1 / 17

Basic Trigonometry

Basic Trigonometry. Trigonometry. The word Trigonometry is derived from the ancient greek language and means measurement of triangles. “tri” meaning three. “gon” meaning sides. “metron” meaning measure.

jelam
Download Presentation

Basic Trigonometry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BasicTrigonometry

  2. Trigonometry • The word Trigonometry is derived from the ancient greek language and means measurement of triangles. • “tri” meaning three. “gon” meaning sides. “metron” meaning measure. • Trigonometry is the study of triangles. Using trig, you can solve many problems precisely where you may have only been able to approximate before. • Trig is used in everything from architecture to engineering.

  3. Timeline… • The earliest known work on Trigonometry was recorded in Egypt and Babylon. • Early astronomers used Trig to find out the distance of the stars and planets from the Earth.

  4. Parts of a Right Triangle Imagine that you are at Angle A looking into the triangle. The hypotenuse will always be the longest side, and opposite from the right angle. The opposite side is the side that is on the opposite side of the triangle from Angle A. The adjacent side is the side next to Angle A.

  5. Review B For Angle A Hypotenuse This is the Opposite Side Opposite Side Opposite Side This is the Adjacent Side A Adjacent Side Adjacent Side B For Angle B Hypotenuse This is the Opposite Side This is the Adjacent Side A

  6. Trig Functions • Sine = sin • Cosine = cos • Tangent = tan • Cosecant = csc • Secant = sec • Cotangent = cot

  7. Trig Ratios Hypotenuse • Each of the 3 ratios has a name • The names also refer to an angle Opposite A Adjacent

  8. SOHCAHTOA B Here is a way to remember how to make the 3 basic Trig Ratios if we are talking about angle A Hypotenuse Opposite A Adjacent 1) Identify the Opposite and Adjacent sides for the appropriate angle • SOHCAHTOA means Sin is Opposite over Hypotenuse, Cos is Adjacent over Hypotenuse, and Tan is Opposite over Adjacent Put the underlined letters to make SOH-CAH-TOA

  9. Examples of Trig Ratios P First we will find the Sine, Cosine and Tangent ratios for Angle P. 20 12 Next we will find the Sine, Cosine, and Tangent ratios for Angle Q Q 16 Remember SohCahToa

  10. Activity: Draw a right triangle on your paper. Use your angle ruler to ensure you get as close to exactly a 90 degree angle as you can. Pick one of the other angles and label it Angle A. Determine which side of your triangle is the hypotenuse, opposite and adjacent. (Label these) Measure (cm) the length of the hypotenuse, opposite side and the adjacent side in cm. Jot these measurements down. Find your three trig ratios. Sin A = ? Cos A = ? Tan A = ? Once you figure these out, write them down on your paper. Also write these ratios as a decimal (round to two decimals) Next, actually measure angle A with your angle ruler and label it. Make sure your calculator is in degree mode if you are using degrees and radian mode if you are using radians, take the sin of whatever angle you measured, does this match your ratio? Do this for Cos and Tan. Jot this down.

  11. Triangle Definitions of other Trig Functions

  12. SOHCAHTOA β

  13. WE CAN USE OUR TRIGONOMETRY KNOWLEDGE TO SOLVE FOR A MISSING SIDE LENGTH IF WE KNOW THE ANGLE!!! 1. 2. c a

  14. SOHCAHTOA Practice

  15. Engineering ConnectionSometimes engineers cannot directly measure an object's size or distance because it would take too much time, or it is physically impossible (a tape measure to find the distance from the Earth to Pluto?). Instead of actually measuring a size or distance, engineers use trigonometry and other mathematical relationships to estimate it very accurately.

  16. Activity You need to find the exact distance across the river from your tree (green tape) to the tree directly across the river (partners green tape). HOWEVER… there are rules. Only four of them… 1. You may not measure across the river. (This includes measuring string draped across the river.) 2. You must use trig ratios of some sort to figure out this distance. 3. You may only use the tools you have been given… 4. You may not walk in the river. That is all… may the odds be ever in your favor.

More Related