100 likes | 114 Views
GCS400 Lift & Tilt Dozer Control System. Configuration Guide August 2003. Table of Contents. GCS400 Features GCS400 Components Component Features. End. GCS400 – Key System Features. Dual Laser Control System Controls Lift & Tilt for the blade of bulldozers CAN System Architecture
E N D
GCS400 Lift & Tilt Dozer Control System Configuration Guide August 2003
Table of Contents GCS400 Features GCS400 Components Component Features End
GCS400 – Key System Features • Dual Laser Control System • Controls Lift & Tilt for the blade of bulldozers • CAN System Architecture • Plug & Play System Configuration • Modular • Can be adapted to suit application • Independent & Linked Mode Operation • Rapid Setup on benchmark • Simultaneous drive of Laser Receivers on both masts into the beam
GCS400 System Components LR400 LR400 EM400 CB420 EM400 VM410 M2-T Control Valve PM400 M2-T
CB420 Control Box Key Features • Rugged • Computer Area Network (CAN) based • Dual Laser Control • Simple operation • Toggle and push button switches • Dual LED grade displays • Day or Night operation • Display compensates for varying light conditions • Display compensates for temperature maintaining sharp contrast • Built in Audio Signals to warn of grade errors, switch activation, and system health. • Can be quickly removed for storage when not in use.
LR400 Linear Laser Receiver • Key Features • Combined laser detector and grade display unit • Linear Receiver – Accurate over the full detection range • 360 laser detection • 100% Weatherproof • Grade display uses auto-dimming LEDs that can be viewed comfortably in any conditions, including bright sunlight. • Selectable on-grade accuracy allows configuration of the LR400 to match the job site tolerances. • Industry standard CAN (SAE J1939) interface makes for reliable communication between components
EM400 Electric Mast Key Features • Electric motor operated lead screw for positioning the height of the LR400 laser receiver • The EM400 is used with the M2-T heavy-duty shock mount for mounting over the cutting edge of the blade • In cab, elevation adjustments provide safe and accurate methods for benching the machine’s blade to finish grade • Fine elevation adjustments • Elevation offsets for rough cuts / material balancing • While moving or stationary.
M4 Mast Shock Mount Key Features: • Heavy duty to handle jobsite conditions • Protects electric and manual masts from heavy shock and vibration
PM400 Power Module Key Features • Delivers clean filtered power from 12 or 24 volt machines • Delivers reliability to the GCS400 in rugged / tough conditions.
VM410 Valve Drive Module Key Features • Dual control channels for driving Danfoss proportional voltage reference valves • Industry standard J1939 CAN interface means that system communication has never been more reliable.