1 / 9

Millipore DI Water Purifier

Millipore DI Water Purifier. Ron Kmak, Zeljko Matijas, Laura Skubal, Dean Walters, and Bob Wagner 28 September 2011. Timeline of events. 28 April 2011 f irst discussion of water purifier 26 May 2011 specification of purifier settled on. Discussion of M illipore versus Crossbow purifiers

jenny
Download Presentation

Millipore DI Water Purifier

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Millipore DI Water Purifier Ron Kmak, Zeljko Matijas, Laura Skubal, Dean Walters, and Bob Wagner 28 September 2011

  2. Timeline of events • 28 April 2011 first discussion of water purifier • 26 May 2011 specification of purifier settled on. • Discussion of Millipore versus Crossbow purifiers • 28 June 2011 Millipore quotation distributed. • 7 July 2011 demonstration by Millipore of DI purifier • 19 July 2011 requisition entered into the purchasing system • 22 August 2011 Millipore enters order into their system. • 8 September 2011 Millipore system arrives • 15 September 2011 wall brackets mounted on wall • 22-23 September 2011 check out parts fit-up • 27 September 2011 Millipore installs unit & trains staff

  3. Planning • The DI Water Purifier has been planned for the south west corner of the Wet Lab (C-248). • This location facilitates DI water consumption in both the Wet Lab and the Photocathode Lab

  4. Quotation • The Millipore Integral 10 system was sized to have the capacity and the flow for the anticipated needs of the Wet Lab. • The Integral 10 comes with (2) type 1 water dispensers, ultra pure, and (1) type 2 water dispenser, pure water. • It was noted that SSL uses type 1 water to clean their parts. • The APS clean line uses type 2 water to clean parts for vacuum usage.

  5. Installation Preparations Blank Canvas Bracket Locations

  6. Ready for Installation

  7. Installation by Millipore John Halloran Millipore Corp.

  8. Complete

  9. Future Tasks • Dispenser in Photocathode Lab • Cut hole into wall between Wet and Photocathode Labs. • Need either table or shelf for the MilliQ (type 1) dispenser. • Fume hood dispenser • Need table or shelf for the MilliQ dispenser • Install feed tube for filling the Citranox or rinse tanks.

More Related