1 / 11

30.08.2014

January 2010. VARIMAT V2. Instruction manual Bitumen Kit Product Marketing Manager Roland Beeler October 2013. 30.08.2014. Copyrigth (c) Product Managment Leister. 1. Kit overview. 1. Pressure wheel with protection coverage 2. Bitumen nozzle 3. Additional weight for more pressure

jeneil
Download Presentation

30.08.2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. January 2010 • VARIMAT V2 • Instruction manual • Bitumen Kit • Product Marketing Manager • Roland Beeler • October 2013 30.08.2014 Copyrigth (c) Product Managment Leister 1

  2. Kit overview 1. Pressure wheel with protection coverage 2. Bitumen nozzle 3. Additional weight for more pressure 4. Heating element 6100W for 400V version 5. Connection link 6. Suspension Spring, for proper balancing of the frame. 1. 4. 2. 3. 6. 5. Copyrigth (c) Product Managment Leister

  3. Step 1 • Change pressure wheel Copyrigth (c) Product Managment Leister

  4. Step 2 • Install protection coverage Copyrigth (c) Product Managment Leister

  5. Step 3 • Swing the air dam pulley down to expose the suspension spring. Remove the standard spring assembly. Insert the new suspension spring assembly into the tapped hole in the underside of the VARIMAT V2. The spring must be installed for proper balancing of the frame. Copyrigth (c) Product Managment Leister

  6. Step 4 • Replace the air dam belt: Slide the green air dam belt over the Wide Weld pressure wheel so that it sits in the groove at the bottom of the Wide Weld pressure wheel. Ensure the air dam belt is not twisted. Pull the air dam belt to the rear air dam pulley, ensuring that the air dam belt is in the track grooves of the two intermediate pressure wheels. Copyrigth (c) Product Managment Leister

  7. Step 5 • Remove the back-roller slide-plate knob. • Install connection link Copyrigth (c) Product Managment Leister

  8. Step 6 • Change heating element for 400V version Copyrigth (c) Product Managment Leister

  9. Step 7 • Carefully slide the new nozzle over the mica tube and use the four mounting screws that were on the 40-mm nozzle. Ensure the ground wire is reconnected. Copyrigth (c) Product Managment Leister

  10. Step 8 • Do the nozzle alignment if necessary Copyrigth (c) Product Managment Leister

  11. Thanks for your attention Copyrigth (c) Product Managment Leister

More Related