties - Properties that do NOT involve substances changing into other substances. Melting Point Boiling Point Temperature Density Mass Volume • Chemical Properties - Properties that involve substances changing into other substances. Chemical Reactivity Reduction Potential Flammability Oxidation Potential

  40. Properties of Matter • Extensive Properties - Properties that depend on the amount of matter present in a sample. Mass Volume Heat Capacity • Intensive Properties - Properties that do NOT depend on the amount of matter present in a sample. Color Temperature Density Melting Point Specific Heat Boiling Point

  41. Mass and Weight Mass: the measure of the quantity or amount of matter in an object. The mass of an object does not change as its position changes. Mass is measured using a BALANCE. Weight: A measure of the gravitational attraction of the earth for an object. The weight of an object changes with its distance from the center of the earth. Weight is measured using SCALES.

  42. Sample Calculations Involving Masses 1.1 How many mg are in 2.56 kg? (2.56 kg)(103 g)(106mg) (1 kg) ( 1 g) = 2.56 x 109mg 1.2 How many g are in 2.578 x 1012 ng? (2.578 x 1012 ng) (1 g) (109 ng) = 2578 g

  43. Volume

  44. Sample Calculations Involving Volumes 1.3 How many mL are in 3.456 L? (3.456 L)(1000 mL) L = 3456 mL 1.4 How many mL are in 23.7 cm3? (23.7 cm3)( 1 mL )( 1 L_ _)(106mL) (1 cm3)(1000 mL)( 1L ) = 23 700 mL = 2.37 x 10 4mL

  45. Density Density - The mass of a unit volume of a material. density = mass/volume • 1.5 What is the density of a cubic block of wood that is • 2.4 cm on each side and has a mass of 9.57 g? volume = [2.4 cm x 2.4 cm x 2.4 cm] density = (9.57 g)/(13.8cm3) = 0.69 g/cm3= 0.69 g/mL Note that 1 cm3 = 1 mL

  46. Conversion What is the mass of a cube of osmium that is 1.25 inches on each side? Have volume, need density = 22.48g/cm3

More Related