1 / 15

Propel Oil Management Six Stages

Lubricant is monitored to determine the current condition and combined with previous results to provide a lubricant condition trend.

jesika01
Download Presentation

Propel Oil Management Six Stages

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Propel Oil Management Six Stages

  2. Step 1 – CONDITION MONITOR Lubricant is monitored to determine the current condition and combined with previous results to provide a lubricant condition trend.

  3. Step 2 – REPORT Report percentage remaining useful life (% RUL), remaining additive content, water contamination and ISO rated oil cleanliness to identify when lubricant renewal is required.

  4. Step 3 – FILTRATION Lubricants can be filtered to as low as 1 micron and ISO cleanliness to the most demanding specifications, including ISO 4406 13/11/09

  5. Step 4 – DEHYDRATION With lubricants, “The most effective water removal technology is vacuum dehydration”.

  6. Water removal is performed continuously using vacuum dehydration in the PROPEL process, and can achieve down to 20ppm moisture content.

  7. Step 5 – ADDITIVE REPLACEMENT Critical additives, that are present in new oil to protect the base oil, are replaced in the same concentration levels as found in new oil.

  8. This process effectively brings the lubricant back to as good as new specification or in some cases, higher.

  9. Step 6 – CERTIFICATON To certify and report that the renewed lubricant meets or exceeds new oil specification.

  10. For more details information, visit us http://www.biokem.com.au/

More Related