1 / 8

Pass4sure 400-101 Braindumps

Want to get certified CCIE 400-101. No need to worry about it now. Pass4sure Braindumps provides you real exam questions with 100% passing assurance.<br>Our dumps are 100% accurate and compiled by the Professionals. Get 20% discount on CCIE 400-101. Limited time offers.<br>Visit us for more info and latest dumps.

jenifer2426
Download Presentation

Pass4sure 400-101 Braindumps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cisco 400-101 exam in just 24HOURS! 100% REAL EXAM QUESTIONSANSWERS Cisco400-101 Buy Complete Questions Answers Filefrom http://www.pass4surebraindumps.com/400-101.html 100% Exam Passing Guarantee & Money BackAssurance

  2. QUESTION1: Which two options are causes of out-of-order packets? (Choosetwo.) a routingloop a router in the packet flow path that is intermittently droppingpackets highlatency packets in a flow traversing multiple paths through thenetwork some packets in a flow being process-switched and others being interrupt- switched on a transitrouter Answer: D,E QUESTION2: A TCP/IP host is able to transmit small amounts of data (typically less than 1500 bytes), but attempts to transmit larger amounts of data hang and then timeout. What is the cause of thisproblem? A link is flapping between two intermediatedevices. The processor of an intermediate router is averaging 90 percentutilization. A port on the switch that is connected to the TCP/IP host is duplicating traffic and sending it to a port that has a sniffer attached. There is a PMTUD failure in the networkpath. Answer:D QUESTION3: Refer to the exhibit. ICMP Echo requests from host A are not reaching the intended destination on host B. What is theproblem?

  3. The ICMP payload ismalformed. The ICMP Identifier (BE) isinvalid. The negotiation of the connection failed. The packet is dropped at the nexthop. The link iscongested. Answer:D QUESTION4: Refer to the exhibit. Which statement istrue?

  4. It is impossible for the destination interface to equal the sourceinterface. NAT on a stick is performed on interfaceEt0/0. There is a potential routingloop. This output represents a UDP flow or a TCPflow. Answer:C QUESTION5: Which three conditions can cause excessive unicast flooding? (Choosethree.) Asymmetricrouting RepeatedTCNs The use ofHSRP Frames sent toFFFF.FFFF.FFFF MAC forwarding tableoverflow The use of Unicast Reverse PathForwarding Answer: A, B,E QUESTION6: Which congestion-avoidance or congestion-management technique can cause globalsynchronization? Taildrop Random earlydetection Weighted random earlydetection Weighted fairqueuing Answer:A QUESTION7: Which two options are reasons for TCP starvation? (Choosetwo.)

  5. The use of taildrop The use ofWRED Mixing TCP and UDP traffic in the same trafficclass The use of TCP congestioncontrol Answer: C,D QUESTION8: Refer to the exhibit. While troubleshooting high CPU utilization of a Cisco Catalyst 4500 Series switch, you notice the error message that is shown in the exhibit in the log file. What can be the cause of this issue, and how can it be prevented? The hardware routing table is full. Redistribute from BGP intoIGP. The software routing table is full. Redistribute from BGP intoIGP. The hardware routing table is full. Reduce the number of routes in the routing table. The software routing table is full. Reduce the number of routes in the routing table. Answer:C QUESTION9: Refer to the exhibit. Which two are causes of output queue drops on FastEthernet0/0? (Choosetwo.)

  6. an oversubscribed input service policy onFastEthernet0/0 a duplex mismatch onFastEthernet0/0 a bad cable connected toFastEthernet0/0 an oversubscribed output service policy onFastEthernet0/0 The router trying to send more than 100 Mb/s out ofFastEthernet0/0 Answer: D,E QUESTION10: Refer to the exhibit. Which statement about the output istrue?

  7. The flow is an HTTPS connection to the router, which is initiated by 144.254.10.206. The flow is an HTTP connection to the router, which is initiated by 144.254.10.206. The flow is an HTTPS connection that is initiated by the router and that goes to 144.254.10.206. The flow is an HTTP connection that is initiated by the router and that goes to 144.254.10.206. Answer:A • Buy Complete Questions Answers Filefrom • PDF Version + Test Engine Software Version • 90 Days Free UpdatesService • Valid for AllCountries

  8. http://www.pass4surebraindumps.com/400-101.html

More Related