1 / 1

Testing the interlock box

Tested all inputs to the box Temp Boards: “Too warm” tested and ok “Too cold” is firing a “too warm”, signal can be cleared by PVSS?!? Cooling and Vacuum PLC: tested and OK Tested all outputs: all HV channels ok all LV channels ok signals to cooling and motion PLC ok

jariah
Download Presentation

Testing the interlock box

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tested all inputs to the box • Temp Boards: • “Too warm” tested and ok • “Too cold” is firing a “too warm”, signal can be cleared by PVSS?!? • Cooling and Vacuum PLC: tested and OK • Tested all outputs: • all HV channels ok • all LV channels ok • signals to cooling and motion PLC ok • Tested internal logic of the box: • from PLCs and Temp Board inputs up to HV  all ok • To be done: • putting box in place, cable it up (2 lemos and 2 long flat cables to be made) • next week wrap-up meeting: decision on TB logic, plan final test and test plan for the future. • Population of spare PCB Testing the interlock box Ann, Tony, Stefano, Mark, Jan, Eddy, Martin, Luc 29/02/2008

More Related