1 / 27

COST 286 - JTA 2 - EMC analysis of LF unstructured telecom networks Ir. V.Beauvois

COST 286 - JTA 2 - EMC analysis of LF unstructured telecom networks Ir. V.Beauvois (V.Beauvois@ulg.ac.be) University of Liège, Belgium. Cost 286 – JTAs. Cost Action to unify people in Europe working on the same subject no fund except for traveling and organizing meetings & workshops

kathy
Download Presentation

COST 286 - JTA 2 - EMC analysis of LF unstructured telecom networks Ir. V.Beauvois

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. COST 286 - JTA 2 - EMC analysis of LF unstructured telecom networks Ir. V.Beauvois (V.Beauvois@ulg.ac.be) University of Liège, Belgium

  2. Cost 286 – JTAs • Cost Action • to unify people in Europe working on the same subject • no fund except for traveling and organizing meetings & workshops • Cost 286 • EMC aspects of diffused communication systems • PLC is one of the subject • JTA : Joint Technical Actions • JTA2 : EMC & PLC • STSMs : short term scientific missions • Prof. Catrysse, Oostende, Belgium • Prof. Heyno Garbe & Sven Batterman, Hannover, Germany • Prof. Varju, Budapest, Hungary • Prof. Feran Silva, Barcelona, Spain • Prof. Newbury, Open University, UK …

  3. Cost 286 – JTA2 & STSMs • Prof. Catrysse, Oostende, Belgium • Prof. Heyno Garbe & Sven Batterman, Hannover, Germany • Prof. Feran Silva, Barcelona, Spain • Emission of PLC & methods of measurement • (radiated, LCL, AMN, MDF…) • Prof. Newbury, Open University, UK • Emission measurements in Scotland • Prof. Varju, Budapest, Hungary • Emission of PLC & methods of measurement on one-to-one • scale LV network (BME laboratory) • … this week …

  4. Cost 286 – JTA2 & STSMs • Prof. Catrysse, Oostende, Belgium • Emission of PLC & methods of measurement • CISPR/I/PLT framework • (1) Radiated emission by an operated PLC system in situ • (related to the quality of the network and the PLC modem used)

  5. Cost 286 – JTA2 & STSMs • Prof. Catrysse, Oostende, Belgium • Emission of PLC & methods of measurement • (2) How to characterize the power mains network itself ? Unbalance ? • with LISN, LCL or MDF or … ?

  6. Cost 286 – JTA2 & STSMs • Prof. Catrysse, Oostende, Belgium • Emission of PLC & methods of measurement • (3) A PLC modem should be CE (EMC and RTTE directives) • to characterize with a well defined power mains reference network • (“artificial” power mains network needed and described by • DM and CM Z, cable-length, type of wiring, height above ground • plane, K-factor of this wiring, LCL and/or MDF) • To measure : radiated H-field, LCL and/or MDF of the unit, • conducted emission on the mains wiring using a LISN-like setup.

  7. Cost 286 – JTA2 & STSMs • Prof. Newbury, Open University, UK • Emission measurements in Scotland (Crieff & Stonehaven)

  8. JTA 2 – EMC analysis of LF unstructured telecom networks Preliminary results on a PLC U network (emission & immunity) Ir. V.Beauvois (V.Beauvois@ulg.ac.be) Thanks to Pierre and our students

  9. Initial configuration : U network (no PLC) Mains or not C1 on T.G. C2 to Receiver 2.67m 2.67m 3m H 80cm A set of 3 power cords for a total length of 8.34m

  10. Initial configuration : measurement equipments • EMI receiver ESI 26 R&S (20Hz-26GHz) • receiver mode • measurements between 1-30MHz • BW 9kHz • frequency step 6kHz • Pk & Avg detectors • with T.G. • Loop antenna HFH2-Z2 R&S • Coupling devices C1 & C2 (provided by the Open University, UK)

  11. Initial configuration : step 1 • Passive network : not connected to power mains of the building • C1 & C2 at each end of the U network • C2 to ESI receiver (Peak detector) • if C1 is not connected – green curve • if C1 to ESI T.G. (-20dBm) – blue curve

