1 / 15

Detailed analysis of quasi- ohmic contacts to high resistive GaAs:Cr structures

This study investigates the behavior of quasi-ohmic contacts to GaAs:Cr structures and estimates certain material parameters. The analysis provides a comprehensive understanding of the material and allows for the estimation of n0, Nt, and Et. The results show good agreement between different analyzing methods of I-V curves.

julieharden
Download Presentation

Detailed analysis of quasi- ohmic contacts to high resistive GaAs:Cr structures

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Detailed analysis of quasi-ohmic contacts to high resistive GaAs:Cr structures A. Lozinskaya, I. Chsherbakov, V. Novikov, O. Tolbanov, A. Tyazhev, A. Zarubin R&D center “Advanced Electronic Technologies” (Functional electronics laboratory) 11th July 2019, Kolympari, Chania, Crete, Greece

  2. Investigate behavior of ohmiccontacts to GaAs:Cr structure • Estimate some parameters of the material Motivation GaAs:Cr wafers of 3`` and 4`` diameter made in Tomsk, Russia • Sensor production • Material testing • and characterization

  3. Resistivity: ~109Ohm×cm Contact’s material: Ni (5nm)/AuGe (150nm)/ Ni (20 nm)/Au (100 nm) Thickness: 250 /500/ 750/ 1000 µm Active area size: ~3×3 mm2 Tested samples GaAs:Cr Top contact 250 500 750 1000 Back contact

  4. Investigated temperature range: 15 - 60°C Accuracy ~ 0,1°C Forward & reverse bias Test conditions Sample Thermostatic oven Voltage control & measurement Current measurement

  5. I-V curves 15°C 25°C 40°C 60°C

  6. Can be Space Charge Limited Current? 60°C (1) Yes, it’s SCLC If U = const,

  7. Space Charge Limited Current [1] Peter, S., 2009. Electrical Characterization of Organic Electronic Materials and Devices, John Wiley and Sons, Ltd., New Jersey, USA.

  8. Space Charge Limited Current IV UT = 0,89 V UTFL = 4,72 V UIV region = 2 UTFL ~10V III II I (2) θ – trap factor I-V characteristic for 250 µm samples @15°C

  9. GaAs:Cr parameters calculation µ0 = 2500 cm2V-1s-1 IV region (m~1,6): ε=ε0εGaAs εGaAs = 13 vsat= 2×107 cm/s θ = 0,29×10-3 I-II region, Ohm-SCLC transition point: n0 = 2,2×106 cm-3 Nt = 1,08×1011 cm-3 III region (m~4): Et-Ec = 0,56 eV

  10. Activation energy Et-Ec=0,56 ±0,08 eV Richardson plot of samples with 500 µm thickness @ 25°C

  11. GaAs:Cr structures with AuGe contacts are described by SCLC transport mechanism; The analysis of structures with quasi-ohmic contacts gives full understanding of material parameters and allows to estimate n0, Ntand Et; Good agreement of the results, obtained by different analyzing methods of I-V curves. Conclusion

  12. Thank you for your attention!Questions? The work was financially supported with grants of RSF # 18-44-06001 (TSU, Russia) and HRSF-0004 (DESY, Germany).

  13. GaAs:Cr parameters calculation Data from Hall measurements Data from IV analysis θ = 6,57×10-5 n0 = 5,03×105 cm-3

More Related