ESD Seminar (3v0) (training APAC)

1. ESD Seminar (3v0)(training APAC) Jos van de Giesen Product Field Quality Manager APAC (ESD Coordinator) BU Mobile & Personal

2. ESD ITEMS: • ESD GENERAL • ESD TESTING (Destructive) • ESD HANDLING • ESD PACKING • ESD STANDARDS • ESD CONTROL • Questions

3. ESD ITEMS: • ESD GENERAL • ESD TESTING (Destructive) • ESD HANDLING • ESD PACKING • ESD STANDARDS • ESD CONTROL

4. RELATION ESD <> EMC PRODUCT MACHINE EMC ESD

5. STATIC GENERATIONVOLTAGE GENERATED AT R.H.: Above 3000V you can feel the dis-charge. All Semiconductor devices are ESD-Sensitive

6. ESD COSTImpact on Electronics • Device cost : $ 2-4 • Sub assembly : $ 10-15 • Finished product : $ 40 + • Field service : $ 300 +

7. ESD: Types of Failure: • Catastrophic Failure: Device does not meet designed performance standards. • Latent Failure: Device meets designed performance standards, but fails before end of designed life.

8. SEPARATE MATERIALS CHARGE DISTRIBUTION OF TWO UNLIKE MATERIALS BEING SEPARATED

9. SEPARATE MATERIALSSCOTCH TAPE

10. ESD ITEMS: • ESD GENERAL • ESD TESTING (Destructive) • ESD HANDLING • ESD PACKING • ESD STANDARDS • ESD CONTROL

11. ESD TESTING • HUMAN BODY MODEL (HBM) • direct discharge to device. • MACHINE MODEL (MM) • direct discharge between device & small conductive machine parts. • CHARGED DEVICE MODEL (CDM) • grounding a charged device. • FIELD INDUCTION MODEL (FIM) • grounding device in electrostatic field. • ESD ZAP (Mobile phones, 8kV) • Discharge through antenna or at outside of phone

12. ESD ITEMS: • ESD GENERAL • ESD TESTING (Destructive) • ESD HANDLING • ESD PACKING • ESD STANDARDS • ESD CONTROL

13. ESD HANDLINGESD Protected Area (EPA)

14. ATTENTION ESD PROTECTED AREA OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES ESD HANDLINGExample of EPA sign

15. ESD HANDLINGESD Protected Area (EPA) : • a Bench. • a Store. • an area of work. • a field work area • a work station and equipment (e.g. solder flow machine)

16. ESD HANDLINGMINIMUM REQUIREMENT • Use of Wrist strap. • Table dissipative. • Tools ESD safe. • Packing ESD safe. • Training. • Audits.

17. ESD ITEMS: • ESD GENERAL • ESD TESTING (Destructive) • ESD HANDLING • ESD PACKING • ESD STANDARDS • ESD CONTROL

18. ESD PACKING • MATERIALS: - Antistatic materials. - Materials with resistivity properties. • Electrostatic shielding materials. • Electrostatic conductive materials. • Electrostatic dissipative materials. • Insulative materials.

19. ESD PACKINGMATERIALS FOR PACKING • INTIMATE PACKING: • makes direct contact with ESDS. • PROXIMITY PACKING: • not making contact with ESDS, but is used to enclose one of more devices. • SECONDARY PACKING: • additional protection on the outside of proximity

20. ESD PACKINGMATERIALS FOR PACKING • Also defective products should be returned ESD safe, this to avoid further damaged due to transport and handling. • Also during handling of defective products standard ESD pre-cautions should be taken similar as for good products

21. ESD ITEMS: • ESD GENERAL • ESD TESTING (Destructive) • ESD HANDLING • ESD PACKING • ESD STANDARDS • ESD CONTROL

22. ESD STANDARDS • JESD 625A (adapted by Philips, see SNW-SQ-604) • IEC 61340 - 5 - part 1 & part 2 • EOS/ESD ASSOCIATION (S20.20) • Local Procedure • EN 100 015 STANDARD. • IEC 1330. • Handbook ESD Protection PHILIPS Nijmegen. (RNV-63/A004)

23. ESD ITEMS: • ESD GENERAL • ESD TESTING (Destructive) • ESD HANDLING • ESD PACKING • ESD STANDARDS • ESD CONTROL

24. ESD CONTROL • ESD Training • ESD Audits. • ESD Coordination.

25. ESD CONTROLTraining • Introduction new employees. • Repeat training. • Introduction during internal replacement. • Visitors. • Temporary employees. (O.J.T.)

26. ESD CONTROLAUDITS • TECHNICAL AUDIT: • carry out all necessary periodical measurements and write report. • SYSTEM AUDIT: • check if technical audits are carried out, training is done, etc..

27. ESD ITEMS: • ESD GENERAL • ESD TESTING (Destructive) • ESD HANDLING • ESD PACKING • ESD STANDARDS • ESD CONTROL • QUESTIONS