1 / 58

Herakles Dishwasher

Herakles Dishwasher. CONTENT.  Energy label  The dishwasher - Dishwasher advantages - General principles  Water and detergents.  HERAKLES features - Programmings - Installation and use - Filling, regeneration, drying - Diagram

justine-noel
Download Presentation

Herakles Dishwasher

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HeraklesDishwasher

  2. CONTENT  Energy label  The dishwasher - Dishwasher advantages - General principles  Water and detergents  HERAKLES features - Programmings - Installation and use - Filling, regeneration, drying - Diagram - Test program

  3. ENERGY LABEL HERAKLES A / A / A - B - C

  4. ENERGY LABEL Consumption level of the main appliances Dryer (150 uses) Electric hob Dishwasher(220 uses) Chest freezer Electrical oven Washing machine (200 uses) Refrigerator Television Microwave oven 800W Iron Vacuum cleaner

  5. ENERGY LABEL Using costs HERAKLES vs HAND WASH

  6. ENERGY A Temperaturereduction Water quantityreduction • Washing • Alterned spraying • Expertise of the shapes • Filling precision For washing and drying good results Strenghten • Washing duration • Last rinse temperature • Kind and/or duration of the drying A A A

  7. 0 à 8°TH 9 à 17°TH 18 à 26°TH 27 à 35°TH 36 à 44°TH > à 45°TH WATER HARDNESS MEASURE Measure with precision After sales service Approximate hardness Installation 100 test box : 43X97823 tests : 43X9783 Little box : 74X0826 Big box : 31X4037

  8. WATER NEGATIVE EFFECTS Too soft water : Too hard water : - AggressiveEspecially for the glasses - Washing efficiency reduced - White traces - Limestone in the machine

  9. WATER TREATMENT Demineralization partial or full Softening Carbonate reduction

  10. SOFTENING and REGENERATION SOFTENING Filter Softened water+Sodium Water + limestone

  11. SOFTENING and REGENERATION SATURATION Water + Limestone Filter saturatedby limestone

  12. SOFTENING and REGENERATION REGENERATION Filter Salt Water + Limestone+Sodium Water SALT Water+Sodium

  13. WATER PH pH < à 7 Acid pH = 7 Neutral pH > à 7 Alkaline pH tape roller43X9780 100 pH tapes box 43X9781

  14. Sel DISHWASHER’S PRODUCTS • Detergent- Tablets 2 or 3 in 1- Standard tablets- Powders normal or concentrated- Liquid normal or concentrated- Concentrated liquid dose • Rinse liquid • Salt • Other products-Cleaner / détartrants -deodorizing -Glass protector

  15. E1 PROGRAMMING • Control board with multiple leds display • - Push button and micro-switches (On/Off - Start/Cancellation – Delayed start) • - Program selector (Intensive - Normal - OptiA 60’ - Bio - Flash 30’ - Wetting) • - Indicators (Salt – Rinse product - Alarm – Locked control - 3 in 1 • Delayed start – Washing duration) • Main features • - A / A / B (condenser) • - 16 liters • - 50 dB(A)

  16. E2 PROGRAMMING • Carte d’accès avec afficheur 3 digits • - Push button and micro-switches (On/Off - Start/Cancellation – Delayed start – Aquaclean) • - Program selector (Intensive - Normal - OptiA 60’ - AUTO - Eco – Bio - Flash 30’ - Wetting) • - Voyants (Salt – Rinse product - Alerts - Locked control - 3 in 1- Delayed start - Time) • Main features • - A / A / A (Fan) • - 14 liters • - 47 dB(A)

  17. E4 PROGRAMMING • Control board with LCD screen • - Push button,, microswitches and capacitive keys (On/Off - Start/Cancellation Delayed start - Aquaclean) • - Program selector (Cyclone - Normal - OptiA 60’ - AUTO - Eco - Bio • Flash 30’ - Wetting) • - Indicators (Salt – Rinse product - 3 in 1 – Delayed start) • - Pictogrammes (cycle indicator – Locked control - Alerts – Differed end) • Main features • - A / A / A (fan) • - 12 liters • - 45 dB(A)

  18. INSTALLATION Water hardness control 100 tests box : 43X97823 tests : 43X9783

  19. INSTALLATION Salt • NO SALT IS NECESSARY IF :- The water hardness is under 10°TH- If 3-in-1 tablets are used and if water hardness < 40°TH

