1 / 9

Designer ： Mr. Wang Updated: 2018/03/04 Date ： 2018/03/03

FLECONN -14 PIN 3.0mm PITCH CONNECTOR Overmolded Cable Assemblies DESIGN PRESENTATION 富莱科－ 14P 3.0mm 间距连接器 Molded Cable Assemblies 设计陈述. Designer ： Mr. Wang Updated: 2018/03/04 Date ： 2018/03/03. 14 PIN 3.0mm PITCH CONNECTOR_OVER VIEW 14 PIN 3.0mm PITCH 连接器 _ 概述.

jmascarenas
Download Presentation

Designer ： Mr. Wang Updated: 2018/03/04 Date ： 2018/03/03

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FLECONN -14 PIN 3.0mm PITCH CONNECTOR Overmolded Cable Assemblies DESIGN PRESENTATION富莱科－14P3.0mm 间距连接器Molded Cable Assemblies设计陈述 Designer：Mr. Wang Updated: 2018/03/04 Date：2018/03/03

  2. 14 PIN 3.0mm PITCH CONNECTOR_OVER VIEW14 PIN 3.0mm PITCH 连接器_概述 14 PIN 3.0mm PITCH CONNECTOR design project is developing over mold connector base on Molex existing housing 430251400 and terminal 430300001to mate Molex existing pin connector 430201400. The connector is fitting with UL2464 14*24AWG cable, the insulation OD is Ø1.18mm, and cable OD is 7.2mm. 14 PIN 3.0mm PITCH CONNECTOR设计项目是基于MOLEX现在胶壳430251400和端子430300001设计包胶注塑连接器来匹配MOLEX现有连接器430201400。此连接器与UL2464 14*24AWG电线实配，电线芯线OD 1.18mm, 外径7.2mm。

  3. 14 PIN 3.0mm PITCH CONNECTOR_OVER VIEW14 PIN 3.0mm PITCH 连接器_概述 The connector overall size as shown. 此连接器的总体尺寸如图所示。

  4. 14 PIN 3.0mm PITCH CONNECTOR_OVER VIEW14 PIN 3.0mm PITCH 连接器_概述 1 2 3 4 5

  5. 14 PIN 3.0mm PITCH CONNECTOR_FLOW CHART14 PIN 3.0mm PITCH 连接器_流程图 打端 Cut cable per requirement Jacket and insulation stripping Crimping terminal with cable Components incoming inspection 裁线 剥外被和芯线 来料检查 Final inspection Packing Inner Mold injection Over mold injection 外模成型 终检 包装 内模成型

  6. 14 PIN 3.0mm PITCH CONNECTOR _ STRUCTURE DESCRIPTION14 PIN 3.0mm PITCH 连接器_结构描述 Stripping the jacket 28.0±1.0mm Stripping the insulation 3.0 ±0.5mm 剥外被： 28.0±1.0mm 剥芯线：3.0±0.5mm Crimping strength: 22.2N Minimum. 压接保持力：22.2 N 最小

  7. 14 PIN 3.0mm PITCH CONNECTOR _ STRUCTURE DESCRIPTION14 PIN 3.0mm PITCH 连接器_结构描述

  8. 14 PIN 3.0mm PITCH CONNECTOR _ STRUCTURE DESCRIPTION14 PIN 3.0mm PITCH 连接器_结构描述

  9. 14 PIN 3.0mm PITCH CONNECTOR 14 PIN 3.0mm PITCH 连接器 Thanks Questions

More Related