1 / 9

Components

Components. Fundamentals. Active Components (cont). Comparator if V2 > V1 the output is driven to the positive supply voltage and if V2 < V1 it is driven to the negative supply voltage. Active Components (Cont). Oscillators Devices producing a periodic signal

jgoings
Download Presentation

Components

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Components Fundamentals

  2. Active Components (cont) • Comparator • if V2 > V1 the output is driven to the positive supply voltage and if V2 < V1 it is driven to the negative supply voltage. LM-18 Computer Science SSI Embedded Systems I

  3. Active Components (Cont) • Oscillators • Devices producing a periodic signal • Digital Electronics use “square wave” oscillators • Flip Flop based • Schmitt trigger (follow this link) LM-18 Computer Science SSI Embedded Systems I

  4. Active Components (cont) • Summing Amplifier • For the summing amplifier by the current rule the non-inverting input is a virtual ground. Then the current into A must be zero. This requiresV1/R1 + V2/R2 = - Vout/R3but R1=R3=R3thenVout=-(V1+V2) LM-18 Computer Science SSI Embedded Systems I

  5. Active Components (cont) • Flip Flop"Flip-flop" is the common name given to two-state devices which offer basic memory for sequential logic operations. Flip-flops are heavily used for digital data storage and transfer and are commonly used in banks called "registers" for the storage of binary numerical data. LM-18 Computer Science SSI Embedded Systems I

  6. Active Components (cont) • CountersA binary counter can be constructed from J-K flip-flops by taking the output of one cell to the clock input of the next. The J and K inputs of each flip-flop are set to 1 to produce a toggle at each cycle of the clock input. For each two toggles of the first cell, a toggle is produced in the second cell, and so on down to the fourth cell.  LM-18 Computer Science SSI Embedded Systems I

  7. Active Components (cont) • 12 bit summing amplifier computing LM-18 Computer Science SSI Embedded Systems I

  8. Active Components (cont) • Summing Amplifier DAC • Limits • Precision depend from resistor tolerance • Precision influenced from final impedance Vout-Ground • Temperature • Solved by IC with more complex circuits & Embedded Systems boards perform DAC operation, interfacing DAC IC • Further info (Hyper Physics Site) • DAC IC panoramic (Texas Instruments Site) LM-18 Computer Science SSI Embedded Systems I

  9. Active Components (cont) • Analog to Digital Converter (ADC) • Digital Ramp ADC • Conversion from analog to digital form inherently involves comparator action where the value of the analog voltage at some point in time is compared with some standard. A common way to do that is to apply the analog voltage to one terminal of a comparator and trigger a binary counter which drives a DAC. The output of the DAC is applied to the other terminal of the comparator. Since the output of the DAC is increasing with the counter, it will trigger the comparator at some point when its voltage exceeds the analog input. The transition of the comparator stops the binary counter, which at that point holds the digital value corresponding to the analog voltage. LM-18 Computer Science SSI Embedded Systems I

More Related