1 / 12

E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer

V aliant C ommunications L imited. Telecom Transmission Solutions. E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer. INDIA Valiant Communications Limited 71/1, Shivaji Marg, New Delhi - 110015, India

jenski
Download Presentation

E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Valiant Communications Limited Telecom Transmission Solutions E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer INDIA Valiant Communications Limited71/1, Shivaji Marg, New Delhi - 110015, India Phone: +91-11 4105 5601, 91-11 4105 5602 Fax: +91-11 4105 5604, 91-11 2543 4300 E-mail: getinfo@valiantcom.com Website: http://www.valiantcom.com U.K. Valiant Communications (UK) Ltd 1, Acton Hill Mews, 310-328 Uxbridge Road, London W3 9QN, United Kingdom E-mail: gb@valiantcom.com Website: http://www.valiantcom.com U.S.A. Valcomm Technologies Inc. 4000 Ponce de Leon, Suite 470Coral Gables, FL 33146United States of America E-mail: us@valiantcom.com Website: http://www.valiantcom.com Updated : March, 2007

  2. E2 , 2Mbps x 4 - Opti Multiplexer Product Overview • VCL-E2, Opti Multiplexer (4E1) is an Integrated OLTE and multiplexer/ demultiplexer unit, basedon PDH (Plesiochronous Digital Hierarchy) technology • It multiplexes four 2.048Mbps (hereafter referred to 2Mbps) E1 tributaries into a single 8Mbps, E2 stream and then transports it as an optical signal on a Single Mode, 1300nm optical fiber cable, without the use of ant signal repeaters up to a distance of over 50KM (optical loss budget 30dBm) • On the demultiplex side, it receives the optical signal and demultiplexes it into 4, electrical E1 signals • This device provides data and extracted jitter free clock meeting the G.703 standards • These include loss of signal at E1, loss of signal at E2, loss of frame sync at E2, detection of AIS at E2 and bit error exceeding 1 in 1000 • VCL-E2, Opti Multiplexer is available in • 1310nm • 1550nm.

  3. E2 , 2Mbps x 4 - Opti Multiplexer Features • A compact solution that performs E1 to E2 multiplexing • and de-multiplexing and provides an 8Mbps • Optical interface (8Mbps OLTE) in a single card • Conforms to ITU recommendations G.742 • Performs Second order Mux as per G.742 • Loss of signal and AIS detection as per G.775 • Tributary and higher order loop backs supported • Supports tributary loopbacks for commands received from far end based on • stuff bit polarity • Single-card implementation • Highly reliable and compact • Standard CCITT Interfaces • Class I Laser

  4. E2 , 2Mbps x 4 - Opti Multiplexer Highlights • Remote and local terminal monitoring and control through a PC Com port using • VCL-Opti Multiplexer, Network Management System • Extensive alarms and status indication facility • Operates on nominal -48V DC input • Distributed on-board power supply • Microprocessor controlled with powerful diagnostic facilities for both remote and local systems • Local and remote loopback facility for the 8Mbps stream for diagnostics • Programmable auto-laser shut down feature for greater safety • Capable of synchronizing on any of the clock sources - internal, or • extracted (loop-timed).

  5. E2 , 2Mbps x 4 - Opti Multiplexer Front Panel View of VCL-E2 Opti Multiplexer Tx Rx VCL-E2 OPTI MULTIPLEXER 1 2 3 4 5 7 6 19 inch Shelf LEDs Indications +5V DC present -48V DC present Loss of signal at 2Mbps - channel 4 Loss of signal at 2Mbps - channel 3 Loss of signal at 2Mbps - channel 2 Loss of signal at 2Mbps - channel 1 AIS at 8Mbps Optical signal - Sync Green = Sync., Optical signal present Red = Loss of Sync., Optical signal absent.