  20. USE Filling and adjustment of the rinse product distributor

  21. USE How to suppress the SALT and RINSE PRODUCT detectors • NO SALT IS NECESSARY IF :- The water hardness is under 10°TH- If 3-in-1 tablets are used and if water hardness < 40°TH • NO RINSE PRODUCT IS NECESSARY IF :- If 3-in-1 tablets are used and if water hardness < 40°TH

  22. USE « Setting » mode on E4 programming • 1 long press on « AQUALYSE » • Set the dishwasher • 1 short press on « AQUALYSE » • Time • Water hardness • Salt and rinse indicators • ‘Bip’ of end • Screen luminosity

  23. USE Filters cleaning

  24. USE On E1 programming, it’s possible to select a delayed start of 3, 6 or 9 hours Delayed start Delayed start On E2 programming, it’s possible to select a delayed start adjustable between 1 and 12 hours On E4 programming, it’s possible to select a ‘End of washing’ time using the + and – keys Delayed Start or End

  25. USE Possible programs

  26. THE COMPONENTS Filling AQUASTOP- Mechanical- Electric

  27. THE COMPONENTS Filling EV1Filling EV1 + EV2 (for condensor)

  28. THE COMPONENTS Filling

  29. FILLING Cycling pump Filter Power board Floater Heater Switch 1- Draining (N0) The floater is on the bottom and the switch is open

  30. FILLING Cycling pump Filter Time Power board Floater Heater Switch 2- Static filling  N1 Level 1 is reached  the contact switches on

  31. FILLING Level 1 control Easy to check during the test program

  32. FILLING 3- Additional filling 1 Calculatedtime Cycling pump Filter Power board Floater Heater Switch Calculation and chronometric static filling

  33. FILLING Cycling pump Filter Power board Floater Heater Switch Dynamic filling with measurement of the pump intensity Measured current 4- Additional filling 2

  34. FILLING 5- Water adjustment Cycling pump Filter Power board Floater Heater Switch Pump intensity is measured during 5’ Measured current

  35. DIRT DETECTION Pump current analysis during cycle Cycling pump Filter Power board Floater Heater Switch 1 cold rinse more if foam due to the dirt modifies the cycling. Measured current

  36. LITTLE TECHNICAL BOX(A A B or C) AirBreak Fillingregeneration water The filling Regeneration area Air inlets-Tank- Outside Hydraulicunit Filter Filter EV1

  37. LITTLE TECHNICAL BOX(A A B or C) The regeneration Regeneration area Salt

  38. DRYING General principles and components • Natural drying - With EL « xxC » EV2+Condenserintegrated in the tank • Condenser drying - With EL « xxB »

  39. Air break BIG TECHNICAL BOX (A A A) Water accumulatorfor drying Filling of the regeneration area The FillingOutsideview reinforcement Regeneration accumulator Water purge Unit F F EV1

  40. Air break BIG TECHNICAL BOX (A A A) Water accumulatorfor drying Filling of the regeneration area The fillingInside view Regeneration accumulator Air inlets-Tank- Outside Water purge Unit F F EV1

  41. DRYING General principle and components • Ventilateddrying to reach « xxA » Fan+Big technical box

  42. Fan Tunnel between fan & box Tank Pump Hydaulic unit VENTILATED DRYING

  43. Water accumulatorfor drying Regeneration accumulator Reinforcement Water purge BIG TECHNICAL BOX (A A A) The dryingOutside view

  44. Air inlet BIG TECHNICAL BOX (A A A) Water accumulatorfor drying The drying Inside view Regeneration accumulator Condensing areaAir / Water Air flow- To the tank- Vers l’extérieur Water purge

  45. BIG TECHNICAL BOX (A A A) The regenerationOutside view Regeneration accumulator Water purge Salt

  46. THE COMPONENTS The regeneration FIlter Regenerationvalve (EVR)

  47. Possible starts of the regeneration Prewash wash Cold rinse Cold rinse+ Hot rinse Drying THE REGENERATION • Regeneration electronically managed • Depends on the number of fillings and the setting Reduction of the water and salt consumption

  48. THE COMPONENTS Cycling pump Asynchronous motor

  49. SPRAYING Simultaneous :- Fixed disc From pump Upper spray arm Lower spay arm Alternated :- micro-motor- Turning disc

  50. THE COMPONENTS The filters • Across the pump inlet • 100% efficient • 4 filtering levels : - Main inox filter - Big dirts filter - Nylon micro-filter • Easy to dismount

More Related