1 / 55

SHM

SHM. Hr Physics Chapter 11 Notes. Simple Harmonic Motion Objectives . Identify the conditions of simple harmonic motion. Explain how force, velocity, and acceleration change as an object vibrates with simple harmonic motion. Calculate the spring force using Hooke’s law.

Download Presentation

SHM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SHM Hr Physics Chapter 11 Notes

  2. Simple Harmonic Motion Objectives • Identify the conditions of simple harmonic motion. • Explain how force, velocity, and acceleration change as an object vibrates with simple harmonic motion. • Calculate the spring force using Hooke’s law.

  3. Simple Harmonic Motion • Simple Harmonic Motion gives a regular repeating action. • Any periodic motion that is the result of a restoring force that is proportional to displacement. • Springs, Masses, Pendula, and Bells, exhibit a periodic motion, therefore, SHM.

  4. Hooke's Law • Hooke's Law says that the restoring force due to a spring is proportional to the length that the spring is stretched, and acts in the opposite direction. If we imagine that there are no other forces, and let x represent the distance the spring is stretched at time t then the restoring force might be represented as -kx where k is the spring constant and k > 0.

  5. Hooke’s Law Demonstration

  6. Hooke’s Law Concept Check • If a mass of 0.55 kg attached to a vertical spring stretches the spring 36 cm from its original equilibrium position, what is the spring constant?

  7. Hooke’s Law Concept Check • 15 N/m

  8. Hooke’s Law Concept Check • A load of 45 N attached to a spring is hanging vertically stretches the spring 0.14 m. What is the spring constant?

  9. Hooke’s Law Concept Check • 3.2 x 102 N/m

  10. Hooke’s Law Concept Check • A slingshot consists of a light leather cup attached between two rubber bands. If it takes a force of 32 N to stretch the bands 1.2 cm, what is the equivalent spring constant of the two rubber bands?

  11. Hooke’s Law Concept Check • 2.7 x 103 N/m

  12. Hooke’s Law Concept Check • How much force is required to pull a spring 3.0 cm from its equilibrium position if the spring constant is 2.7 x 103 N/m?

  13. Hooke’s Law Concept Check • 81 N

  14. The Simple Pendulum • The restoring force is a component of the bob’s weight, so F= Fg sin θ • For small angles (less than 15ْ ), the motion of a pendulum approximates simple harmonic motion.

  15. Measuring Simple Harmonic Motion Objectives • Identify the amplitude of vibration • Recognize the relationship between period and frequency • Calculate the period and frequency of an object vibrating with simple harmonic motion

  16. Galileo’s Laws of the Pendulum Concept Check • You need to know the height of a tower, but darkness obscures the ceiling. You note that a pendulum extending from the ceiling almost touches the floor and has a period of 24 s. How tall is the tower?

  17. Concept Check • 1.4 x 102 m

  18. Concept Check • You are designing a pendulum clock to have a period of 1.0 s. How long should the pendulum be?

  19. Concept Check • 25 cm

  20. Concept Check • A trapeze artist swings in simple harmonic motion with a period of 3.8 s. Calculate the length of the cable supporting the trapeze.

  21. Concept Check • 3.6 m

  22. Concept Check • Calculate the period and frequency of a 3.500 m long pendulum at the following locations: • The North Pole, where g=9.832 m/s2 • Chicago, where g = 9.802 m/s2 • Jakarta, Indonesia, where g=9.782 m/s2

  23. Concept Check • 3.749 s; 0.2667 Hz • 3.754 s; 0.2664 Hz • 3.758 s; 0.2661 Hz

  24. Simple Harmonic Motion of a Mass-Spring System • The period of a mass-spring system depends on the mass and the spring constant. • T= 2(m/k)

  25. Simple Harmonic Motion of a Mass-Spring System Concept Check A mass of 0.30 kg is attached to a spring and is set into vibration with a period of 0.24 s. What is the spring constant of the spring?

  26. Simple Harmonic Motion of a Mass-Spring System Concept Check 2.1 x 102 N/m

  27. Simple Harmonic Motion of a Mass-Spring System Concept Check • A spring of spring constant 30.0 N/m is attached to different masses, and the system is set in motion. Find the period and frequency of vibration for masses of the following magnitudes: • 2.3 kg • 15 g • 1.9 kg

  28. Simple Harmonic Motion, cont’d • 1.7 s, 0.59 Hz • 0.14 s, 7.1 Hz • 1.6 s, 0.69 Hz

  29. Properties of Waves Objectives Distinguish local particle vibrations from overall wave motion. Differentiate between pulse waves and periodic waves. Interpret waveforms of transverse and longitudinal waves. Apply the relationship among wave speed, frequency, and wavelength to solve problems. Relate amplitude and energy.

  30. Wave Motion A wave is the motion of a disturbance. The medium is the physical environment through which a wave travels. Waves that require a medium are called mechanical waves.

  31. Wave Speed Concept Check A piano emits frequencies that range from a low of about 28 Hz to a high of about 4200 Hz. Find the range of wavelengths in air attained by this instrument when the speed of sound in air is 340 m/s.

  32. Wave speed, cont’d 0.081 m to 12 m

  33. Wave speed concept check The red light emitted by a He-Ne laser has a wavelength of 633 nm in air and travels at 3.00 x 108 m/s. Find the frequency of the laser light.

  34. Wave speed, cont’d 4.74 x 1014 Hz

  35. Wave Interactions Objectives Apply the superposition principle Differentiate between constructive and destructive interference. Predict when a reflected wave will be inverted. Predict whether specific traveling waves will produce a standing wave. Identify nodes and antinodes of a standing wave.

  36. Interference Constructive interference occurs when the waves displacements occur in the same direction so the superposition of the two waves results in the addition of the amplitudes. Destructive interference occurs when the waves displacements occur in opposite directions so the superposition of the two waves results in the addition of the two amplitudes.

  37. Constructive and Destructive Interference

More Related