  6. E2 , 2Mbps x 4 - Opti Multiplexer Rear View of VCL-E2 Opti Multiplexer(120 Ohms Ver.) (120 Ohms balanced E1 ports) 120 Ohms, RJ-45, E1 Interface Connectors - 4, E1 Channels Power Audio Alarm Video Alarm Network/System Management Port

  7. E2 , 2Mbps x 4 - Opti Multiplexer Rear View of VCL-E2 Opti Multiplexer(75/120 Ohms Ver.) (120 Ohms balanced, 75 unbalanced E1 ports) E2, Opti Multiplexer Back View 75 Ohms BNC, E1 Interface Connrctors - 4 E1 channels

  8. E2 , 2Mbps x 4 - Opti Multiplexer Technical Specifications 2Mbps, E1 Electrical Interface • Number 4 • Nominal bit rate 2048kbps • Bit rate tolerance ± 50ppm • Termination Impedance 120 Ohms • Line code HDB3 • Frame structure As per G.704 • Electrical Interface As per G.703 • Peak Voltage of a mark • For 120 W Balanced interface 3.0 V ± 0.3 V • 75 W Unbalanced interface 2.37 V ± 0.237 V • Peak Voltage of a space • for 120 W Balanced interface 0 V ± 0.3 V • 75 W Unbalanced interface 0V ± 0.237 V Continue..

  9. E2 , 2Mbps x 4 - Opti Multiplexer • Maximum Output Jitter 0.05UI • Maximum Input Jitter • 20Hz to 93Hz 1.5UI • 700Hz to 100Hz 0.2UI • Connectivity RJ-45 Connectors, (120 Ohms, balanced) and • BNC (75 Ohms, unbalanced) • Cable 120 Ohms balanced, 75 Ohms unbalanced • Permissible Attenuation 6dB (max) @1024KHz • Return Loss at input port • 51.2KHz to 102.4KHz >12dB • 102.4KHz to 2048KHz >18dB • 2048KHz to 3072KHz >14dB Continue..

  10. E2 , 2Mbps x 4 - Opti Multiplexer 8 Mbps, E2 Optical Interface • Transmitter • Type of Transmitter Class I Laser • Number 1 • Nominal bit rate 8.448Mbps, +/-30PPM Kbps • Transmit wavelength 1310nm • Transmit output 0dBm to -3dBm (average) • Extinction ratio >1:10 • Transmit Spectral Width <4nm • Receiver • Number 1 • Receiver sensitivity -37dBm (typical) • -36dBm (min) • Receive wavelength 1310nm • Operating wavelength range 1280-1335nm • Receiver dynamic range 20dBm • Optical Connectors FC-PC connector

  11. E2 , 2Mbps x 4 - Opti Multiplexer Valiant’s Products • Digital Access Cross Connects - E1 / T1 , E3, DS3, 10/100 BaseT Ethernet • Groomers (Hi-Z Non-intrusive Hi-Impedance Monitoring) • 1+1 APS (Automatic Protection Switching) • Echo Canceller & Voice Quality Enhancement Solutions - E1, T1, DS3 and STM-1 • E1 Drop-Insert (Add-Drop) Voice and Data Multiplexers • E1, T1, E3, DS3, Ethernet Converters • STM-1 Add Drop Multiplexer with Ethernet • GSM Gateways - E1/T1 • E1 PRI ISDN (Euro ISDN) Q.931 Multiplexers • Channel Banks • E2 (4 E1), 2/34 Mbps PDH Multiplexer, 34 Mbps OLTE • Remote Site Monitoring Equipment

  12. E2 , 2Mbps x 4 - Opti Multiplexer Thank you for your attention For more details visit us at our Website at http://www.valiantcom.com INDIA Valiant Communications Limited71/1, Shivaji Marg, New Delhi - 110015, India Phone: +91-11 4105 5601, 91-11 4105 5602 Fax: +91-11 4105 5604, 91-11 2543 4300 E-mail: getinfo@valiantcom.com Website: http://www.valiantcom.com U.K. Valiant Communications (UK) Ltd 1, Acton Hill Mews, 310-328 Uxbridge Road, London W3 9QN, United Kingdom E-mail: gb@valiantcom.com Website: http://www.valiantcom.com U.S.A. Valcomm Technologies Inc. 4000 Ponce de Leon, Suite 470Coral Gables, FL 33146United States of America E-mail: us@valiantcom.com Website: http://www.valiantcom.com

More Related