1 / 9

Rogowski Design Sensitivity Tests

Rogowski Design Sensitivity Tests. Stefan Gerhardt, Larry Guttadora. Formulas For the Ideal Rogowski. Basic Formula. For Sinusoidal Variation. Figure of Merit should be: Independent of Frequency Purely Determined by Geometry. As Built. a=30 turns/inch=1181turns/m

johnwalden
Download Presentation

Rogowski Design Sensitivity Tests

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rogowski Design Sensitivity Tests Stefan Gerhardt, Larry Guttadora

  2. Formulas For the Ideal Rogowski Basic Formula For Sinusoidal Variation Figure of Merit should be: Independent of Frequency Purely Determined by Geometry As Built a=30 turns/inch=1181turns/m A=(/4)(5/16”+.033)2= (/4)(.0087)2=5.9x10-5 m2 Figure of Merit: 5.6x10-7 V/A/Hz nA0=8.8x10-8 (Vsec/A)

  3. Test Jig #1 Ends close to closed, but not perfect here 10 Turns Linked By Rogowski Current Measured by Pearson Coil

  4. Test Jig #2 100 Turns Linked By Rogowski Current Measured by Pearson Coil

  5. Figure of Merit: Jig #1 Error Bars Large Due to Small Output Voltage at low frequency, Consistent with flat response. Blue and Black for two different scans Ideal value Rolls off above 10kHz

  6. Same For Jig #2

  7. Combined Results • Good agreement with expected sensitivity • Flat response from 40 to 10000 Hz • Vacuum vessel cuts off above 1kHz. (?)

  8. Example of Signal Levels in NCSX 200kA plasma, want to accurately measure 1% of that Need to accurately resolve 2000 Amps Assume (for concreteness) the same hardware as NSTX Rogowskis * Integrator: selectable RC values of 1 to 100 msec (7 increments) * Digitizer: 12 bits, 5V, 2.5mV bit noise Pick RC so that 300kA5V How Big is 1 Bit?

  9. Conclusion Design is Sound From the “Physics” Perspective

More Related