150 likes | 272 Views
Hella utilizes a combination of low tone (300Hz) and high tone (500hZ) disk-type horns to project a powerful 118dB sound. These horns are the go to replacement for the faint stock Subaru horns!
E N D
HellaSupertone Horn Kit: • We've all been there, someone cuts you off and you lay on the horn hoping to make your presence known although as most Subaru owners have found the stock horns leave much to be desired. The highly popular HellaSupertones are the horns to have for getting the attention of other vehicles on the road.
Hellautilizes a combination of low tone (300Hz) and high tone (500hZ) disk-type horns to project a powerful 118dB sound. These horns are the go to replacement for the faint stock Subaru horns!
SubimodsHella Horn Bracket: The Subimods Horn Bracket was the first of its kind! Designed in house and produced out of high quality aluminum which is percisely bent for added strength. Our horn bracket allows for simple no hassle mounting our your HellaSupertones.
Unlike other manufactures when desiging our bracket we sat down and confirmed that our bracket would fit on the most popular Subaru models this created a uniquely designed universal bracket that can be utilized on your favorite Subaru models! As always all of our Subimods products are made right here in United States.
Our Subimods Horn Bracket is by far the most tried and popular solution to mount your HellaSupertone Horn Kit with tens of thousands sold this is proven.
Subimods V2 Hella Horn Harness: • Many customers do not realize that when you purchase a set of HellaSupertone Horns you will only receive a relay and some brief instructions on how the horns should be connected, some customers aren’t fully equipped to handle such a task others just don’t have the time to deal with making there own Wiring Harness from scratch.
We are proud to release our new V2 Wiring Harness. This newly released harness keeps our 100% plug and play nature while adding some new features such as a waterproof Hella relay and socket, fully sealed nylon braided exterior and high quality heat shrink connectors. These features equal a truely element proof design that is sure to have your horns blaring for years!
Other companies may produce a similar harness but don't be fooled, our Subimods V2 wiring harness is the only one of its kind. We took the time to listen to our customers and redesign our harness for their needs! Our product is designed to be 100% plug and play, that means no cutting, splicing, taping or assembly required by you!
Fitment: • Most Pre 2002 Impreza, Legacy and Forester Models • 2002-2014 Impreza, WRX and STI (Excludes 2012-2014 Impreza Models) • 2003-2014 Legacy (Including GT and Outback Models) • 2002-2014 Forester (Including XT)
Fitment Notes: • On the 2012-2014 Impreza N/A models you must connect the trigger wire from the factory horn located under the passanger side headlight. • This product will not fit on the 2015 WRX/STI Chassis due to a redeisgned stock horn connector. (please use the 2015+ combo kit)
For more information, visit us https://subimods.com/