  12. Initial configuration : step 2 • Active network : connected to power mains of the building • C1 & C2 at each end of the U network • C2 to receiver (Peak detector) • if C1 is not connected – green curve • if C1 to T.G. (-20dBm) – blue curve

  13. Initial configuration : step 3 • Passive network : not connected to power mains of the building • C1 to T.G. (-20dBm) • Loop antenna to receiver • Influence of loop orientation • perpendicular to U base at 1m – green curve • parallel to U base at 1m– blue curve

  14. Initial configuration : step 4 • Passive or Active networks: • not or connected to power mains of the building • C1 to T.G. (-20dBm) • Loop antenna to receiver, • parallel to U base at 1m • Influence of power mains • active network – green curve • passive network – blue curve

  15. Second configuration : U network (with PLC) Mains Laptop 2.67m 2.67m Laptop 3m H 80cm A set of 3 power cords for a total length of 8.34m

  16. Second configuration : measurement equipments • EMI receiver ESI 26 R&S (20Hz-26GHz) • receiver mode • measurements between 1-30MHz • BW 9kHz • frequency step 6kHz • Pk & Avg detectors • with T.G. • Loop antenna HFH2-Z2 R&S • Coupling devices C1 & C2 (provided by the Open University, UK) • Powerlan 100 kit Topcom • 2 laptops on batteries

  17. Second configuration : step 1 • Active network : connected to power mains of the building • Loop antenna to receiver Noise floor in the lab Without communication With communication

  18. Second configuration : U network (with PLC) Mains Laptop C1 on T.G. 2.67m 2.67m Laptop 3m H 80cm A set of 3 power cords for a total length of 8.34m

  19. Second configuration : step 2 • Active network : connected to power mains of the building • C1 to T.G. (-20dBm) • Loop antenna to receiver Without communication With communication

  20. Second configuration : U network (with PLC) Mains Laptop 2.67m 2.67m Laptop C2 on ESI 3m H 80cm A set of 3 power cords for a total length of 8.34m

  21. Second configuration : step 3 • Active network : connected to power mains of the building • C2 to receiver Without communication With communication

  22. Second configuration : U network (with PLC) Mains Laptop 2.67m 2.67m Laptop Clamp 3m H 80cm A set of 3 power cords for a total length of 8.34m

  23. Second configuration : immunity equipments • Immunity similar to: • IEC 61000-4-4 : Burst generator EM TEST UCS500 & capacitive clamp • IEC 61000-4-6 : SMY generator + amplifier + EM clamp • 1st time : 150kHz-80MHz with and without AM • 2nd time : 4MHz-21MHz with and without AM • Powerlan 100 kit Topcom • 2 laptops on batteries IEC 61000-4-4 IEC 61000-4-6

  24. Second configuration : Immunity (1) • Burst signals are applied after the ping communication is launched. • Burst during 15ms with a period of 300ms (as in IEC 61000-4-4) • Voltage level is increased progressively • Above a certain voltage level (580V): 50% of the pings are still received • related to the long period without burst … Non received packets (%)

  25. Second configuration : Immunity (2) • Burst signals are applied after the ping communication is launched. • Burst during 15ms with a period of 15ms (as continuously present) • Voltage level is increased progressively • Above a certain voltage level (560V) : on/off mode (off, reboot necessary) 100 Non received packets (%) 0 400 560 1000 Injected level (V)

  26. Second configuration : Immunity (3) • Burst signals are applied after the beginning of a very big file sending. • Burst during 15ms with a period of 300ms • Voltage level is increased progressively • Above a certain voltage level (580V) : the communication is down. • Burst during 15ms with a period of 15ms (as continuously present) • Voltage level is increased progressively • Above a certain voltage level (580V) : the communication slows down, • then the PC is waiting indefinitely until the delay is over • and the transfer is interrupted.

  27. Second configuration : Immunity (4) • [IEC 61000-4-6] • limited to 4-21MHz (related to the used PLC band), step 500kHz, dwell time 5s (5 pings). • without AM 1kHz : voltage level is increased progressively, the communication is • not disturbed or disturbed for a higher level (10-20V)than with AM. • with AM 1kHz : voltage level is increased progressively (largely over 10V), • the communication is on, and then off (0-100% mode). • the level needed to disturb is high because the OFDM modulation is secure. = Max. reachable level (limited by our amplifier)

More Related