10 likes | 85 Views
TIPS, TRICKS, AND TECHNIQUES. b y Randy Kamin, CTP. Aliplast rolls & foam sheet goods. Index card cabinets used to store parts - Very convenient. Fast way to loctite & adjust screws. Paint sprayer tank used to hold master cement. Dies and press used to make pads for straps.
E N D
TIPS, TRICKS, AND TECHNIQUES by Randy Kamin, CTP Aliplast rolls & foam sheet goods Index card cabinets used to store parts - Very convenient Fast way to loctite & adjust screws Paint sprayer tank used to hold master cement Dies and press used to make pads for straps Polypro guard for hacksaw Velcro cabinets Panel saw for cutting plastic sheets Machine room entrance with dusk mask, eye plugs, and eye glasses PVA bag holder: Welded galvanized pipe to wire Automatic vents open & close when machine is on or off 1/32” silicone sheet for vacuum press then we cut out pattern Used on transfer paper for a clear, clean transfer MSDS information by chemical cabinets Razor cutter wheel to cut carbon sheet and Spectralon Thin cotton string to laminate, less expensive than parachute cord Zip-lock bag over scale to prevent mess Wax on/wax off method for swim leg Lathe for cutting pylons. Hole punch for TLSO’s. Locktite in syringe Pipe extension for proximal cast modification