1 / 15

Modelsim SE 6.1 軟體介紹

Modelsim SE 6.1 軟體介紹. Modelsim SE 6.1 使用. 點選左圖，開 啟 Modelsim 程式，如下圖. Modelsim 模擬使用. 此 project 最好放在與 project 同名的資料夾裡。. 首先建立一個 Project ：. 建立一個 Project 後 ， 指定的路徑下會產生一個叫 “ work” 的預設子資料夾，還有 Projectname.mti 、 Projectname.mpf 兩個檔案

joelle-gomez
Download Presentation

Modelsim SE 6.1 軟體介紹

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Modelsim SE 6.1軟體介紹

  2. Modelsim SE 6.1使用 點選左圖，開啟Modelsim程式，如下圖

  3. Modelsim模擬使用 此project最好放在與project同名的資料夾裡。 • 首先建立一個Project：

  4. 建立一個Project後，指定的路徑下會產生一個叫“work”的預設子資料夾，還有Projectname.mti、Projectname.mpf兩個檔案建立一個Project後，指定的路徑下會產生一個叫“work”的預設子資料夾，還有Projectname.mti、Projectname.mpf兩個檔案 • mpf 檔儲存的是此Project的相關資料，下次要開啟此Project就是利用 File \ Open \ Project...開啟此.mpf

  5. 開啟project後，加入物件到project中： Note：較常用的為 Create New File與 Add Existing File

  6. 134.208.2.151 port 4039 • modelsim / modelsim

More Related