1 / 9

A1 / A2 Fit-up Test

A1 / A2 Fit-up Test. T. Brown / A. Brooks. A1-A2 fit-up shims.ppt. 3/30/07. The test shim geometry is based on Gary McGinnis shape and general layout. A1 metrology data. A2 metrology data. Flange edge data. Flange surface data.

jovita
Download Presentation

A1 / A2 Fit-up Test

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A1 / A2 Fit-up Test T. Brown / A. Brooks A1-A2 fit-up shims.ppt 3/30/07

  2. The test shim geometry is based on Gary McGinnis shape and general layout.

  3. A1 metrology data A2 metrology data Flange edge data Flange surface data Edge data was taken on side-A of A1 modular coil whereas surface data and edge data was taken on side-A of A2.

  4. Chart shows the surface variation on A2 for points taken on the flange edge.

  5. A2 Side A shim surface condition Metrology points defined over shim area. A1/A2 fit-up shim locations – A2 metrology point data

  6. Shim-2 Shim-1 Shim-3 A2 Side A shim surface condition

  7. A1 Side A shim surface condition Metrology points defined over shim area. A1/A2 fit-up shim locations – A1 metrology point data

  8. A1 Side A shim surface condition Shim-2 Shim-1 Shim-3

  9. Final shim sized after Art’s realignment

More Related