1 / 14

TCP over ATM

Explore the mapping of TCP over ATM and analyze its performance over UBR and ABR. Understand the challenges and solutions for running TCP over ATM, including packet discard strategies. Learn about ABR flow control and its impact on TCP performance and fairness.

johnsonb
Download Presentation

TCP over ATM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TCP over ATM Dr. Abdulaziz Almulhem

  2. Agenda • TCP over ATM • Possible mapping (UBR/ABR) • Performance over UBR • Performance over ABR 2

  3. TCP over ATM • TCP is very popular • ATM provides WAN connectivity for high speed networking 3

  4. Protocol Mapping • TCP • IP • AAL5: mapping higher layer PDUs into ATM cells • Convergence Sublayer (CS): services to higher layers • Segmentation & Reassembly Sublayer (SAR): packing and unpacking of data • ATM 4

  5. 5

  6. TCP over UBR • Problem of running TCP over ATM • TCP segments are packed into ATM cells • Overhead • If a cell is lost, segment is useless • Resource waste • Undesirable delays • Segment size impacts the throughput • Lager segments tolerate more to discard 6

  7. Packet Discard • To increase throughput, ATM switch buffer sizes can be increased (?) • Alternatively, ATM switches can be smart and reduce waste via discard strategies: • Partial Packet Discard (PPD) • Early Packet Discard (EPD) 7

  8. PPD • If a cell belonging to a packet is dropped, subsequent cells are also dropped • The last cell is not dropped since it designates the end of packet and should be carried all the way to destination • Still, there is some waste! 8

  9. EPD • Instead of buffering partial packets, a packet size is checked before it is accepted • If the packet size is less than the remaining buffer capacity, then accept • However if the packet size is larger than free buffer, packet is dropped. 9

  10. 10

  11. TCP over ABR • ABR provides flow control • TCP can utilize this control • ABR will increase throughput and maximize utilization • Also ABR maximizes fairness and sharing. 11

  12. ABR Flow Control • Two modes: • Binary mode: a switch indicates a congestion where a source has to change its rate up/down incrementally. • Explicit rate mode: a switch will run an algorithm to find the rate at which the source should send data. 12

  13. TCP over ABR, again… • Two modes of operation: • Window-limited mode: ABR will provide the maximum possible rate a source can transmit with. However TCP will slowly start and congestion window will grow to use all rate. • Rate-limited mode: once congestion occurs, rate will be limited and TCP acks rate will be reduced that will reduce the rate at which TCP source sends segments. 13

  14. Performance • ABR is very sensitive to parameters which in turn will affect performance and fairness • ABR could be comparable to UBR • ABR needs smaller buffer sizes from the switches to guarantee higher throughput than UBR which requires buffering proportional to number of TCP connections 14

More Related