1 / 21

epoc Veterinary Software Dave McComas

epoc Veterinary Software Dave McComas. Vet Software Released in Two Phases Phase I Due for release 1 st April 2011 “epoc Veterinary analyser” bottom right corner of login page. “epoc Vet” top left corner of the screen.

jnino
Download Presentation

epoc Veterinary Software Dave McComas

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. epoc Veterinary Software Dave McComas

  2. Vet Software Released in Two Phases Phase I Due for release 1st April 2011 “epoc Veterinary analyser” bottom right corner of login page

  3. “epoc Vet” top left corner of the screen

  4. “Dog Arterial”, “Dog Venous”, “Cat Arterial”, “Cat Venous”, “Horse Arterial”, “Horse Venous” and “Other” species as sample types

  5. We will remove the “Select tests to perform” tab when running tests

  6. Default animal ranges in administrator

  7. Vet card exclusion: Vet cards will only work with Vet sw and will not work with human software and vice versa Specific vet card lots produced

  8. Phase II ?Phase II Modifiable species

  9. Species on first screen

  10. Ventilator settings vet specific

  11. Phasing-in New Software & Cards Any card lot built before May 1st, 2011 will be accepted by the new Vet software If a customer still has old cards after they upgrade, they will still work Card lots built after May 1st will be vet specific card lots NOTE – the new vet cards will not work in the old software – so cards built after May 1st require the vet software

  12. How to Upgrade SD Card Host to Host EDM

  13. SD Card Upgrade When upgrade due WVD will email distributors: - Upgrade file - Update note - Instructions

  14. 1. Delete all files from SD Card 2. Save the Host software upgrade file (filename: “upgrade”) to SD card 3. Turn OFF the epoc Host 4. Loosen screws on back of Host 5. Slide the scanner bracket forward and up to release the barcode scanner 6. Remove barcode scanner 7. Remove Host from cradle

  15. 8. Insert the SD card into the Host’s SD Slot 9. Turn ON the Host 10. Log into the Host as administrator User Id: administrator Password: administrator 11. Select ‘Tools>Perform Upgrade>From SD Card’ & ‘Yes’

  16. 12. Verify correct software installed 13. Remove SD card 14. Re-assemble Host Firmware On occasions firmware upgrade (reader) also required Upgrade firmware using upgraded Host Log on as administrator, tap reader icon, select ‘configure’

  17. Host to Host upgrade Host #1 contains the newest version software Host #2 contains requires upgrading 1. Turn ON the Hosts 2. Log onto Host #2 as administrator User Id: administrator Password: administrator 3. On Host #2 select Tools>Perform Upgrade>From Host

  18. 4. Host #2 searches for other Hosts 5. Find and tap Host #1 6. Select upgrade from Host

  19. Upgrade using EDM Save upgrade file to disc Select epoc System>Host settings>Software update, select file, then verify & accept

  20. 3. Synch Host to EDM 4. Log on as administrator 5. Select Tools>Perform Upgrade>From EDM 6. Update complete

  21. Thank you Questions?

More Related