1 / 8

The next 7 slides is what Bill’s simulation shows. All plots shows what ADC see, after the shaper.

The next 7 slides is what Bill’s simulation shows. All plots shows what ADC see, after the shaper. Last slide add in the subtracted ADC samples V(ADC)- V(ADC-delay) The variable are 200ns cables or very short cable Termination at base or no termination

kana
Download Presentation

The next 7 slides is what Bill’s simulation shows. All plots shows what ADC see, after the shaper.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The next 7 slides is what Bill’s simulation shows. • All plots shows what ADC see, after the shaper. • Last slide add in the subtracted ADC samples • V(ADC)- V(ADC-delay) • The variableare • 200ns cables or very short cable • Termination at base or no termination • Signal strength (typical or 9x typical) • Typical is some arbitrary defined signal used in the simulation • 9x typical is used to over drive the shaper

  2. short cables, no termination, T

  3. 200ns cables, no termination, T

  4. 200ns cable, termination, T

  5. short cables, termination, T

  6. 200ns cables, no termination, 9XT

  7. 200ns cable, termination, 9X

  8. 200ns cables, termination, T Subtracted samples

More Related