FUNDAMENTALS OF PIPELINE ENGINEERING

1. A Four Day Course on Organised by FUNDAMENTALS OF PIPELINE ENGINEERING In collaboration with 2 – 6 January 2006 | UTM City Campus, KUALA LUMPUR, Malaysia Kuala Lumpur Petroleum Academy Key Benefits At the end of this 4-day course, the participants will : • have an understanding of the pipeline structural analysis and design • gain a practical understanding of pipeline materials and corrosion problems and protection WHO SHOULD ATTEND The course is intended for engineers, inspectors and managers responsible for the design, integrity, inspection, maintenance and repair of pipelines INTRODUCTION • The course will provide a complete and up-to-date overview of the area of offshore pipeline engineering taking participants through the pre-design phase, design, construction, installation, operation and maintenance COURSE CONTENTS • DAY 1- Introduction to Offshore Engineering - Design Overview : Introduction to Offshore Pipeline Construction - Route Selection - Shore Approaches - Structural Design of Pipelines - On-Bottom Pipeline Stability - Hydraulics • DAY 2 - Pipeline Materials & Metallurgy - Increasing Corrosion Resistance - Corrosion and its Prevention - External Corrosion Protection with Coatings - Cathodic Protection Systems & Design - Design Exercise 1 • DAY 3 - Design Exercise 2 - Design Exercise 3 - Bundles & Pipe-in-Pipe - Trenching and Burial - Spans - Pipelaying - Welding - Insulation • DAY 4 - Risk and Pipeline Design - Development and application of Pipeline Codes - Pipeline Monitoring & Inspection - New Technology in Deep Water Developments - Upheaval & Lateral Buckling - Pipeline Failures & Repair - Precommisioning of New Pipelines

2. COURSEFACILITATORS Muhamad Hazlalin He has 12 years working experience in the field of design, procurement and installation of offshore and onshore oil and gas pipelines in Malaysia, Sudan, Vietnam, Myanmar, Thailand, Indonesia, Brunei and Abu Dhabi. He has worked for various design consultants, offshore installation contractors and even operator i.e ExxonMobil.Key design experience includes participation in basic, conceptual and detailed pipeline design projects for both onshore and offshore pipelines.Experience in integrity assessment of pipelines were obtained during involvement in EMEPMI’s low, medium and high risk studies on all existing EMEPMI pipelines and risers offshore Terengganu. Also involved in the procurement of line pipes, bends, flanges, pipeline and pipe fittings for EMEPMI offshore pipeline project. Offshore experience includes installation of pipelines and risers for PCSB’s Dulang and ANGSI Field Development Project on board Laybarges D B26 a and Kuroshio 1. Also involved in pipeline route survey on board TLGH & Racal Survey Vessel for Petronas and EMEPMI projects. Assoc. Prof. Dr. Nordin Yahaya Assoc. Prof. Dr. Nordin Yahaya is currently the Marketing + International Student Manager, School of Postgraduate Studies, Universiti Teknologi Malaysia. Dr. Nordin graduated with BE (Hons) in Civil Engineering from Salford University (1988), MSc. In Offshore Engineering from Cranfield University (1992) and PhD in Civil and Offshore Engineering from Heriot – Watt University, United Kingdom (1999). In 2000, he was awarded Young Graduates and Scientists Award by Volkswagen Foundation, Germany. He is currently doing his research on Pipeline Assessment and Structural Reliability sponsored by UTM and Federal Government Grants. He has presented many papers at international and national Conference in these areas of expertise. ||Appproved Training Provider by the Ministry of Human Resource (Reg. No 045) || Staff from more than300 local and overseas companieshave attended our life-long learning programmes. Some of these companies are : PETRONAS, SHELL, BP, SAUDI ARABIA BASIC IND. CORP. (SABIC), QATAR LNG, ALMARAI (SAUDI ARABIA), IDEMITSU, EASTMAN CHEMICALS, BASF PETRONAS, KUWAIT INSTITUTE for SCIENTIFIC RESEARCH,SUDAN REFINERY, YOZAI etc. (Fee is inclusive of lunch, refreshments and course materials) Course Fee Single 2 or more 2550 2350 2250 Local Participant (RM) International Participant (USD) REPLY FORM FUNDAMENTALS OF PIPELINE ENGINEERING 2 – 6 January 2006 UTM City Campus, Kuala Lumpur, MALAYSIA Method of Payments Please kindly complete and return the reply form together with : Local Participants • By cheque / Bank draft which are made payable to PHYTO BIZNET SDN BHD International Participants • By Direct Transfer/Bank Draft: CEPP Bank details: Bumiputra Commerce Bank Berhad Universiti Teknologi Malaysia 81310 UTM Skudai, Johor, Malaysia • Account No : 0118-0004178-05-7 • Please instruct your bank to remit us the full amount, net of bank charges Cancellation & Substitutions A full refund will be promptly made for all written cancellations 2 weeks before the meeting. 50% refund will be made for written cancellations received 7 days before the meeting. A substitute may be made at any time. Notea) The organiser has the right to make any amendments that they deem to be in the best interest of the course and to cancel the course if insufficient registrations are received a week before course commencements date . B) CERTIFICATE OF ATTENDANCE will be awarded at the end of the course. • Credit Transfer • This module carries equivalent credit for qualified engineers or scientists who wish to register under MSc. In Process Plant Management Programme. Terms and conditions apply. Contact Rohaizan at 07-5531559 or rohaizan@cepp.utm.my for further details YES ! I would like to register the following participants Name 1 Job Title Name 2 Job Title COMPANY INFORMATION Company Address Town State Tel AUTHORISED Signatory (*This registration is invalid without signature form an authorised officer) Name Job Title Tel _____________________________________________ _____________________________________________ _____________________________________________ _____________________________________________ _____________________________________________ _____________________________________________ _____________________________________________ _____________________________________________ _____________________________________________ _____________________________________________ Fax _____________________________________________ _____________________________________________ _____________________________________________ Fax ENQUIRIES http://www.cepp.utm.my CHEMICAL ENGINEERING PILOT PLANT,UNIVERSITI TEKNOLOGI MALAYSIA BRANCH OFFICE MAIN OFFICE Jalan Semarak, 54100 Kuala Lumpur Tel : +603-2615 4358 / 2615 4406 Fax : +603-26937921 Attn: Mrs Nik Norhayati E-mail : nikyati@utmkl.utm.my 81310 UTM Skudai, Johor Tel : +607-5531565 Fax : +607 - 5569706 Attn: Mrs Zulia E-mail : zulia@cepp.utm.my