1 / 20

Overview of Loads ON and IN Structures / Machines

Overview of Loads ON and IN Structures / Machines. Overview of Various Stress Patterns. Solution of Example Problem 4.3. Step 1 – Construct shear&moment diagrams Step 2 – Find d min =0.90in to resist  allowable =35,000psi at section where M max =2500in-lb

jennifer-rodriquez
Download Presentation

Overview of Loads ON and IN Structures / Machines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Overview of Loads ON and IN Structures / Machines

  2. Overview of Various Stress Patterns

  3. Solution of Example Problem 4.3 • Step 1 –Construct shear&moment diagrams • Step 2 –Find dmin=0.90in to resist allowable=35,000psi at section where Mmax=2500in-lb • Step 3 –Find dmin=0.56in to resist allowable=20,200psi for maximum direct average shear stress • Step 4 –Find dmin=0.65in to resist allowable=20,000psi for maximum transverse shear stress

  4. Example 4.2- Calculation of Transverse Shear Stresses • Hollow rectangular cross-section (Channel) • Moment of Inertia about neutral axis, Izz=8.42 in4 • Max. transverse shear stress at neutral axis • Direct application of “area moment” method • xy(max)=0.34V, xy(ave)=0.2V, so that • xy(max) =1.7 xy(ave)=1.7(F/A)….Table 4.3 • Divide irregular section into several regular parts • Transverse shearing stress distribution, xy(y)

  5. Summary of Solutions to Textbook Problems – Problem 4.10 • Module support D6AC steel beam with two small hole and cracks • Ignore for now stress concentrations&fracture mechanics • Beam subjected to four-point bending • Uniform bending moment at mid-span, M=PL/3 =281.25 kN-m • No transverse shear stress in central span, V =0 • Check for possible failure by yielding • Max. bending stress at: • The tip of bottom crack, yct =10.3cm, x(ct)=(M*yct)/Izz=556 MPa • At the outer fibers: x(max)=(281.25x103)(12.5x10-2)/5.21x10-5=675 Mpa • From Table 2.1, Syp=1570MPa, so that the “safety factor” is equal to 1570/675=2.3  NO yielding

  6. Summary of Solutions to Textbook Problems – Problem 4.15 • Short tubular cantilever bracket, AISI 1020 steel (CD) • Critical points at the wall: • Top and bottom fibers for bending • At neutral axis for transverse shearing stress • Calculate maximum stresses • Axial bending stress: x=48,735 psi • Transverse shear: use Table 4.3 to obtain yz(ts)=2(F/A)=48,890psi • Yielding failure mode for uniaxial tensile stress • No failure since Table 3.3 shows Sy=51,000psi>48,735 psi • Multiaxial failure theory is necessary for yz(ts)

  7. Example 4.5- Calculation of Stresses in Channel-Section Cantilever Beam • Determine maximum bending stress • z(max)=48000(2.0)/4.74 =20,250 psi, Ixx=4.74in4 • Max. transverse shear at neutral axis • Area moment methods yields: zy(max)= 7720 psi • Flow of torsional shearing stresses • Locate SHEAR CENTER by using Table 4.5: e=0.56 in • Find torsional moment since the plane of “P” is located at a distance a=1.26 in. from the shear center: T=Pa =10,080 in-lb • Find horizontal shear forces that form resisting couple, T = Rd • Maximum torsional shearing stresses in the flanges: • zx(max)= R/Af= 2739/((1.72)(0.32)) = 4976 psi • Could be eliminated by translating the plane of “P” by 1.26in to the left

More Related