1 / 12

PREPAR ING C – SILICONES

PREPAR ING C – SILICONES. PREPARING SILOFLEX PLUS. Easy processing. Easy dosage, short mixing time, easy check of homogeneously mixed material with colour contrast catalyst. PREPARING SILOFLEX PLUS PUTTY. dosage. dose putty material using measuring spoon

jesse
Download Presentation

PREPAR ING C – SILICONES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PREPARING C – SILICONES

  2. PREPARING SILOFLEX PLUS Easy processing Easy dosage, short mixing time, easy check of homogeneously mixed material with colour contrast catalyst

  3. PREPARING SILOFLEX PLUS PUTTY dosage • dose putty material using measuring spoon • impress the edge of the spoon into the selected putty • 2 strand-lengths of the catalyst (8 cm) per 1 spoon An excess amount of catalyst shortens the working and the setting times.

  4. PREPARING SILOFLEX PLUS PUTTY 45 s mixing • knead the substance thoroughly to achieve ahomogeneous colour without pink stripes !!! Work in protective gloves only !!!

  5. Method of double impressionPUTTY APPLICATION Application on the tray Inserting into the mouth Outlet holes cutting Impression

  6. PUTTY

  7. PREPARING SILOFLEX PLUS LIGHT dosage mixing 1:1 30 s • mix until a homogeneous colour is achieved, spread thoroughly along the pad to achieve a smooth consistency without bubbles

  8. Method of double impressionLIGHT APPLICATION Applying Light to the tray Inserting and fixing in the mouth

  9. Method of double impression

  10. IMPRESSION - PROCESSING • Impression - disinfection Disinfection in standard disinfection solution (e. g. Jodisol diluted with water at a ratio of1:10) • Store the impression at room temperature (up to 25 ºC) • Plaster can be placed in the impression 30 minutes from removal of the impression from the mouth • There are no time limitations, but it is recommended to cast within 4 hours.

  11. PREPARING SILOFLEX PLUS Mistakes in preparation • non-homogeneous mixing – it can cause a foliated impression • Too quick setting, resp. no setting due to mixing ratio • Bad reproduction – impression at the end of working time

  12. Thank you for your attention!

More Related