ASE MISSION natef

1. ASE MISSION www.natef.org To improve the quality of vehicle repair and service through testing and certification.

2. 2010 is here! 2011 will bring more changes Nobody likes change but wet babies

3. Program Certification Process Recom- mendation for Certification Program Self Evaluation On-Site Evaluation NATEF Review ASE Certification (5 years)

4. Transportation PROGRAMCERTIFICATION • Automobile(includes optional CNG, LPG) • Collision Repair & Refinish • Medium/Heavy Truck (includes optional CNG, LNG, LPG)

5. 6. Instruction 7.Equipment 8. Facilities 9. Instructional Staff 10. Cooperative Agreements 11. Elearning Program Standards • Purpose • Administration • Learning Resources • Finances • Student Services

6. Five Point Rating Scale 5 Exceptional; Above Average 4 Average; Adequate 3 Somewhat; Needs Improvement 2 Very little 1 Not at all

7. Rating Standards154Documentation!Documentation!Documentation!

8. Standard 2.5; An Advisory Committee consisting of at least five (5) members must convene at least two times a year and be utilized to provide counsel, assistance, and information from the community served by the training program. This committee should be broadly based and include former students, employed technicians, employers, and representatives for consumers’ interest. Go-No-Go Standard 2.5 Stds 2.3 D&E, 4.2A, 5.5E, 6.4A, 6.5C, 6.7 B, 6.14 F, 7.5B And Advisory tour of facility Std 8.11 Should be discussed and recorded in the minutes Std 11 new!

9. Std. 2.5 Business and Industry Council Tom Richardson says “It is all about relationships!” Advisory meetings should be face to face, working meetings. Short and to the point. Do not waste their time!

10. Business and Education Council • https://autoteacher.net/AYES_Page.php Information on requirements for an advisory How to develop and maintain an advisory Watch an Advisory meeting

11. Std. 2.5 Local business representatives Local business representatives Counselors, Administrators Parents Owners and service managers

12. GO / NO - GO ITEMS • Standard 5.5 F The Advisory Committee must review information from annual follow-up procedure and provide input for modifications to the program.

13. 6.15 Live work https://autoteacher.net/NATEF

15. All students will receive instruction in the storage, handling, and use of Hazardous Materials as required in Hazard Communication Title 29, Code of Federal Regulation Part 1910.1200, ‘Right to Know Law’, and state and local requirements; Std 6.8 Std. 6.5 D 1, 2 Hazardous and toxic materials will be handled, removed and recycled or disposed of according to federal, state, and local regulations. www.sp2.org

17. Hands on Performance Evaluation training programs being evaluated for certification should have written and detailed performance standards for each task covered and taught in the curriculum; Validates the Program Hands on Performance Evaluation Std 6.7 Hands on Competency Std 6.7, A,B,C Std. 6.13 Validates the Program

18. Std. 7.1A Go-No Go Equipment Safety Std. 8.2A Safety Signage Std.6.8D Shop Safety Std 8.2 G Traffic lanes Bolt down equipment

19. GO / NO - GO ITEMS Standard 6.5 A (Collision) 95% of HP-I tasks 90% of HP-G tasks must be in curriculum

20. GO / NO - GO ITEMS Standard 6.5 A (Auto) 95% of P1 tasks 80% of P2 tasks 50% of P3 tasks must be in curriculum GST must teach 100% of tasks

21. The student has received the necessary training to locate and use current reference and training materials from accepted industry publications and resources. Std 6.5 , 5&6

22. www.natef.org • https://autoteacher.net/NATEF__Teacher_Helps.html • E Learning • http://www.natef.org/documents/natefe-learningq&a.pdf

23. Std 6.13 Testingboth written and performance based http://www.gactaern.org/curri http://www.na3sa.com/

24. Your first impression is important!

28. GO / NO - GO ITEMS • Standard 7.1 B Safety glasses must be worn by all students, instructors, and visitors in the lab/shop area while lab is in session.

30. Std 6.9 A 5,6 Personal Habits, 6.10 Work Habits

31. 8.6 A Separate classroom Std 6.8 D and 7.1 B Safety Glasses must be worn if any work is being done in shop/lab

32. GO / NO - GO ITEMS • Standard 7.1 A All shields, guards, and safety devices must be in place, operable, and used. Note: A go-no-go std will cause the program not to be certified no matter how good the rest of the evaluation is.

33. 7.1 A Go-No Go Safety! 7.1 B Safety Glasses 8.4 Orderly workplace/lab

34. Std 7.2 Tools & Equipment must meet program goals

35. Std. 7.2 A,B,C Std 7.8 A,B,C Hand tools Quality&Quantity

37. Std 6.4 teaching load and contact hours Std 2.4 liability Std 8.2 Safety of the facility

38. Std 6.5 OSHA, EPA, and Safety Std 8.4, 8.1, 8.2

39. 8.2 C Power cut 8.2, B Fire Extinguishers

40. 8.7 Storage

44. Std 8.9, 8.2 Exhaust

45. Std 8.4, Std. 8.10 A,B,C Std. 8.2 B First Aid Housekeeping Honda Factory Training Center

46. Go-No-go Std. 9 Instructors required to attend at least 20 hours/year of recognized industry training relevant to the areas in which the program is certified. Std.2.3 A, Can you go? Std.9.3 B, Do you go? Documentation of attendance required.

47. Internships Std. 10 17 yr old @ local Dealership Student Apprenticeships Summer internships Std. 10.1A, 10.2A, 10.3A

48. Send to ETL At least two weeks prior to on-site: • Application for On-site Evaluation • Course of Study • On-site Team Member List • Advisory Committee List • Arrangements for the visit